Study guide
13.1 Wildfire Terminology, Fire Behavior & Pattern Indicators
NAFI Certified Fire and Explosion Investigator CFEI
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Investigation Methodology & Scientific Method
1.1 Scientific Method in Fire Investigation 1.2 Scene Safety & Risk Assessment 1.3 Interview Techniques & Information Gathering 1.4 Documentation & Report Writing
2 Chapter 2: Fire Science & Combustion Chemistry
2.1 Fire Tetrahedron & Thermodynamics 2.2 Heat Transfer Mechanisms 2.3 Combustion Products & Chemistry 2.4 Fuel Types & Ignition Temperatures
3 Chapter 3: Fire Behavior & Compartment Fire Dynamics
3.1 Compartment Fire Stages 3.2 Flashover Dynamics & Indicators 3.3 Backdraft & Ventilation Effects 3.4 Heat Release Rate & Fire Growth
4 Chapter 4: Origin Determination & Pattern Analysis
4.1 Fire Pattern Generation & Types 4.2 Char Depth & Calcination Analysis 4.3 Arc Mapping & Spatial Origin Analysis 4.4 Scene Reconstruction & Origin Matrix
5 Chapter 5: Cause Determination & Ignition Sources
5.1 Fire Cause Classification 5.2 Common Ignition Sources & Competency 5.3 Incendiary Fire Indicators 5.4 Negative Corpus & Logical Fallacies
6 Chapter 6: Evidence Collection & Forensic Analysis
6.1 Evidence Preservation & Chain of Custody 6.2 Ignitable Liquid Sampling & Containers 6.3 Forensic Laboratory Testing & ASTM Standards 6.4 Spoliation of Evidence & Legal Risk
7 Chapter 7: Electrical Fire Investigation
7.1 Electrical Fundamentals & Terminology 7.2 Overcurrent & Short Circuit Failures 7.3 High-Resistance Connections & Arcing 7.4 Alternative Energy Systems & PV Hazards
8 Chapter 8: Building Construction & Fire Protection Systems
8.1 Construction Types & Fire Resistance 8.2 Fire Suppression Systems & Sprinklers 8.3 Fire Alarm & Detection Systems 8.4 Fire Barriers, Dampers & HVAC
9 Chapter 9: Legal Considerations & Expert Testimony
9.1 Search & Seizure at Fire Scenes 9.2 Admissibility Standards: Daubert & Frye 9.3 Expert Witness Qualification & Testimony 9.4 Appliance & Product Liability Investigation
10 Chapter 10: Explosion Dynamics & Investigation
10.1 Explosion Fundamentals 10.2 Blast Effects & Damage Characterization 10.3 Gas, Dust & Vapor Cloud Explosions 10.4 Explosion Scene Investigation
11 Chapter 11: Building Fuel Gas Systems
11.1 Natural Gas & LP-Gas System Fundamentals 11.2 Fuel Gas Appliances & Utilization Equipment 11.3 Investigating Fuel Gas System Incidents
12 Chapter 12: Motor Vehicle Fire Investigation
12.1 Vehicle Fire Fundamentals, Fuels, Ignition Sources & Safety 12.2 Vehicle Fire Scene Examination & Total Burns 12.3 Special Vehicles: RVs, Heavy/Ag Equipment, Vehicles in Structures, Towing 12.4 Hybrid, Electric & Hydrogen Vehicle Fire Investigation
13 Chapter 13: Wildfire Investigations
13.1 Wildfire Terminology, Fire Behavior & Pattern Indicators 13.2 Wildfire Scene Safety & Origin Determination 13.3 Wildfire Cause Determination
14 Chapter 14: Advanced Analysis & Special Topics
14.1 Fire & Explosion Deaths and Injuries 14.2 Failure Analysis & Analytical Tools 14.3 Fire-Related Human Behavior 14.4 Complex, Multi-Party & Marine Investigations
13.1 Wildfire Terminology, Fire Behavior & Pattern Indicators
Key Takeaways Explain This Topic AI
NFPA 921 (2024) Sec. 27.4 directs investigators to the wildfire-specific definitions added to the general definitions chapter at Sec. 3.5, distinguishing advancing, lateral, and backing fire from the general origin area, specific origin area, and ignition area.
Wildland fire behavior is governed by the fire behavior triangle -- fuel, weather, and topography -- and the resulting rate and direction of spread are the foundation for every fire pattern indicator discussed in Sec. 27.7.
Fire pattern indicators are organized by macroscale (large objects, broad fire behavior context) and microscale (small fuels, subtle clustered effects) evidence, and both NFPA 921 and NWCG guidance require interpreting indicators in clusters, never in isolation.
Protection, grass stem, angle of char, cupping, spalling, and white ash indicators each carry documented reliability limits, such as suspended fuels or wind-transported ash, that a competent investigator must weigh before assigning directional significance.
The 2024 revision substantially expanded Chapter 27 while preserving the scientific method as the controlling methodology for wildfire origin and cause work.
Last updated: July 2026
13.1 Wildfire Terminology, Fire Behavior & Pattern Indicators
NFPA 921 (2024 edition), Guide for Fire and Explosion Investigations , addresses wildland fire investigation in Chapter 27, Wildfire Investigations (Sec. 27.1 through 27.10). The 2024 revision was the first major rewrite of this chapter since the 2011 edition, when it was numbered Chapter 26. The Technical Committee on Fire Investigations rewrote the chapter with input from the wildland fire investigation community while maintaining the centrality of the scientific method that governs every other chapter of the standard. For the CFEI candidate, Chapter 27 is best understood as a wildland-specific overlay on the same methodology already taught for structure fires in Chapters 4 (Basic Methodology), 6 (Fire Patterns), and 18 (Origin Determination) — the underlying logic does not change; only the fuels, the scale of the scene, and a set of unique terms and pattern indicators change.
Scope, Purpose, and the 2024 Revision (27.1–27.3)
Sections 27.1 (Introduction), 27.2 (Scope), and 27.3 (Purpose) frame the chapter's role: Chapter 27 supplements, rather than replaces, the general origin-and-cause methodology found elsewhere in NFPA 921. It applies whenever an investigator examines a fire in the wildland — an area where development is essentially nonexistent apart from roads, railroads, powerlines, and similar transportation facilities, and where any structures present are widely scattered. The chapter's purpose is to supply discipline-specific terminology, fire science, pattern-indicator guidance, safety considerations, and origin/cause methodology tailored to vegetation fuels and open landscapes, which behave and leave evidence very differently than compartmentalized structure fires.
Wildfire-Specific Terminology (27.4)
Section 27.4 is new to the 2024 edition and directs investigators to a companion terminology set the committee added to the standard's general definitions chapter at Sec. 3.5, Terminology Specific to Wildfire Investigations . The committee drew these definitions from the National Wildfire Coordinating Group's (NWCG) Glossary of Wildland Fire Terminology and Guide to Wildland Fire Origin and Cause Determination (PMS 412) — the same reference documents used to train NWCG-certified wildland fire investigators. Mastering this vocabulary is a prerequisite for every later CFEI wildfire topic, because the terms describe both fire behavior (how the fire moved) and fire evidence (where the fire started).
Fire Progression Terminology
Term NFPA 921 (Sec. 3.5) Definition
Advancing fire Fire characterized by rapid spread and higher intensity, normally burning with the wind or upslope; also called a forward fire or a run.
Backing fire A fire spreading against the wind or downslope.
Lateral fire Rate of spread and intensity falling between advancing and backing, spreading toward the flanks of the main direction of travel; also called a flanking fire.
Fire head The portion of the fire moving most rapidly.
Heel The opposite end of the fire from the head.
Transition zone Where random or erratic fire travel changes into fire effects that indicate a directional spread — lateral, advancing, or backing.
Crown fire A fire advancing top-to-top through trees or shrubs, largely independent of a surface fire; further classified as passive, active, or independent.
Fuel Terminology
Fuels in the wildland are stratified by height above the ground, because that stratification drives how a fire moves vertically and how fast it spreads horizontally:
Ground fuels — everything between the mineral soil and the ground surface: litter, duff (decomposing organic material lying below the fresh litter layer and above mineral soil), buried limbs, and roots.
Surface fuels — ignitable material from the ground to roughly 2 m (6 ft): grasses, leaves, twigs, needles, field crops, slash, and downed limbs.
Aerial fuels — material from roughly 2 m (6 ft) up to the canopy: branches, leaves, needles, snags, moss, and tall brush.
Firebrand (or ember) — flaming or glowing fuel particles carried by wind, convection, or gravity into unburned fuel; the mechanism behind spotting well ahead of a fire's main front.
Origin-Area Terminology
Because a wildland origin is rarely a single burned object the way a structure origin can be, NFPA 921 defines a funnel of three progressively smaller areas, covered fully in Sec. 13.2 of this guide:
General origin area — the larger area where the fire first established itself, identified from fire behavior context, macroscale pattern indicators, and witness statements.
Specific origin area — the smaller area within the general origin area where spread direction was first influenced by fuel, weather, or topography.
Ignition area — the smallest area an investigator can define from physical pattern-indicator evidence, within the specific origin area, where a competent ignition source contacted the first fuel ignited.
Wildland Fire Science and Basic Methodology (27.5–27.6)
Section 27.6 applies the combustion science already taught elsewhere in NFPA 921 — heat transfer, ignition, and fire growth — to open, vegetated environments. Rate and direction of spread in the wildland are governed by three interacting factors often called the fire behavior triangle :
Fuel — type, loading (mass per unit area), moisture content, particle size, and continuity (horizontal and vertical). Fine, dead fuels (grasses, needle litter) ignite and carry fire far faster than large, live, or heavy fuels.
Weather — wind speed and direction (the single greatest influence on rate of spread and flame lean), relative humidity, and ambient temperature, all of which govern fuel moisture and the rate of preheating ahead of the flame front.
Topography — slope and aspect. Fire preheats uphill fuel more efficiently through radiation and convection, so upslope rate of spread increases sharply as slope angle increases; aspect (sun exposure) affects fuel moisture and, in turn, availability to burn.
Section 27.5, Basic Methodology, reaffirms that wildland investigation still follows the scientific method: recognize the need, define the problem, collect data, analyze the data both inductively and deductively, develop a hypothesis, and test that hypothesis against all collected evidence — never against only the evidence that supports a preferred conclusion. The wildland-specific application of that method is a systematic, outside-in search that starts wherever fire behavior was clearly advancing and traces macroscale indicators backward toward the origin, a process detailed fully in Sec. 13.2.
Fire Pattern Indicators (27.7)
Section 27.7 catalogs the fire pattern indicators (FPIs) unique to vegetation, soil, and other wildland fuels. Two governing principles apply to every indicator below:
Scale matters. Macroscale indicators are visible on larger objects (logs, trees, rock faces) and are often visible from a distance; microscale indicators require close examination of small fuels (grass clumps, pinecones, small stumps, brush, even animal droppings) and are used to validate or substitute for macroscale evidence where it is absent.
Clusters, not isolation. No single indicator is conclusive. NFPA 921 and NWCG methodology both require interpreting multiple, mutually reinforcing indicators together before assigning directional or origin significance.
Fire Pattern Indicator Categories
Category What It Shows Key Reliability Note
Protection A combustible or noncombustible object shields fuel on its unexposed side, leaving a clean burn line on the exposed side and ragged/unburned fuel on the shielded side. Most reliable at low-to-moderate fire intensity; unreliable on pithy stalks and on fuels suspended above the ground, where wind-driven flame wrap can damage the "unexposed" side and reverse the apparent direction.
Grass stem Charred grass stems fall or lean in a direction related to fire travel; heads/stalks can mark lateral transition zones. Best applied at transition zones between backing and lateral areas; appearance differs between advancing and backing fire.
Angle of char Char forms at an angle on stems and small vegetation, oriented by the direction of flame travel and heat. Interpret together with grass stem and cupping indicators as a cluster, never alone.
Cupping A concave, cup-shaped char pattern on small vegetation, generally on the side facing the flame. Not reliable on larger stumps or trunks.
Spalling Fracturing of rock surfaces from rapid heating, generally on the flame-exposed side. Typically observed only in advancing-fire areas.
Sooting / staining Deposits of soot or discoloration on rocks, poles, or other surfaces. Among the more reliable indicators, especially when clustered with protection evidence.
White ash deposit / exposure Complete combustion leaves white ash on the exposed side of an object; wind can also transport and deposit fine white ash downwind of its point of formation. Must distinguish ash formed in place from ash that was blown and deposited elsewhere — windblown ash in a backing area can appear on the upwind side of an object.
Freezing Melted or softened material (such as sap, resin, or plastic) that re-solidifies, "freezing" a directional drip or flow pattern in place. Corroborating indicator only; verify against material type and melting behavior.
V- or U-shaped pattern A macroscale burn pattern where advancing fuel consumption narrows toward the backing/lateral transition zones. Marks the approach toward the specific origin area; do not confuse with structure-fire "V patterns," which have different underlying causation.
Investigative Significance: Because every FPI category carries documented "possible variances" (suspended fuels, pithy stalks, wind-transported ash, and similar exceptions), a CFEI-level investigator never anchors an origin determination to a single indicator. NFPA 921 Sec. 27.7 and the NWCG PMS 412 guide both frame indicator reliability as a spectrum, not a binary, and both require the investigator to disclose in the final report which indicators were relied upon and why.