Study guide
2.6 Cadastral Field Workflows and Record Keeping
NCEES Fundamentals of Surveying FS
Track your progress as you read
Finished sections get a check mark.
1 Orientation: NCEES FS Exam Registration and Scoring
1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas
2 Surveying Processes, Instrumentation, Control, and Field Workflows
2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping
3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR
3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control
4 Boundary Law: Public Records, Deeds, and Evidence
4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting
5 Boundary Law: Easements, PLSS, Water Law, and Conveyances
5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting
6 Surveying Principles: Geodesy, Datums, Projections, and SPCS
6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality
7 Survey Computations: Bearings, Traverses, Leveling, and COGO
7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets
8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications
8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control
9 Applied Mathematics, Statistics, Measurement Science, and Error
9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units
10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication
10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution
11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics
11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns
12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps
12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail
2.6 Cadastral Field Workflows and Record Keeping
Key Takeaways Explain This Topic AI
Cadastral (boundary) surveys retrace property lines using evidence: found monuments, record deeds/plats, and the hierarchy of calls (senior rights, monuments, then bearings and distances).
The PLSS divides land into 6-mile townships and 1-mile-square sections (~640 acres), with corners that are retraced, not recreated, by the surveyor.
Original physical monuments control over record measurements when they conflict; the surveyor follows the footsteps of the original survey.
Defensible field notes, monument descriptions, ties, and a sealed plat are the permanent legal record of a boundary survey.
Last updated: June 2026
Cadastral Surveys: Retracing, Not Recreating
Cadastral (boundary) surveying establishes, retraces, or documents the limits of real property. Unlike a topographic survey, it is governed as much by law and evidence as by measurement: the surveyor's job is to locate where a boundary already is based on the original survey and the chain of title, not to invent a mathematically tidy line. The guiding principle is to follow the footsteps of the original surveyor.
Evidence is weighed in a recognized priority of calls when descriptions conflict:
- Priority (highest first) Element
- 1 Senior rights (earlier conveyance prevails)
- 2 Written intentions of the parties
- 3 Calls for natural monuments (rivers, lakes)
- 4 Calls for artificial monuments (set pins, original corners)
- 5 Calls for adjoiners
- 6 Courses (bearings) and distances
- 7 Area (acreage), lowest
A frequent FS point: when an original physical monument conflicts with a record bearing and distance , the monument controls , because it is the best evidence of where the original line was actually run.
The PLSS Framework
Most public-land states use the Public Land Survey System (PLSS) , a rectangular framework run from an initial point with a principal meridian (north-south) and a baseline (east-west). The land is divided into:
Townships — nominally 6 miles × 6 miles , located by township (north/south of baseline) and range (east/west of the principal meridian).
Sections — each township is divided into 36 sections , numbered 1–36 in a boustrophedon (back-and-forth) pattern starting in the NE corner.
A standard section is 1 mile square ≈ 640 acres ; a quarter-quarter (e.g., the NE¼ of the NW¼) is about 40 acres .
Because meridians converge and original chains were imperfect, sections are not exactly 640 acres; government lot and aliquot descriptions account for the irregularities along the north and west tiers. The retracing surveyor recovers existing corners — corner monuments, accessories, and bearing trees — and re-establishes lost corners by proportionate measurement only when the original position truly cannot be recovered. A corner is obliterated (recoverable from evidence) versus lost (no evidence) — a distinction the FS exam tests.
Field Workflow and Record-Keeping
A boundary field workflow proceeds from research to evidence to documentation:
Research the deed, plat, prior surveys, and adjoiner records.
Recover monuments — search for original corners and reference (witness) ties; record what is found versus set.
Measure the recovered evidence with control-grade methods and tie found monuments to your control and to each other.
Analyze discrepancies using the priority of calls and senior rights; resolve gaps and overlaps.
Document the result.
Record-keeping is the legal product of the survey. Defensible field notes capture each monument's description, condition, and ties , the measurements, the date and crew, and the reasoning behind boundary decisions. The deliverable is typically a plat or map of survey bearing the surveyor's seal and signature , recorded per state law, plus a written legal description . The FS exam consistently rewards answers that honor original monuments and senior rights and that treat thorough, reproducible records — not the tidiest math — as the basis of a defensible boundary.