Study guide

4.1 Permanent Waving Chemistry and Application

Florida Cosmetology Licensing Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Safety, Infection Control & Sanitation

1.1 Sanitation, Disinfection, and Sterilization 1.2 Bloodborne Pathogens & Emergency Spill Procedures 1.3 OSHA Standards, SDS, and Chemical Safety

2 Chapter 2: Hair & Scalp Anatomy, Diseases & Disorders

2.1 Hair Structure, Composition, and Growth Cycles 2.2 Hair Analysis, Porosity, and Elasticity 2.3 Diseases, Disorders, and Conditions of the Hair & Scalp

3 Chapter 3: Hair Design, Cutting & Styling

3.1 Client Draping and Scalp Care Services 3.2 Principles of Haircutting and Sectioning 3.3 Wet Styling, Thermal Styling, and Roller Sets

4 Chapter 4: Chemical Services & Hair Coloring

4.1 Permanent Waving Chemistry and Application 4.2 Chemical Hair Relaxing and Softening 4.3 Hair Coloring and Lightening Principles 4.4 Color Formulation and Patch Testing

5 Chapter 5: Skin Care, Makeup & Hair Removal

5.1 Skin Anatomy and Consultation 5.2 Facial Treatments and Massage Techniques 5.3 Hair Removal (Waxing and Tweezing) 5.4 Makeup Application and Safety

6 Chapter 6: Nail Care Services & Nail Anatomy

6.1 Nail Structure, Growth, and Anatomy 6.2 Diseases and Disorders of the Nails 6.3 Manicuring, Pedicuring, and Massage 6.4 Artificial Nails, Acrylics, Gels, and Wraps

7 Chapter 7: Florida Laws, Rules & Regulations

7.1 The Florida Cosmetology Act (Chapter 477) 7.2 Florida DBPR Rules and Board Structure (61G5) 7.3 Salon Licensing, Sanitation Codes, and Inspections 7.4 Professional Licensure, Renewal, and CE Rules

4.1 Permanent Waving Chemistry and Application

Key Takeaways Explain This Topic AI

Permanent waving breaks strong chemical disulfide bonds via reduction and reforms them via oxidation using a neutralizer.

Alkaline (cold) waves use ammonium thioglycolate (ATG) as the reducing agent, operating at a pH of 9.0 to 9.6 at room temperature.

True acid waves use glyceryl monothioglycolate (GMTG), have a pH of 4.5 to 7.0, and require external heat, whereas acid-balanced waves have a pH of 7.8 to 8.2.

Neutralization is a chemical process that stops the waving solution and reforms disulfide bonds using an oxidizing agent, typically 1% to 2% hydrogen peroxide (5 to 10 volume).

Base control determines volume: on-base placement is wrapped at a 45-degree angle beyond perpendicular for maximum volume, while half-off base uses a 90-degree angle.

Last updated: July 2026

4.1 Permanent Waving Chemistry and Application

Permanent waving is a two-step process that chemically alters the hair's natural wave pattern to create curls or waves. Understanding the chemistry and application of permanent waving is a foundational requirement for Florida cosmetologists, as it combines physical techniques with precise chemical reactions to safely restructure hair keratin.

The Chemistry of Permanent Waving: Physical vs. Chemical Actions

The permanent waving process involves both a physical action and a chemical action . The physical action includes sectioning the hair, wrapping it on perm rods, and selecting the appropriate rod size and tension. The chemical action involves the application of a permanent waving solution (a reducing agent) and a neutralizer (an oxidizing agent).

Hair is made of keratin , a fibrous protein composed of polypeptide chains linked by three types of side bonds:

Hydrogen bonds : Weak physical side bonds that are easily broken by water or heat and reformed as the hair dries or cools.

Salt bonds : Weak physical side bonds that are broken by changes in pH and reform when the pH is restored.

Disulfide bonds : Strong chemical side bonds that are formed by the joining of two sulfur atoms from neighboring cysteine amino acids. These bonds can only be broken by chemical solutions (like permanent waving or relaxing solutions) and reformed via oxidation.

During permanent waving, the waving solution breaks disulfide bonds through reduction . This reaction adds hydrogen atoms to the sulfur atoms, breaking the sulfur-to-sulfur links to create cysteine amino acids.

Alkaline vs. Acid Permanent Waves

Permanent waving solutions are classified primarily by their active ingredients and pH levels.

Wave Type Active Reducing Agent pH Range Hair Types & Characteristics

Alkaline (Cold) Waves Ammonium Thioglycolate (ATG) 9.0 - 9.6 Coarse, thick, or resistant hair. Processes at room temperature without external heat.

True Acid Waves Glyceryl Monothioglycolate (GMTG) 4.5 - 7.0 Fine, damaged, or color-treated hair. Requires external heat (endothermic).

Acid-Balanced Waves Glyceryl Monothioglycolate (GMTG) 7.8 - 8.2 Normal, fine, or color-treated hair. Processes at room temperature; faster than true acid.

Alkaline Waves (Cold Waves)

Alkaline waves, also known as cold waves , use ammonium thioglycolate (ATG) as the reducing agent. With a high pH of 9.0 to 9.6, they swell the hair shaft and penetrate the cuticle quickly. They are ideal for coarse, thick, or resistant hair and process at room temperature without heat.

Acid Waves

Acid waves use glyceryl monothioglycolate (GMTG) as the reducing agent, which is less damaging to hair than ATG.

True Acid Waves : Operating at a pH of 4.5 to 7.0, they process slowly and do not swell the hair as much as alkaline waves. They require external heat (such as a plastic cap under a hood dryer).

Acid-Balanced Waves : These have a pH of 7.8 to 8.2 and process at room temperature without external heat, producing firmer curls faster than true acid waves.

Exothermic vs. Endothermic Waves

Chemical waves are also categorized by how heat is generated or applied during processing:

Exothermic Waves : These generate their own heat through an internal chemical reaction. When the cosmetologist mixes an activator containing an oxidizing agent (usually hydrogen peroxide) into the waving solution, an exothermic (heat-producing) reaction occurs. This heat speeds up the processing time and aids in penetration.

Endothermic Waves : These require an external heat source, such as a hooded hair dryer, to activate the chemical reaction. True acid waves are typically endothermic.

Wrapping Techniques and Patterns

The physical phase of permanent waving is just as critical as the chemical phase. The two main wrapping methods are:

Croquignole Wrap : The hair is wrapped from the ends to the scalp in overlapping concentric layers. This method produces a tighter curl at the ends and a larger, looser curl near the scalp.

Spiral Wrap : The hair is wrapped at an angle other than perpendicular to the length of the rod, resembling the grip on a tennis racket. This creates a uniform curl from the scalp to the ends and is ideal for long hair.

Cosmetologists utilize several wrapping patterns depending on the desired style:

Basic (Straight) Set / 9-Panel Wrap : A standard pattern where the hair is divided into nine panels, matching the width of the perm rods.

Bricklay Wrap : Rods are positioned in a staggered pattern, similar to how bricks are laid in a wall. This prevents noticeable splits or parting lines in the finished style.

Curvature Wrap : Follows the natural curves of the head, using pie-shaped sections to transition smoothly around the cranium.

Piggyback (Double-Rod) Wrap : Used for very long hair. The hair is wrapped on two rods—one for the mid-shaft to scalp, and another for the ends—ensuring even solution penetration and curl formation.

Weave Wrap : Uses zigzag partings to blend the transitioned areas between rods, creating a highly natural look.

Base Control and Placement

Base control refers to the position of the perm rod in relation to its base section, determined by the angle at which the hair is wrapped:

On-Base Placement : Hair is projected at a 45-degree angle beyond perpendicular to its base section. The rod sits directly on its base. This creates maximum volume but puts the most stress on the hair follicle.

Half-Off Base Placement : Hair is projected at a 90-degree angle (perpendicular) to its base. The rod sits halfway on and halfway off its base. This minimizes tension and provides moderate volume.

Off-Base Placement : Hair is projected at a 45-degree angle below perpendicular . The rod sits completely off its base, resulting in minimal volume and curl at the scalp.

Loading diagram...

The Neutralization Process

Permanent wave neutralization is the chemical process that stops the action of the waving solution and rebuilds the broken disulfide bonds into their new curly shape. The active ingredient in most perm neutralizers is hydrogen peroxide (an oxidizing agent), typically at a concentration of 1% to 2% (5 to 10 volume), with a pH range of 2.5 to 4.5.

During neutralization:

The reducing solution must be thoroughly rinsed from the hair with warm water for at least 5 minutes and then blotted dry with towels to prevent dilution of the neutralizer.

The neutralizer is applied, supplying oxygen atoms that react with the hydrogen atoms added during the reduction phase.

The oxygen removes the hydrogen atoms, forming water, and forces the sulfur atoms back together, reforming the disulfide bonds in their new curled positions.

In accordance with Florida cosmetology board standards, all tools must be sanitized immediately, and chemical waste must be disposed of in closed trash receptacles to maintain salon safety.