Study guide

27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls

Florida HVAC Contractor License Class A/B

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility

2 Establishing the Contracting Business

2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding

3 Insurance for Florida HVAC Contractors

3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules

4 Overhead, Staffing & Markets

4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services

5 Bids, Proposals & Estimating

5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing

6 Purchasing, Invoices, Draws & Safety Programs

6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)

7 Managing Contracts

7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk

8 Managing Trade Operations

8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory

9 Accounting I: Receivables, Payables & Cash

9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios

10 Accounting II: Taxes, Job Cost & Payroll

10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments

11 Managing Human Resources

11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees

12 Florida Contractor Law: Chapter 489 & 61G4

12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities

13 Florida Construction Lien Law (Chapter 713)

13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien

14 Financial Responsibility, CE & Federal Rules

14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules

15 Plans, Specs & Equipment Selection

15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness

16 Energy Codes, Loads & Thermal Resistance

16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves

17 HVAC System & Duct Design

17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes

18 Piping, Pumps, Boilers, Controls & Rigging Design

18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment

19 Sheet Metal Duct Fabrication

19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans

20 Split, Package & Heat Pump Installation

20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems

21 Large Systems, Chillers & Towers

21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems

22 Refrigeration, Coolers, Ventilation & Controls Install

22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests

23 Condensers, Compressors & Air Handlers

23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips

24 Duct, Fans, Filters & Terminals

24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances

25 Refrigerant Piping & Joining

25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing

26 Metering Devices & Line Components

26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories

27 Controls Installation

27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches

28 Motors, Wiring & Electrical Installation

28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe

29 Diagnostic Analysis: Refrigeration

29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments

30 Diagnostic Analysis: Electrical & Instruments

30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges

31 Recovery, Repair & Calibration

31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls

32 Mechanical Service & Cleaning

32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains

33 Jobsite Safety & Equipment

33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors

34 Energy Management

34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs

35 Indoor Air Quality

35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects

27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls

Key Takeaways Explain This Topic AI

Low-voltage HVAC control wiring is inside both Class A and Class B scope (F.S. 489.105(3)(f) and (g)). Pneumatic control piping is Class A only; Class B still owes 3–15 psig theory but does not bid pneumatic mains as Class B work.

FBC Energy Conservation 2023 R403.1.1: at least one thermostat per separate heating and cooling system, on an interior wall sensing representative air — not on a supply chase or an uninsulated west wall.

Pneumatic main air is about 18–25 psig; the analog branch signal is 3–15 psig (3 psi one end of travel, 15 psi the other, 9 psi mid-scale). Plenum pneumatic tubing must be UL 1820 listed (FBC Mechanical 602.2.1.3).

Solid-state HVAC controls use thermistors, electronic boards, and SCRs; they are still low-voltage HVAC controls for license scope. Do not megger through a board. Solder electrical connections with rosin-core flux only — never acid-core plumbing solder.

Electric humidistats make on humidity rise for dehumidification (Florida’s usual case) or on drop for humidification. A humidistat is not a substitute for a freeze stat or a dual pressure control.

Last updated: August 2026

27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls

The next Trade D cluster is the operating hardware: thermostats , humidistats (including electric humidistats ), pneumatic controls, solid-state controls, and soldering electrical connections . Chapter 22.4 already installed pneumatic piping as a Trade C Class A item and DDC as low-voltage. This section is the devices : subbases, humidistat setpoints, 3–15 psi actuators, electronic boards, and whether a solder joint is even legal on a control lead. F.S. 489.105 decides who may pull the wire or the air tube. FBC Energy Conservation 2023 R403.1.1 decides where the thermostat sits.

Quick Answer: Thermostats and humidistats are operating controls on low-voltage HVAC wiring — Class A and Class B . Pneumatic control piping is Class A only ( 18–25 psig main, 3–15 psig branch, UL 1820 in plenums). Solid-state boards are still HVAC controls, not a license to megger through silicon. Rosin-core solder only; never acid-core .

Thermostats — location, subbase, and what the terminals actually do

A thermostat is an operating temperature control. Older units used a bellows or bimetal and a mercury or snap switch; current units are electronic (solid-state) with a thermistor. The license does not care which decade the cover is from. It cares that the device matches the system and sits where R403.1.1 wants it: at least one thermostat for each separate heating and cooling system , interior wall, representative air. A stat on a supply chase , over a return , on an uninsulated west wall in a Florida afternoon, or in a kitchen exhaust plume is an install defect, not a ‘customer preference’ the inspector has to swallow.

Heat/cool subbases bring R (24-volt hot from the transformer), C (common — required by most electronic stats and communicating equipment), Y (compressor / cooling), G (fan), W (heat). Heat-pump subbases add O or B (reversing valve — O energized in cooling on most brands, B in heating on some), W2 / E (auxiliary / emergency heat), and often an emergency-heat switch that locks out the compressor . Landing a cool-only stat on a heat pump, or landing O when the outdoor unit wants B , is the Section 20.2 failure all over again. Multistage stats add Y2 / W2 . Locking covers and occupancy setback are energy-code and spec items, not optional trim.

A heat anticipator on a mechanical heating stat is a small resistor that warms the bimetal so the burner shuts off before the room overshoots. Set it to the measured current in the heating circuit (typically in the 0.2–1.2 A range on 24-volt gas valves). A cooling anticipator is usually fixed . Electronic stats fake anticipation in software. Do not ‘turn the anticipator up’ to hide an oversized furnace.

Low-voltage HVAC control wiring is expressly inside both Class A and Class B (F.S. 489.105(3)(f) and (g) ). That is thermostat cable , humidistat leads, condensate float switches, damper actuators, and communicating buses that are still HVAC control. It is not a new 277/480-volt feeder and not lighting. Keep 24-volt pairs away from line-voltage in the same unlisted bundle so induced voltage does not chatter contactors. Class 2 transformers (Section 27.3) feed this layer.

Electric humidistats — Florida moisture, not desert humidifiers

An electric humidistat is an RH-sensing switch or analog sensor. Make-on-drop starts a humidifier when air is too dry. Make-on-rise starts a dehumidifier , reheat , or a dehumidify-overcool sequence when air is too wet. Florida’s comfort problem is almost always the second one. A Panhandle winter classroom or a dedicated outdoor-air unit may still humidify; a Miami storefront that only humidifies is solving the wrong season.

Mount the humidistat in representative room air or in a return that actually mixes the zone — not in a supply boot, not in a locker-room shower plume, not on the leaving face of a 45°F coil (that air is already saturated and will lie). Combination thermo-humidistats still do not replace freeze stats, HP/LP, or oil failure . Humidity is operating ; those others are safety .

Typical indoor targets taught with this hardware sit around 40–60 percent RH , with Florida mold risk climbing as indoor surfaces sit below dew point. The exam wants the action (rise vs drop) and the location , not a medical RH prescription.

Pneumatic controls — air as analog, Class A piping

Pneumatic controls use compressed air instead of 24-volt wires to move damper motors and valves. A control compressor, dryer, and filter feed a main at about 18–25 psig . The branch (signal) to the actuator is the analog 3–15 psig span: 3 psi is one end of travel, 15 psi the other, 9 psi is mid-scale. Direct-acting controllers increase branch pressure as the sensed variable rises . Reverse-acting controllers decrease it. Normally-open and normally-closed actuator springs choose the fail position on loss of air — outdoor-air and smoke dampers fail to a life-safety position, not to whichever spring was in the truck.

One-pipe thermostats bleed main air through a restrictor; two-pipe stats have a separate branch. Receiver-controllers , PE (pressure-electric) switches , and EP (electric-pneumatic) transducers are how pneumatics talk to electric starters. Calibration is Chapter 31. Install is clean, dry, oil-free air, leak-tight tubing, and the correct fail spring.

F.S. 489.105(3)(f) lists pneumatic control piping in Class A . 489.105(3)(g) (Class B) does not . Class B candidates still owe the 3–15 psi span and direct-versus-reverse theory; they do not bid a pneumatic remodel as Class B. FBC Mechanical 602.2.1.3 : combustible pneumatic tubing exposed in a plenum shall be listed to UL 1820 (peak optical density not greater than 0.50, average not greater than 0.15, flame spread distance not greater than 5 feet ). Vinyl tubing that is not plenum-rated does not belong above a corridor ceiling used as a return plenum.

Air-pressure switches in this same family prove fan flow or filter dirty (a rise in pressure drop). They are not refrigerant HP/LP bellows. A sail switch is the older cousin. On a makeup-air or kitchen-exhaust interlock, loss of proven airflow must stop the equipment the sequence says to stop — usually the cooking appliance or makeup fan , not the grease exhaust that NFPA 96 wants running during a fire.

Solid-state controls and soldering electrical connections

Solid-state HVAC controls replace moving contacts in the sensor and logic with thermistors, diodes, SCRs, triacs, and microprocessor boards . Defrost boards, furnace ignition modules, heat-pump outdoor boards, electronic fan controls, and DDC controllers are all solid-state. They still live on low-voltage HVAC control wiring for F.S. 489.105. They do not enjoy a special license to rewire a building. Do not megger through an electronic board; isolate the board or you punch a $400 hole in a $40 insulation test. Electrostatic discharge care is real around ignition modules. A ‘clicking’ relay is not a diagnosis of a failed thermistor; measure the sensor against the manufacturer’s ohm-versus-temperature chart.

Soldering electrical connections on this outline means joining control or pigtail conductors with solder where the listing still allows it. Use rosin-core (electrical) flux. Never acid-core plumbing solder — residual acid eats the copper and the joint fails green weeks later. Heat the joint , not the solder roll; tin both surfaces; support the conductors so solder is not the strain relief. Many current listings prefer listed crimps, wire connectors, or manufacturer plugs over field solder. A soldered 24-volt joint that is acid-cored is still a wrong joint even if it ‘rang out’ on Friday.

  • Device Signal License note Exam trap
  • 24-V heat/cool stat R, C, Y, G, W Class A and B low-voltage Stat on a west wall or supply chase
  • Heat-pump stat Adds O/B, E / W2 Same O landed when the unit wants B
  • Electric humidistat RH rise or drop Same Using it as the only safety

Pneumatic stat / receiver-controller 3–15 psi branch on 18–25 psi main Piping = Class A only Vinyl tubing in a return plenum

  • PE / EP Air to electric or electric to air Class A air piping; electric per 489.105 Calling PE a dual HP/LP
  • Solid-state board Thermistor in, relay or SCR out Low-voltage HVAC, both classes Meggering through the board
  • Soldered electrical joint Rosin-core only Mechanical support required Acid-core ‘because it is copper’
  • Florida HVAC scenario

A certified Class B shop in Orange County replaces a failed 4-ton heat pump in a Climate Zone 2A house. The helper hangs a cool-only thermostat on the uninsulated west wall of the Florida room, skips C because ‘the old mercury stat did not have it,’ and solders the Y pigtail with leftover acid-core plumbing solder. Independently, the owner’s office next door still has a 1970s pneumatic air handler. Class B may land the electronic heat-pump stat (once it is the right subbase, on an interior wall, with O/B correct, C present, and rosin-core or a listed connector). Class B may not run new pneumatic control piping to that office air handler — that piping is Class A under 489.105(3)(f), and plenum tubing still needs UL 1820 . The Class B candidate still has to read a 3–15 psi branch and a direct-acting receiver-controller on the exam.

Traps: (1) Cool-only stat on a heat pump. (2) Thermostat on a supply chase. (3) Class B bidding pneumatic mains. (4) Non-plenum tubing in a return plenum. (5) Acid-core solder on electrical leads. (6) Meggering a solid-state board in circuit. (7) Treating a humidistat as a freeze stat.