Study guide
2.4 Road Markings, Lanes & Special Traffic Zones
Finland Driving Theory Test - Category B Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Logistics, Licence Rules & 2026 Legal Framework
1.1 Finland Driving Examination Overview & Ajovarma Test Format 1.2 Driving Licence Permit, Prerequisites & Category B Requirements 1.3 Mandatory Driver Training (EAS & Risk Recognition Training) 1.4 2026 Driving Licence Act Reform & Legal Regulations
2 Chapter 2: Road Signs, Traffic Signals & Road Markings
2.1 Regulatory, Priority & Warning Signs (Road Traffic Act 729/2018) 2.2 Information, Mandatory & Zone Signs 2.3 Traffic Signals & Light Controls 2.4 Road Markings, Lanes & Special Traffic Zones
3 Chapter 3: Priority, Right-of-Way & Traffic Interaction
3.1 Intersections & the Equal-Intersection Right-Hand Rule 3.2 Priority Signs, Stop Signs & Roundabouts 3.3 Pedestrians, Cyclists & Vulnerable Road Users 3.4 Emergency Vehicles, Buses, Trams & Railway Crossings
4 Chapter 4: Safe Driving, Hazard Recognition & Winter Conditions
4.1 Speed Choice, Reaction Time & Stopping Distances 4.2 Winter Driving, Ice, Snow & Tyre Requirements 4.3 Low Visibility, Darkness & Wildlife Hazards (Elk/Reindeer) 4.4 Impairment, Fatigue, Distractions & Emergency Handling
5 Chapter 5: Vehicle Maintenance, Equipment & Eco-Driving
5.1 Vehicle Inspection, Tyre Safety & Equipment Rules 5.2 Loads, Passengers, Seat Belts & Child Safety 5.3 Eco-Driving, Energy Efficiency & Environmental Impact
2.4 Road Markings, Lanes & Special Traffic Zones
Key Takeaways Explain This Topic AI
Center lines separate opposing traffic flows; broken lines (suuntaisviiva 3:1 gap ratio) permit overtaking when safe, whereas continuous white lines (sulkuviiva) strictly prohibit crossing or straddling.
Combination lines consist of a continuous line alongside a broken line; drivers are legally governed strictly by the line immediately adjacent to their lane.
Transverse stop lines (pysäytysviiva) require a complete stop before the line, while give-way lines (väistämisvelvollisuusviiva shark-teeth triangles) mark the yield point.
Zebra pedestrian crossing stripes (suojatiemerkintä) require drivers to yield to pedestrians crossing or stepping onto the stripes and strictly prohibit passing any vehicle stopped before a crossing.
Lane selection arrows (kaistanuolet) dictate mandatory lane choices at upcoming intersections and prohibit lane changing across continuous white lines.
Last updated: July 2026
2.4 Road Markings, Lanes & Special Traffic Zones
Quick Summary: Road markings ( tiemerkinnät ) apply paints, resins, and retroreflective materials directly to pavement surfaces to delineate lanes, define right-of-way boundaries, and restrict vehicle positioning under Road Traffic Act 729/2018. Road markings are divided into Longitudinal Markings ( pituussuuntaiset merkinnät ), Transverse Markings ( poikittaismerkinnät ), and Special Surface Symbols ( muut merkinnät ).
Center Lines & Longitudinal Markings (Pituussuuntaiset merkinnät)
Longitudinal road markings run parallel to the direction of traffic flow, separating opposing traffic streams or organizing multi-lane travel directions.
Broken Center Line (Suuntaisviiva)
A broken white center line ( suuntaisviiva ) separates lanes carrying traffic in opposite directions or adjacent lanes in the same direction.
Dimensions : In urban built-up areas, the standard stroke-to-gap ratio is 1:3 (e.g., 1-meter painted dash followed by a 3-meter unpainted gap). On rural highways, the stroke length increases to 3 meters with a 9-meter gap.
Legal Meaning : Crossing a broken line is permitted for overtaking ( ohittaminen ), turning left, or avoiding roadside obstacles, provided the maneuver can be executed without endangering other traffic.
Continuous White Line (Sulkuviiva)
A continuous solid white line ( sulkuviiva ) indicates a strict legal prohibition.
Prohibition Rule : Motor vehicles must not cross or straddle a continuous white line, nor drive to the left side of a continuous line separating opposing traffic directions.
Lane Boundary Application : Solid white lines are painted approaching intersections, pedestrian crossings, blind crests, and sharp curves to eliminate dangerous lane changes and head-on overtaking collisions. +-----------------------------------------------------------------------------------+
- | LONGITUDINAL ROAD MARKINGS |
- +-----------------------+-----------------------+-----------------------------------+
- | Line Type | Visual Pattern | Legal Crossing Rule |
- +-----------------------+-----------------------+-----------------------------------+
- | Broken Line | --- --- --- | Crossing PERMITTED when safe |
- | (Suuntaisviiva) | | |
- | Continuous Line | _____________________ | Crossing STRICTLY PROHIBITED |
- | (Sulkuviiva) | | |
- | Combination Line | _________ | Crossing permitted ONLY IF broken |
- | (Yhdistelmäviiva) | --- --- --- | line is on YOUR side of lane |
- +-----------------------+-----------------------+-----------------------------------+
- Combination Line (Yhdistelmäviiva)
A combination line features a solid continuous line running parallel immediately alongside a broken line.
Rule of Proximity : A driver is legally bound only by the line closest to their lane .
If the broken line is on your side, you may cross the combination line to overtake or turn left, and return across it.
If the solid line is on your side, you are strictly prohibited from crossing or straddling the line, even if overtaking a slow vehicle.
Transverse Markings: Stop Lines & Give-Way Triangles (Poikittaismerkinnät)
Transverse markings run across driving lanes, indicating precise positions where vehicles must stop or yield.
Stop Line (Pysäytysviiva)
A Stop Line ( pysäytysviiva ) is a solid, wide white line painted transversely across a travel lane. It accompanies a Stop Sign (Sign B6) or a traffic light signal.
Vehicles must come to a complete standstill immediately behind the stop line before proceeding.
Give-Way Line (Väistämisvelvollisuusviiva)
A Give-Way Line ( väistämisvelvollisuusviiva ) consists of a row of small, white painted triangles ("shark's teeth") extending across a lane, pointing toward approaching traffic. It accompanies a Give Way Sign (Sign B5).
Indicates the exact position where a driver must yield right-of-way to intersecting traffic when required. Transverse Stop Line Give-Way Shark's Teeth Line
- =========================== v v v v v v v v
- (Solid transverse line) (Row of small white triangles)
- Must come to COMPLETE STOP Yield point when subject to
- at Stop sign or Red light Sign B5 (Give Way)
- Pedestrian Crossings & Bus Stop Markings
- Pedestrian Zebra Stripes (Suojatiemerkintä)
Pedestrian crossings are marked on the road surface by broad white longitudinal stripes running parallel to traffic flow. Passing Sign E1 accompanies these surface markings.
Duty to Yield : Drivers must yield to pedestrians on or stepping onto the crossing.
Critical Passing Rule ( Suojatiesääntö ) : If a vehicle in an adjacent lane has stopped before a pedestrian crossing, an approaching driver must stop before the crossing before proceeding, unless separated by a physical refuge island or controlled by traffic signals.
Bus Stop Yellow Zig-Zag Markings (Bussipysäkin keltaiset merkinnät)
Yellow zig-zag lines or yellow text reading "BUS" painted on the pavement designate public transport bus stops ( bussipysäkki ).
Stopping or parking any non-bus vehicle on yellow bus stop markings is strictly prohibited, except for momentary stops to pick up or drop off passengers, provided no bus is obstructed.
- Lane Selection Arrows & Hatch Markings (Kaistanuolet ja muut merkinnät)
- Lane Arrows (Kaistanuolet)
White lane arrows painted in driving lanes approaching intersections mandate pre-selection of lane directions (straight, left-turn, or right-turn).
Once a driver enters a lane delineated by solid white lines ( sulkuviiva ), they must follow the direction of the lane arrow and are prohibited from changing lanes.
Hatch Buffer Markings (Kieltoalue / Raitamaalaus)
Slanted parallel white stripes bounded by a solid line mark neutral buffer zones ( kieltoalue ).
Driving, stopping, turning, or parking on hatched buffer zones is strictly prohibited under all circumstances.