Study guide
6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
Florida HVAC Contractor License Class A/B
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility
2 Establishing the Contracting Business
2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding
3 Insurance for Florida HVAC Contractors
3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules
4 Overhead, Staffing & Markets
4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services
5 Bids, Proposals & Estimating
5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing
6 Purchasing, Invoices, Draws & Safety Programs
6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
7 Managing Contracts
7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk
8 Managing Trade Operations
8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory
9 Accounting I: Receivables, Payables & Cash
9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios
10 Accounting II: Taxes, Job Cost & Payroll
10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments
11 Managing Human Resources
11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees
12 Florida Contractor Law: Chapter 489 & 61G4
12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities
13 Florida Construction Lien Law (Chapter 713)
13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien
14 Financial Responsibility, CE & Federal Rules
14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules
15 Plans, Specs & Equipment Selection
15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness
16 Energy Codes, Loads & Thermal Resistance
16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves
17 HVAC System & Duct Design
17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes
18 Piping, Pumps, Boilers, Controls & Rigging Design
18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment
19 Sheet Metal Duct Fabrication
19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans
20 Split, Package & Heat Pump Installation
20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems
21 Large Systems, Chillers & Towers
21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems
22 Refrigeration, Coolers, Ventilation & Controls Install
22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests
23 Condensers, Compressors & Air Handlers
23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips
24 Duct, Fans, Filters & Terminals
24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances
25 Refrigerant Piping & Joining
25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
26 Metering Devices & Line Components
26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories
27 Controls Installation
27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches
28 Motors, Wiring & Electrical Installation
28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe
29 Diagnostic Analysis: Refrigeration
29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments
30 Diagnostic Analysis: Electrical & Instruments
30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges
31 Recovery, Repair & Calibration
31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls
32 Mechanical Service & Cleaning
32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains
33 Jobsite Safety & Equipment
33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors
34 Energy Management
34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs
35 Indoor Air Quality
35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects
6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
Key Takeaways Explain This Topic AI
The 2026 Air Conditioning A CBT reference list uses OSHA 29 CFR 1926, July 1, 2025 edition; construction fall protection generally triggers at 6 feet (1926.501), and HVAC shops still owe a written, enforced safety program on every site.
OSHA's construction Hazard Communication rule, 29 CFR 1926.59, is identical to 1910.1200: Safety Data Sheets in the 16-section GHS format replaced MSDSs, and employees must have access to the SDS, labels, and training.
A Florida Drug-Free Workplace program under F.S. 440.102 can qualify the employer for a 5% workers' compensation premium credit (F.S. 627.0915) when the carrier verifies compliance.
F.S. 440.102(15) requires Chapter 489 construction contractors who perform specified state construction contracts (educational facilities under Ch. 1013, public property under Ch. 255, or state correctional facilities under Ch. 944) to implement a drug-free workplace program.
For the 440.102 credit, job-applicant, reasonable-suspicion, routine fitness-for-duty, and follow-up testing are program testing types; random testing is permitted if the written policy includes it and it is applied consistently, not a substitute for a missing written program.
Last updated: August 2026
6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
B&F Area B item 7 is develop a safety program : drug-testing regulations , SDS/MSDS sheets , and OSHA regulations . Trade Area G will later test PPE, lockout/tagout, ladders, scaffolds, rigging, and excavation in equipment-level detail. This section is the administrative program the qualifier must put in writing, train, fund, and enforce — the same qualifier who is jointly responsible for field work under F.S. 489.1195. The 2026 Air Conditioning A CBT list cites OSHA 29 CFR 1926, July 1, 2025 . Use that edition on the trade sitting. B&F still expects you to know that construction in Florida is a 1926 world, that Hazard Communication for construction is 1926.59 , and that Florida's Drug-Free Workplace statute is F.S. 440.102 .
CILB continuing education under F.S. 489.115(4)(b) already forces at least 1 hour of workplace safety each biennium. That hour is not the program. The program is what a new helper receives before climbing a 12-foot ladder to a package unit, what a host general contractor asks for at the preconstruction meeting, and what OSHA asks for after a fall.
Building the OSHA construction safety program
A usable HVAC safety program is not a binder copied from a website. It is a written set of site and shop rules that match the work you actually do: rooftop fall hazards, electrical disconnects, refrigerant and nitrogen cylinders, brazing and hot work, coil cleaners and solvents, fiberglass duct lining, attic heat, scissor lifts, and crane day for a 20-ton unit. Core pieces the exam and OSHA both recognize:
Management commitment and a named competent person. Construction standards repeatedly require a competent person — capable of identifying hazards and with authority to correct them. A helper with a safety vest and no authority is not that person.
Hazard assessment and site-specific planning. A residential attic changeout and a hospital chiller replacement do not share the same Job Hazard Analysis. Class A work on boilers, unfired pressure vessels, and pneumatic control piping (outside Class B scope) adds pressure-vessel and control-air hazards the Class B shop may not see; Class B candidates still need the theory because the B&F safety questions are not split by tonnage.
OSHA 1926 controls that HVAC actually hits. Fall protection in construction generally starts at 6 feet ( 1926.501 ). Ladders are 1926.1053 ; scaffolds are Subpart L. Personal protective equipment is Subpart E. Electrical lockout/tagout concepts appear at 1926.417 (and general-industry 1910.147 is how many shops write the energy-control procedure for the bench). Excavation (Subpart P) appears when you bury a ground loop or a condensate line in a trench: cave-in protection is the 5-foot trigger in the construction standard, with ladder access at 4 feet . Cranes and rigging (Subpart CC) own the day a condenser flies over a parapet.
Training, inspections, and discipline. A rule that is not trained and not enforced is not a program. Document toolbox talks, equipment inspections, and what happens on the second violation.
OSHA recordkeeping (29 CFR 1904). Employers that are not in an exempt small-employer or low-hazard category maintain the OSHA 300 log, 301 incident reports, and the 300A annual summary. The 300A is posted February 1 through April 30 . Severe-injury reporting (fatality, inpatient hospitalization, amputation, loss of an eye) is a separate, short-deadline duty. Do not invent the employee-count cutoff if the item stem does not give it; know that logs exist and that a “we just do residential” story does not erase a recordable laceration from a sheet-metal edge.
Multi-employer worksites are the Florida HVAC default. You are almost always a sub on someone else's site. OSHA can cite the exposing, creating, correcting, or controlling employer. Your program must tell techs what to do when the GC's roof opening is unguarded, and it must tell the GC how to reach your SDS for the coil cleaner you brought.
Hazard Communication, SDS, and the old MSDS
29 CFR 1926.59 states that construction Hazard Communication requirements are identical to 29 CFR 1910.1200 . That is the Hazard Communication Standard (HCS) . Chemical manufacturers and importers classify hazards and send Safety Data Sheets (SDS) downstream. Employers who use the chemicals — every HVAC shop with refrigerant, acetylene, nitrogen, brazing flux, PVC cement, solvents, biocides, and acid coil cleaner — must:
Keep a written HazCom program .
Maintain an inventory of hazardous chemicals.
Ensure labels (product identifier, signal word, pictograms, hazard statements, precautionary statements, supplier) stay on incoming containers and that workplace containers are labeled or covered by a written alternative that employees understand.
Keep SDS for each hazardous chemical and make them readily accessible during each work shift — on the truck and on the roof, not only in a locked office.
Train employees before exposure and when a new hazard appears.
On multi-employer sites, tell other employers how to get your SDS, what precautions to take, and how your in-house labeling works.
MSDS (Material Safety Data Sheet) is the pre-GHS name. After OSHA aligned with the UN Globally Harmonized System (GHS) , the required document is an SDS in a 16-section format. Exam stems still say “SDS/MSDS” because older Contractors Manual language and shop habit linger. The correct current document is the SDS. If a vendor still hands you a six-section MSDS, you do not have a compliant sheet for that product.
OSHA enforces the occupational content of the SDS (identity, hazards, composition, first aid, fire, spill, handling, exposure controls, physical properties, stability, toxicology, and other information). Sections 12–15 (ecological, disposal, transport, regulatory) appear for GHS completeness; OSHA does not enforce those four sections because other agencies own them. Section 16 is other information, including revision date.
- SDS section Title HVAC use
- 1 Identification Product name, refrigerant ASHRAE number, supplier emergency phone
- 2 Hazard identification Signal word, pictograms, flammability or toxicity of coil cleaner or acetylene
- 3 Composition Hazardous ingredients; blends
- 4 First-aid measures Frostbite from liquid refrigerant, chemical burns from acid cleaner
- 5 Fire-fighting measures Cylinder fire, oil-laden refrigerant
- 6 Accidental release measures Ventilation, ignition sources, spill kit
- 7 Handling and storage Cylinder upright, heat, incompatible chemicals
- 8 Exposure controls / PPE Goggles, gloves, respirator if the sheet requires it
- 9–11 Physical properties, stability, toxicology Pressure, boiling point, decomposition, health effects
- 12–15 Ecological, disposal, transport, regulatory Present on the sheet; OSHA does not enforce these four
- 16 Other information Date of last revision
A refrigerant cylinder without an SDS in the truck is a HazCom failure even if the tech “already knows R-410A is high pressure.” Brazing flux, leak-detector fluid, and the solvent used to wipe PVC are the chemicals that actually injure people, and they are the ones missing from many HVAC trucks.
Florida drug testing and the Drug-Free Workplace program
Florida does not make every private HVAC shop drug-test every employee. What Florida does do is create a statutory Drug-Free Workplace program in F.S. 440.101–440.102 . If the employer implements the program as the statute and Rule 59A-24, F.A.C. (collection and laboratory standards) require, two things follow:
Workers' compensation premium credit. F.S. 627.0915 and the Division of Workers' Compensation's employer FAQ describe a 5% premium credit once the carrier verifies a compliant program. That 5% sits next to the CILB insurance minimums you already carry ($100,000 public liability and $25,000 property damage for air-conditioning contractors under 61G4-15.003 , plus Chapter 440 workers' compensation or a valid exemption). It is not automatic because you bought a cup of urine cups.
Testing and claim consequences. A compliant program lets the employer use a refusal or a confirmed positive in the ways 440.102 allows, including for job applicants, and it interacts with Chapter 440's intoxication defenses. Chain of custody, a Medical Review Officer (MRO) for confirmed lab results, confidentiality, and a written policy given to employees are not optional decorations. They are how the 5% survives an audit.
F.S. 440.102 testing types the program is built around include job-applicant testing (an employer in the program must require applicants to submit to a drug test), reasonable-suspicion testing (documented, contemporaneous observations — not a hunch after a punch-list argument), routine fitness-for-duty testing, and follow-up testing after a violation or completion of a rehabilitation program. Random testing is permitted if the written policy includes it and it is applied even-handedly; it is not a required substitute for the other categories. Supervisors who will call reasonable suspicion need training. Sending a tech for a “random” test because the GC complained about slow duct hanging, with no policy and no documentation, is how you lose both the credit and an unemployment or discrimination fight.
F.S. 440.102(15) is the state-contract hammer. Each construction contractor regulated under Part I of Chapter 489 — that includes Division II air-conditioning contractors, not only general contractors — who contracts to perform construction work under a state contract for educational facilities (Chapter 1013) , public property or publicly owned buildings (Chapter 255) , or state correctional facilities (Chapter 944) shall implement a drug-free workplace program under 440.102. Electrical and alarm contractors under Part II of 489 are named in the same subsection. A Class A firm chasing a university chiller replacement cannot treat 440.102 as a workers' comp shopping coupon. On that state job it is a contracting requirement . Federal contracts can add the separate federal Drug-Free Workplace Act duties; do not conflate the federal clause with Florida's 5% credit.
Florida HVAC scenario
A certified Class A company wins a Chapter 255 state-office rooftop replacement in Tallahassee, contract price $410,000. The QA copies a 2010 “MSDS binder” that still titles every sheet Material Safety Data Sheet, leaves it in the shop, and tells the crew the GC's program covers them. A tech takes an unlabeled spray bottle of acid coil cleaner to the roof, gets product in the eyes, and there is no SDS Section 4 first-aid sheet on site. The same tech had never been drug-tested; the company has no 440.102 policy. The carrier is charging full workers' compensation premium. OSHA's construction inspection will look at 1926 fall protection on the roof, 1926.59 HazCom (no accessible 16-section SDS, no written program, no training, unlabeled container), and recordkeeping if the injury is recordable. DBPR will look at whether the qualifier supervised field work. The state contract itself required a 440.102 program under subsection (15). The 5% workers' comp credit is the smaller miss. The unlabeled acid and the missing SDS are the ones that burn a worker and fail the exam item that asked how a contractor develops a safety program — written HazCom with SDS access, trained competent persons, 1926 controls for the actual roof, and a Florida drug-testing program that is mandatory on that Chapter 255 job and documented with chain of custody, not a dusty MSDS binder in the shop.