Study guide
6.3 Wigs, Hairpieces & Hair Additions
Florida Barber License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Microbiology, Infection Control & Transmission
1.1 Principles of Infection & Microbiology 1.2 Levels of Decontamination: Cleaning, Disinfection & Sterilization 1.3 EPA-Registered Disinfectants & Immersion Protocols 1.4 HIV, Hepatitis B & Hepatitis C in the Barbershop 1.5 Personal Health, Hygiene & Professional Conduct
2 Chapter 2: Barbershop Sanitation, Blood Spill & Facilities
2.1 Implement & Tool Disinfection Procedures 2.2 Blood Spill Protocols & Universal Precautions 2.3 Barbershop Facility Standards & Environment Requirements 2.4 Storage, Labeling & Disposal of Equipment, Chemicals & Supplies 2.5 First Aid & Emergency Response in the Barbershop
3 Chapter 3: Florida Statutes Chapter 476 (Barber Practice Act)
3.1 Purpose of Regulation, Statutory Definitions & Exemptions 3.2 Scope of Barbering Practice & Licensure Classifications 3.3 Qualifications, Schooling & Examination Requirements 3.4 Prohibited Acts, Violations & Statutory Penalties
4 Chapter 4: Florida Administrative Code Rule 61G3 (Barbers' Board Rules)
4.1 Barbers’ Board Membership, Organization & Powers 4.2 Board Authority, Enforcement & Disciplinary Guidelines 4.3 License Renewal, Continuing Education & Inactive Status 4.4 Barbershop Licensure, DBPR Inspections & Workstation Display 4.5 Where Barber Services May Be Performed & Ownership Changes
5 Chapter 5: Haircutting Anatomy, Implements & Techniques
5.1 Cranial Reference Points, Facial Morphology & Consultation 5.2 Barbering Tools, Implements & Ergonomics 5.3 Elevation Angles, Sectioning & Guideline Principles 5.4 Fading, Tapering & Advanced Finishing Techniques 5.5 Shear-Over-Comb, Clipper-Over-Comb & Freehand Taper Cutting
6 Chapter 6: Styling, Thermal Work & Hair Additions
6.1 Blow-Drying & Diffuser Techniques 6.2 Thermal Styling: Curling Irons, Pressing Combs & Finger Waving 6.3 Wigs, Hairpieces & Hair Additions
7 Chapter 7: Trichology, Scalp Disorders & Hair Analysis
7.1 Anatomy of Hair & the Follicular Unit 7.2 Hair Growth Cycles & Physical Properties 7.3 Scalp & Hair Disorders, Diseases & Parasitic Infestations 7.4 Hair & Scalp Analysis: Texture, Density, Porosity & Elasticity
8 Chapter 8: Chemical Texture, Relaxing & Hair Coloring Services
8.1 Permanent Waving Chemistry, Wrapping Techniques & Neutralization 8.2 Chemical Hair Relaxers, Hydroxide vs. Thio Chemistry & Lanthionization 8.3 Hair Coloring Principles, Formulations & Predisposition Testing 8.4 Lightening, Bleaching, Toners & Corrective Color 8.5 Re-formation Curl (Soft Curl Permanent) & Chemical Blowouts
9 Chapter 9: Shampooing, Draping & Scalp Treatments
9.1 Client Draping Protocols, Water Safety & Shampoo Chemistry 9.2 Scalp Massage Manipulations, Scientific Brushing & Corrective Care
10 Chapter 10: Straight-Razor Shaving & Facial Grooming
10.1 Standard 14 Shaving Zones & the Four Razor Strokes 10.2 Shave Preparation, Hot Towels & Beard Design
6.3 Wigs, Hairpieces & Hair Additions
Key Takeaways Explain This Topic AI
Wigs and Hairpieces is a named sub-topic of the 15% Hair Cutting and Hair Styling category on the Florida content outline.
A wig covers the entire head; a hairpiece, toupee, or partial covers only a section of the scalp and is blended with the client's own growing hair.
The burn test distinguishes fibre types: human hair burns slowly with a sulfurous odour and leaves a soft ash, while synthetic fibre melts into a hard bead with a chemical odour.
Human hair wigs may be cut, coloured, permed, and thermally styled; most synthetic wigs must never be exposed to a thermal iron or a hot dryer because the fibre melts.
Remy human hair keeps all cuticles aligned root-to-tip, which prevents the tangling and matting that occurs when cuticles run in opposing directions.
Last updated: August 2026
Wigs, Hairpieces & Hair Additions
Blueprint anchor: Hair Cutting & Hair Styling (15%) → Wigs and Hairpieces.
Hair additions sit inside the barber's scope because they are cut, shaped, cleansed and dressed like hair — and because the client wearing one still has a scalp underneath that needs the same sanitary care as everyone else's.
1. Terminology
- Term Definition
- Wig An artificial covering for the entire head , made of human hair, animal hair, or synthetic fibre
Hairpiece / partial A small wig covering only a section of the head, integrated with the client's own growing hair
- Toupee A small hairpiece covering the top or crown , used most commonly for male pattern hair loss
- Cap wig Built on a mesh-fibre base to which hair is attached; usually machine-made
- Capless wig Rows of wefts sewn to strips of elastic; lighter and more ventilated than a cap wig
- Weft A length of hair machine-sewn to a strip of fabric, then attached in rows
Ventilating / hand-tying Knotting individual hairs into a mesh base by hand — the most natural-looking and most expensive construction
Lace front A fine, near-invisible mesh at the front hairline through which hair is hand-tied, creating an undetectable hairline
Hair extension Added hair attached to the client's own growing hair to add length or volume
Integration / hair addition Added hair pulled through an open-weave base with the client's own hair to add density
2. Identifying the Fibre: The Burn Test
The single most reliable identification method, and a classic examination item.
Human hair Synthetic fibre
Burn behaviour Burns slowly , giving off a strong sulfurous odour (like a burnt match or burnt feathers) Melts rather than burns; often self-extinguishes
- Residue Soft, powdery grey ash that crushes between the fingers Hard, plastic bead at the fibre tip
- Odour Sulfur — the same protein signature as burnt hair on a client's head Chemical, acrid, plastic
Why hair smells like sulfur when it burns: the amino acid cysteine in keratin contains sulfur, and burning liberates it. That is the same chemistry underlying the disulfide bond — a useful cross-connection to the trichology material.
- Human hair unit Synthetic unit
- Cut / shape Yes Yes, but the fibre does not respond like hair
Colour / lighten Yes, with care — the hair is no longer receiving sebum No — most synthetic fibre will not take oxidative colour
Perm / relax Yes, with care No
Thermal iron / hot dryer Yes, with heat protection Generally NO — the fibre melts. Only units expressly labelled heat-friendly tolerate low heat
- Holds a style Must be re-styled after every wash Holds its factory style permanently , even after washing
- Lifespan Longest, with maintenance Shorter; fibre abrades and frizzes at friction points
- Cost Higher Lower
Exam Key: the safest single answer about synthetic fibre is do not apply heat . Its advantage is that it never needs heat — the style is set into the fibre at manufacture and returns after washing.
Human hair grades
Remy human hair keeps all cuticles aligned in the same root-to-tip direction . That alignment is the whole point: when cuticles run in opposing directions they catch on one another, and the unit tangles and mats . Non-Remy hair has been collected without maintaining direction and is often acid-stripped of its cuticle and silicone-coated to compensate — which works until the coating washes off. Virgin hair has never been chemically treated.
3. Measuring and Fitting
Take measurements with a flexible tape, hair flat against the head: 1. Circumference — around the entire hairline, above the ears,
- around the nape
- 2. Front to nape — front hairline over the crown to the nape
- 3. Ear to ear over — across the top of the head, hairline to hairline
- the forehead
- 4. Ear to ear over — around the back of the head at the occipital
- the top of head
- 5. Temple to temple— around the back
- 6. Nape width — across the nape hairline
A unit that is too tight produces headache, scalp irritation, and traction damage at the client's own hairline. A unit that is too loose shifts. Most cap wigs include adjustable straps or hooks at the nape for fine adjustment.
Prepare the client's own hair flat and secured — braided down, pin-curled, or covered with a wig cap — so the unit sits smoothly and the client's own hair is protected from friction.
4. Cutting and Styling a Unit
Cut it on the client's head where possible. A unit shaped on a block and then fitted will not follow the client's actual head shape or the way the unit sits.
Cut dry, and cut less than you think. Wig hair does not grow back, and the unit is the client's investment.
Point cut and slide cut rather than blunt cut. A blunt line on a unit reads as artificial instantly; broken, irregular ends read as natural.
Thin the perimeter and the hairline so the density gradient resembles a real hairline, which is never uniformly dense at the edge.
Blend a hairpiece into the client's own growing hair by matching length and taper at the junction — the join is where a unit is detected.
Match colour and texture at the perimeter , which is the visible boundary.
5. Attachment
Method Description Notes
Adhesive tape Double-sided tape between base and scalp Removed and replaced regularly; watch for contact dermatitis
Liquid adhesive / bonding glue Applied to the perimeter Strongest hold; requires a proper solvent for removal — pulling a bonded unit tears the client's own hairline
Clips / combs Pressure clips sewn into the base Fast and non-permanent; traction alopecia risk if worn tight and continuously
- Elastic band / adjustable strap Built into a cap Non-damaging; least secure
- Sewn to braids Base sewn to a cornrow foundation Long wear; braids must not be too tight
Traction alopecia is the professional risk. Any attachment that keeps constant tension on the same follicles — tight clips, tight braids, aggressive bonding — will eventually produce permanent hair loss at the tension line, most often at the temples. Rotate attachment points, avoid excessive tension, and give the scalp rest periods.
6. Cleaning, Storage and Florida Sanitation
Human hair units: clean with a mild shampoo formulated for hair additions, in cool water, without rubbing or twisting . Squeeze water out, do not wring. Condition the mid-lengths and ends only — the base is not scalp and does not need conditioner. Air-dry on a wig block or stand.
Synthetic units: wash in cool water with a synthetic-specific product; the factory style returns as it dries. No heat.
Storage: on a block or stand , out of direct sunlight, dust-free.
Detangling: always from the ends upward with a wide-tooth comb or a wig brush, never from the roots down.
Sanitation in a Florida shop
Everything the barber uses on the unit and on the client's own scalp is subject to the same rules as any other service:
Combs, brushes, shears and clippers used on a unit or on the client's scalp are cleansed and immersed in an EPA-registered bactericidal, virucidal and fungicidal hospital disinfectant for one to five minutes under Rule 61G3-19.011(11)(a), F.A.C. , then stored in a clean, closed cabinet or container under (11)(d).
Rule 61G3-19.011(9), F.A.C.: "The use of a brush, comb, or other barbering tool on more than one patron without being sanitized is prohibited." A wig brush is a barbering tool.
A scalp under a unit needs inspection. Occlusion plus perspiration is a favourable environment for fungal and bacterial growth. If the barber finds an inflamed, broken-out, or pus-containing area, Rule 61G3-19.011(4), F.A.C. , requires the escalated hand disinfection — soap and water followed by a 70 to 80 percent rubbing alcohol rinse — immediately afterward. If a suspected contagious disorder is present, the client is referred to a physician and the service is not performed.