Study guide

2.2 GNSS/GPS Survey Modes, Datums, and Field Checks

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

2.2 GNSS/GPS Survey Modes, Datums, and Field Checks

Key Takeaways Explain This Topic AI

Static GNSS post-processes long occupations (often 15 min to 2+ hours by baseline length) for the highest accuracy; RTK delivers real-time centimeter positions from a base-to-rover correction.

Network RTK / VRS uses a CORS network to synthesize corrections near the rover, extending reliable RTK beyond a single base's range.

GNSS yields ellipsoid heights on NAD 83 (2011); a hybrid geoid model such as GEOID18 converts them to NAVD 88 orthometric heights (H = h − N).

PDOP, satellite count, multipath, and a checked-into-a-known-point fixed solution are the core RTK field-quality checks.

Last updated: June 2026

Survey Modes: Static, RTK, and Network/VRS

GNSS (Global Navigation Satellite System) generalizes GPS to include GLONASS, Galileo, and BeiDou. The FS exam expects you to distinguish three field modes by accuracy and effort.

Static GNSS records simultaneous carrier-phase data at two or more receivers over a baseline, then post-processes to resolve integer ambiguities. Occupation time grows with baseline length and geometry: NGS specifies a minimum of about 15 minutes for short marks, roughly 45 min to 1 hour for baselines near 10 km, and 2 hours or more beyond 20 km. Static yields the highest GNSS accuracy and is the standard for establishing control.

Real-Time Kinematic (RTK) places a receiver on a known base broadcasting corrections to a moving rover , giving centimeter positions in real time. It is efficient for topographic pickup and stakeout but degrades as the base-to-rover distance grows.

Network RTK / Virtual Reference Station (VRS) uses a network of CORS (Continuously Operating Reference Stations) to model atmospheric and orbital errors and synthesize a correction as if a base sat right next to the rover. This extends reliable RTK well beyond a single base and removes the need to occupy a local base.

Heights, Datums, and the Geoid

GNSS measures position relative to an ellipsoid , so it returns ellipsoid height (h) on the NAD 83 (2011) horizontal datum, not the elevation a level would give. To obtain an orthometric height (H) on the NAVD 88 vertical datum, apply a hybrid geoid model such as GEOID18 : H = h − N

where N is the geoid height (the separation between ellipsoid and geoid; negative across most of the conterminous U.S.). GEOID18 is tuned so that NAD 83 (2011) ellipsoid heights produce orthometric heights consistent with published NAVD 88 datasheet values.

  • Quantity Symbol Reference surface
  • Ellipsoid height h NAD 83 ellipsoid (from GNSS)
  • Geoid height N Ellipsoid-to-geoid separation (GEOID18)
  • Orthometric height H NAVD 88 geoid (“sea-level" elevation)

NGS is modernizing the National Spatial Reference System: NAD 83 and NAVD 88 are being replaced by terrestrial reference frames such as NATRF2022 and the geopotential datum NAPGD2022 , after which published coordinates and heights shift by decimeters or more. FS candidates should know which datum a project uses and that mixing datums produces large, systematic blunders.

GNSS Field Checks and Error Sources

A GNSS observation is only as good as its solution quality. Key field checks:

Fixed (not float) solution — RTK is trustworthy only after integer ambiguities are fixed; a float solution can be off by decimeters.

PDOP (Position Dilution of Precision) — a geometry index; lower is better. High PDOP means poor satellite spread and weaker positions.

Satellite count and constellation — more satellites improve geometry and shorten occupation.

Redundancy on a known point — occupying a published control mark or re-observing after re-initialization catches setup and antenna-height blunders.

Multipath and obstructions — reflective surfaces and canopy corrupt the signal; GNSS struggles near buildings or under trees, where a total station may be the better tool.

A frequent FS trap is the antenna height (slant vs. vertical to the antenna reference point) — a measuring blunder there propagates directly into elevation. The exam rewards answers that pair the right mode (static for control, RTK/VRS for production) with the right validity checks and the correct datum/geoid handling.