Study guide
2.3 Combustion Products & Chemistry
NAFI Certified Fire and Explosion Investigator CFEI
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Investigation Methodology & Scientific Method
1.1 Scientific Method in Fire Investigation 1.2 Scene Safety & Risk Assessment 1.3 Interview Techniques & Information Gathering 1.4 Documentation & Report Writing
2 Chapter 2: Fire Science & Combustion Chemistry
2.1 Fire Tetrahedron & Thermodynamics 2.2 Heat Transfer Mechanisms 2.3 Combustion Products & Chemistry 2.4 Fuel Types & Ignition Temperatures
3 Chapter 3: Fire Behavior & Compartment Fire Dynamics
3.1 Compartment Fire Stages 3.2 Flashover Dynamics & Indicators 3.3 Backdraft & Ventilation Effects 3.4 Heat Release Rate & Fire Growth
4 Chapter 4: Origin Determination & Pattern Analysis
4.1 Fire Pattern Generation & Types 4.2 Char Depth & Calcination Analysis 4.3 Arc Mapping & Spatial Origin Analysis 4.4 Scene Reconstruction & Origin Matrix
5 Chapter 5: Cause Determination & Ignition Sources
5.1 Fire Cause Classification 5.2 Common Ignition Sources & Competency 5.3 Incendiary Fire Indicators 5.4 Negative Corpus & Logical Fallacies
6 Chapter 6: Evidence Collection & Forensic Analysis
6.1 Evidence Preservation & Chain of Custody 6.2 Ignitable Liquid Sampling & Containers 6.3 Forensic Laboratory Testing & ASTM Standards 6.4 Spoliation of Evidence & Legal Risk
7 Chapter 7: Electrical Fire Investigation
7.1 Electrical Fundamentals & Terminology 7.2 Overcurrent & Short Circuit Failures 7.3 High-Resistance Connections & Arcing 7.4 Alternative Energy Systems & PV Hazards
8 Chapter 8: Building Construction & Fire Protection Systems
8.1 Construction Types & Fire Resistance 8.2 Fire Suppression Systems & Sprinklers 8.3 Fire Alarm & Detection Systems 8.4 Fire Barriers, Dampers & HVAC
9 Chapter 9: Legal Considerations & Expert Testimony
9.1 Search & Seizure at Fire Scenes 9.2 Admissibility Standards: Daubert & Frye 9.3 Expert Witness Qualification & Testimony 9.4 Appliance & Product Liability Investigation
10 Chapter 10: Explosion Dynamics & Investigation
10.1 Explosion Fundamentals 10.2 Blast Effects & Damage Characterization 10.3 Gas, Dust & Vapor Cloud Explosions 10.4 Explosion Scene Investigation
11 Chapter 11: Building Fuel Gas Systems
11.1 Natural Gas & LP-Gas System Fundamentals 11.2 Fuel Gas Appliances & Utilization Equipment 11.3 Investigating Fuel Gas System Incidents
12 Chapter 12: Motor Vehicle Fire Investigation
12.1 Vehicle Fire Fundamentals, Fuels, Ignition Sources & Safety 12.2 Vehicle Fire Scene Examination & Total Burns 12.3 Special Vehicles: RVs, Heavy/Ag Equipment, Vehicles in Structures, Towing 12.4 Hybrid, Electric & Hydrogen Vehicle Fire Investigation
13 Chapter 13: Wildfire Investigations
13.1 Wildfire Terminology, Fire Behavior & Pattern Indicators 13.2 Wildfire Scene Safety & Origin Determination 13.3 Wildfire Cause Determination
14 Chapter 14: Advanced Analysis & Special Topics
14.1 Fire & Explosion Deaths and Injuries 14.2 Failure Analysis & Analytical Tools 14.3 Fire-Related Human Behavior 14.4 Complex, Multi-Party & Marine Investigations
2.3 Combustion Products & Chemistry
Key Takeaways Explain This Topic AI
Combustion products fall into four major categories: combustion gases, flame/light, heat, and solid particulate matter (soot and ash).
Carbon monoxide (CO) is a toxic, flammable gas (LFL = 12.5%, UFL = 74%) produced during incomplete combustion, acting as a primary asphyxiant in fire fatalities and a potential fuel source for secondary explosions/backdrafts.
Hydrogen cyanide (HCN) is produced during the thermal decomposition of nitrogen-containing synthetic polymers (e.g. polyurethane, nylon, acrylonitrile) and acts synergistically with CO to rapidly incapacitate victims.
Soot is composed of microscopic carbonaceous particles and polycyclic aromatic hydrocarbons (PAHs), serving as a crucial indicator for fire pattern analysis, flow paths, and line-of-demarcation identification under NFPA 921.
Pyrolysis of halogenated polymers such as polyvinyl chloride (PVC) generates corrosive gases like hydrogen chloride (HCl), which can cause rapid acid etching on metallic surfaces and electrical components.
Last updated: July 2026
2.3 Combustion Products & Chemistry
During a structural or wildland fire, the chemical transformation of organic fuels produces a complex mixture of chemical species collectively referred to as combustion products or fire effluent . Under NFPA 921 ( Guide for Fire and Explosion Investigations ) and NFPA 1033 ( Standard for Professional Qualifications for Fire Investigator ), analyzing combustion products provides essential evidence regarding fire origin, fuel identification, room ventilation state, toxicological cause of death, and thermal flow paths.
Combustion products are classified into four major physical categories:
- Combustion Gases (asphyxiant, toxic, irritant, and flammable gases)
- Solid Particulate Matter (soot, unburned carbon, and inorganic ash)
- Thermal Energy / Heat
- Luminous Radiation / Flame
- 1. Stoichiometric vs. Incomplete Combustion Chemistry
When a pure hydrocarbon fuel ( C x H y C_xH_y C x H y ) undergoes complete stoichiometric combustion in pure oxygen, the oxidation reactions yield only carbon dioxide ( C O 2 CO_2 C O 2 ) and water vapor ( H 2 O H_2O H 2 O ): C x H y + ( x + y 4 ) O 2 → x C O 2 + y 2 H 2 O C_xH_y + \left(x + \frac{y}{4}\right) O_2 \to x CO_2 + \frac{y}{2} H_2O C x H y + ( x + 4 y ) O 2 → x C O 2 + 2 y H 2 O
However, real-world compartment fires rarely achieve complete stoichiometric combustion. As fires become ventilation-controlled (equivalence ratio ϕ > 1.0 \phi > 1.0 ϕ > 1.0 ), localized oxygen depletion prevents complete oxidation of carbon and hydrogen atoms. Consequently, combustion effluent contains a hazardous array of incomplete combustion products, including carbon monoxide ( C O CO CO ), hydrogen cyanide ( H C N HCN H CN ), aldehydes, acrolein, organic acids, polycyclic aromatic hydrocarbons (PAHs), unburned hydrocarbons (UHC), and soot. [ ORGANIC FUEL PYROLYSIS ]
- │
- ▼
- [ GAS-PHASE FREE RADICALS ]
- │
- ┌───────────────────────┴───────────────────────┐
- ▼ ▼
- [ OXYGEN RICH (ϕ < 1.0) ] [ OXYGEN POOR (ϕ > 1.0) ]
- (Complete Oxidation) (Incomplete Combustion)
- │ │
- ┌──────┴──────┐ ┌──────────────┼──────────────┐
- ▼ ▼ ▼ ▼ ▼
- [ CO₂ ] [ H₂O ] [ CO ] [ HCN ] [ SOOT / PAHs ]
- 2. Carbon Monoxide (CO) Kinetics & Toxicology
Carbon Monoxide ( C O CO CO ) is an odorless, colorless, tasteless gas produced whenever carbonaceous fuels undergo incomplete combustion. In fire investigation, C O CO CO is critical for both toxicological analysis and fire explosion assessment.
Toxicological Dynamics
Carbon monoxide is a chemical asphyxiant. When inhaled, C O CO CO diffuses across the alveolar membrane into the bloodstream and binds to hemoglobin with an affinity approximately 200 to 250 times greater than oxygen , forming carboxyhemoglobin (COHb) : Hb + C O ⇌ COHb \text{Hb} + CO \rightleftharpoons \text{COHb} Hb + CO ⇌ COHb
COHb prevents oxygen transport to vital body tissues and inhibits oxygen release from remaining oxyhemoglobin.
Normal baseline COHb : 0.5 % − 2.0 % 0.5\% - 2.0\% 0.5% − 2.0% (up to 5 % − 10 % 5\% - 10\% 5% − 10% in heavy tobacco smokers).
Incapacitating COHb : 20 % − 40 % 20\% - 40\% 20% − 40% , causing severe headache, confusion, dizziness, and motor impairment.
Lethal COHb : ≥ 50 % \ge 50\% ≥ 50% , leading to coma, respiratory failure, and death.
Forensic pathologists test blood samples from fire victims for COHb. A high COHb level ( > 50 % >50\% > 50% ) provides definitive proof that the individual was alive and actively breathing during the fire. Conversely, low COHb levels in a victim recovered from a burned structure suggest death occurred prior to fire exposure (e.g., homicide or sudden cardiac arrest) or from rapid toxic cyanide asphyxiation.
Physical Flammability and Backdraft Hazard
Many investigators overlook the fact that carbon monoxide is itself a flammable gas :
Lower Flammable Limit (LFL) : 12.5 % 12.5\% 12.5% by volume in air.
Upper Flammable Limit (UFL) : 74.0 % 74.0\% 74.0% by volume in air.
Autoignition Temperature (AIT) : 609 ∘ C 609^\circ\text{C} 60 9 ∘ C ( 1128 ∘ F 1128^\circ\text{F} 112 8 ∘ F ).
In vitiated, oxygen-depleted compartment fires, unburned C O CO CO accumulates in massive quantities in the hot upper layer. If a window breaks or a door is opened, introducing fresh atmospheric oxygen, this hot C O CO CO -rich atmosphere can ignite explosively, producing a backdraft or smoke explosion .
3. Synthetic Polymer Effluents: Hydrogen Cyanide (HCN) and Acid Gases
Modern residential and commercial environments are dominated by synthetic polymer furnishings, which generate uniquely toxic and corrosive effluents during pyrolysis.
Hydrogen Cyanide (HCN)
Hydrogen Cyanide ( H C N HCN H CN ) is a rapid-acting cellular asphyxiant gas produced during the pyrolysis of nitrogen-containing polymers, including:
- Flexible polyurethane foam (upholstered furniture cores, carpet padding)
- Nylon fabrics and carpets
- Melamine resins and Acrylonitrile Butadiene Styrene (ABS) plastics
- Natural wool and silk
Unlike C O CO CO , which targets hemoglobin in blood, H C N HCN H CN inhibits the enzyme cytochrome c oxidase within cellular mitochondria, arresting cellular ATP respiration even when oxygen is present in blood.
IDLH (Immediately Dangerous to Life or Health) : 50 ppm 50 \text{ ppm} 50 ppm .
Synergistic "Toxic Twins" Effect : Combined exposure to C O CO CO and H C N HCN H CN produces a synergistic toxic effect where H C N HCN H CN hyperventilation increases C O CO CO uptake, causing rapid incapacitation in less than 2 to 3 minutes.
Hydrogen Chloride (HCl) and Acid Etching
Pyrolysis of Polyvinyl Chloride (PVC) —widely used in electrical wire insulation, conduit, plumbing pipes, and vinyl flooring—undergoes thermal dehydrochlorination at 200 ∘ C − 300 ∘ C 200^\circ\text{C} - 300^\circ\text{C} 20 0 ∘ C − 30 0 ∘ C , releasing Hydrogen Chloride ( H C l HCl H Cl ) gas.
When H C l HCl H Cl gas combines with humidity or combustion water vapor, it forms hydrochloric acid mist . This acid deposits on cool metallic surfaces, producing:
Severe acid etching, pitting, and green/black tarnishing on copper electrical conductors.
Corrosion of electronic circuit boards and relay contacts, which can complicate post-fire electrical arc failure analysis.
4. Soot Synthesis, Structure, and Deposition Patterns
Soot is the solid carbonaceous particulate matter suspended in fire effluent. It is formed in fuel-rich regions of flames through complex gas-phase condensation kinetics. [ Pyrolysis Hydrocarbon Volatiles ]
- │
- ▼
- [ Polycyclic Aromatic Hydrocarbons (PAHs) ]
- │
- ▼ (Nucleation)
- [ Spherical Carbon Nanoparticles (10 - 50 nm) ]
- │
- ▼ (Agglomeration)
- [ Chain-Like Microscopic Soot Clusters ]
- │
- ▼ (Thermophoresis & Buoyancy)
- [ Soot Deposition Patterns on Surfaces / Windows ]
- Thermophoresis
Soot particles move through gas atmospheres under the influence of temperature gradients—a process called thermophoresis . Soot particles are driven away from hot gas regions and deposit preferentially onto cold structural surfaces (e.g., cool drywall, window glass, concrete floors).
Forensic Application under NFPA 921
Lines of Demarcation : Heavy soot accumulation on vertical walls clearly delineates the interface between the hot upper gas layer and cool lower air layer during early fire growth.
Soot Texture and Fuel Identification :
Oily, Sticky, Dense Soot : Indicates pyrolysis of synthetic polymers (e.g., polyurethane, polystyrene, fuel oils, heavy liquid hydrocarbons).
Dry, Flaky, Light Soot : Indicates combustion of cellulosic solid fuels (e.g., untreated wood, paper, cotton).
Clean Burn Patterns : High-temperature direct flame impingement ( > 700 ∘ C >700^\circ\text{C} > 70 0 ∘ C ) or extreme radiative heat burns away pre-existing soot deposits from non-combustible surfaces (masonry, concrete, metal studs), leaving a clean, bare surface. Under NFPA 921, clean burn patterns indicate intense localized heat exposure often near a fire origin.
5. Major Combustion Products Summary
Effluent Species Source Material Toxic / Flammable Hazard IDLH Threshold Forensic / Investigation Significance
Carbon Monoxide ( C O CO CO ) Incomplete combustion of all carbonaceous fuels Chemical asphyxiant ( C O H b COHb CO H b formation); Flammable ( 12.5 % − 74 % 12.5\%-74\% 12.5% − 74% ) 1200 ppm Victim blood C O H b > 50 % COHb >50\% CO H b > 50% indicates breathing during fire; upper layer accumulation drives backdrafts.
Hydrogen Cyanide ( H C N HCN H CN ) Nitrogenous fuels (polyurethane, nylon, wool, ABS) Cellular respiratory asphyxiant (cytochrome oxidase inhibitor) 50 ppm Synergistic toxicity with C O CO CO ; rapid victim incapacitation in modern synthetic upholstery fires.
Hydrogen Chloride ( H C l HCl H Cl ) Polyvinyl chloride (PVC) insulation, pipes, vinyl Severe respiratory irritant; corrosive acid mist 50 ppm Acid etching and heavy green/black tarnishing on copper wire; corrosion of electronic boards.
Soot Particulates Unburned carbon condensates from fuel-rich flames Respiratory barrier; light extinction (obscuration) N/A Thermophoresis deposits define flow paths, upper layer lines of demarcation, and clean burns.
Carbon Dioxide ( C O 2 CO_2 C O 2 ) Complete oxidation of carbon fuels Simple asphyxiant; hyperventilation stimulant 40,000 ppm Stimulates increased respiration rate, accelerating toxic intake of C O CO CO and H C N HCN H CN .