Study guide
25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
Florida HVAC Contractor License Class A/B
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility
2 Establishing the Contracting Business
2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding
3 Insurance for Florida HVAC Contractors
3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules
4 Overhead, Staffing & Markets
4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services
5 Bids, Proposals & Estimating
5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing
6 Purchasing, Invoices, Draws & Safety Programs
6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
7 Managing Contracts
7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk
8 Managing Trade Operations
8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory
9 Accounting I: Receivables, Payables & Cash
9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios
10 Accounting II: Taxes, Job Cost & Payroll
10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments
11 Managing Human Resources
11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees
12 Florida Contractor Law: Chapter 489 & 61G4
12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities
13 Florida Construction Lien Law (Chapter 713)
13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien
14 Financial Responsibility, CE & Federal Rules
14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules
15 Plans, Specs & Equipment Selection
15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness
16 Energy Codes, Loads & Thermal Resistance
16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves
17 HVAC System & Duct Design
17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes
18 Piping, Pumps, Boilers, Controls & Rigging Design
18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment
19 Sheet Metal Duct Fabrication
19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans
20 Split, Package & Heat Pump Installation
20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems
21 Large Systems, Chillers & Towers
21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems
22 Refrigeration, Coolers, Ventilation & Controls Install
22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests
23 Condensers, Compressors & Air Handlers
23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips
24 Duct, Fans, Filters & Terminals
24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances
25 Refrigerant Piping & Joining
25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
26 Metering Devices & Line Components
26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories
27 Controls Installation
27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches
28 Motors, Wiring & Electrical Installation
28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe
29 Diagnostic Analysis: Refrigeration
29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments
30 Diagnostic Analysis: Electrical & Instruments
30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges
31 Recovery, Repair & Calibration
31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls
32 Mechanical Service & Cleaning
32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains
33 Jobsite Safety & Equipment
33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors
34 Energy Management
34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs
35 Indoor Air Quality
35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects
25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
Key Takeaways Explain This Topic AI
FBC Mechanical Table 305.4: copper or copper-alloy tubing 8 feet maximum horizontal, 10 feet vertical; copper pipe 12 / 10; steel pipe 12 / 15; steel tubing 8 / 10; PVC 4 / 10. Hangers attach to the structure (305.3), not to duct.
Section 305.5: piping other than cast-iron or steel through studs or joists within 1-1/2 inches of the nearest edge gets 16-gage shield plates extending 2 inches above sole plates and below top plates.
FBC Mechanical 1110.3: pressure-test with oxygen-free nitrogen, helium, or argon — never oxygen, air, or combustible gas. Systems with tubing not over 5/8 inch OD may use the nameplate refrigerant as the test medium.
Section 1110.5: hold not less than the lower of design pressure or relief setting for at least 60 minutes with no pressure loss and no added gas; then achieve 500 microns and, after isolating the pump, stay at or below 1,500 microns for at least 10 minutes.
Field joints stay exposed until tested (1110.2). Systems with 55 pounds or more of refrigerant need a signed contractor or registered design professional test certificate (1110.8).
Last updated: August 2026
25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
The last Trade D cluster in this chapter is horizontally supported piping (outline items 13–14) and the field test that proves the joints from 25.2–25.3. A correctly sized, nitrogen-brazed, Schedule-right pipe still fails if it sags into a belly that ponds oil, if a hanger crushes the suction insulation into a condensate drip, or if someone “tests” the circuit with oxygen . Open FBC Mechanical 2023 Sections 305 and 1110 , and keep the Pipefitters Handbook hanger tables in the same stack as Table 305.4 when the spec points at MSS SP-58 .
Quick Answer: Support copper tubing at 8 feet horizontal and 10 feet vertical ( Table 305.4 ). Steel pipe is 12 / 15 . Hang from the structure , protect copper within 1½ inches of a stud edge with 16-gage shields ( 305.5 ). Pressure-test with oxygen-free nitrogen (never oxygen) for ≥60 minutes at design or relief pressure with no loss , then pull 500 microns and hold ≤1,500 microns for 10 minutes ( 1110.3 / 1110.5 ).
Horizontally supported piping — Table 305.4
FBC Mechanical 305.1–305.4 : mechanical piping shall be supported; hangers shall take the static and specified dynamic load; materials in contact with the pipe shall be compatible (no bare steel strap eating copper); hangers and anchors attach to the building construction in an approved manner ( 305.3 ). Spacing shall not exceed Table 305.4 or ANSI/MSS SP-58 .
FBC Mechanical 2023, following the 2021 IMC table that the 8th Edition adopted, uses a single copper-tubing row of 8 feet horizontal and 10 feet vertical — not the older plumbing split of 6 feet under 1-1/4 inch and 10 feet at 1-1/2 inch. Copper or copper-alloy pipe (iron-pipe-size, not ACR tube) is 12 feet horizontal, 10 feet vertical. Steel pipe is 12 / 15 . Steel tubing is 8 / 10 . PVC is 4 / 10 . PEX 1 inch and smaller is 32 inches horizontal.
That 8-foot copper-tubing number is the horizontally-supported-piping exam answer for a 7/8-inch ACR suction. Hanging 7/8-inch every 16 feet because “it doesn’t weigh much” is a belly, an oil trap you did not design, and a failed 305.4 row. Over-2-inch hard-drawn ACR is still tubing on that 8-foot row unless you are actually on copper pipe (IPS) at 12 feet.
Vertical copper tubing is 10 feet between supports, with mid-story guides where Table 305.4 note c applies to the plastic rows. 1109.6 still wants the pipe free of excess stress, vibration, expansion, and settlement . A rigid clamp on both sides of a long hot-gas run with no expansion loop is how a braze cracks in August.
- Material (Table 305.4) Max horizontal (ft) Max vertical (ft)
- Copper or copper-alloy tubing (ACR) 8 10
- Copper or copper-alloy pipe 12 10
- Steel pipe 12 15
- Steel tubing 8 10
- PVC pipe (condensate, not refrigerant) 4 10
Do not hang refrigerant pipe from duct, sprinkler mains, or electrical conduit. The structure is the attachment ( 305.3 ). Use clevis , split-ring, or strut clamps sized for the OD plus insulation . Saddles or listed insulation supports keep the hanger from crushing elastomeric suction insulation — a crushed jacket is a Florida attic condensate stain and a 1109.7 miss. Isolate vibration near the compressor; 1109.8.3 still forbids using 1-inch-OD and larger copper as the support for a stop valve.
305.5 Protection against physical damage. In concealed locations, piping other than cast-iron or steel that passes through holes or notches in studs, joists, rafters, or similar members less than 1-1/2 inches from the nearest edge shall be protected by shield plates. Plates are 0.0575 inch (No. 16 gage) steel, covering the notched/bored area and extending not less than 2 inches above sole plates and below top plates. ACR in a 2×4 stud bay set 1 inch from the face is a drywall-screw leak without that plate. Steel pipe is exempted from that 305.5 plate rule; copper is not.
1109.2.2 still wants refrigerant piping inside building elements or a protective enclosure , with exceptions for pipe more than 7 feet 3 inches up, within 6 feet of the appliance, in a 1105 machinery room, or outdoors when protected from weather and traffic. Underground refrigerant pipe is at least 8 inches below grade and protected against corrosion (exception 4.3 under 1109.2.2). 1109.2.4 : pipe in concrete floors is encased in pipe, conduit, or duct.
Pressure testing — nitrogen, never oxygen
FBC Mechanical 1110.1 : field-erected refrigerant piping (other than ammonia/IIAR) shall be pressure-tested for strength and leak-tested for tightness after installation and before operation , high side and low side. Listed factory equipment (compressors, coils, driers as shipped) is not re-bombed as a condition of 1110.1, but the field pipe is.
1110.2 : field pipe and joints shall be exposed for visual inspection and testing before being covered or enclosed. Insulate and sheetrock after the test, not before.
1110.3 Test gases. Use oxygen-free nitrogen, helium, or argon . R-744 systems may use carbon dioxide; R-718 may use water. Oxygen, air, combustible gases, and mixtures containing such gases shall not be used. Exception: systems erected with tubing not exceeding 5/8 inch OD may use the nameplate refrigerant as the test medium. That exception is a small-bore courtesy, not a license to skip nitrogen on a 7/8-inch suction.
Why not oxygen or air. Oxygen plus oil is an explosion. Compressed air carries moisture and, in an oily pipe, the same fire problem. The cutting-torch oxygen hose is the classic fatal shortcut.
1110.4 : the pressurizing rig needs a test gauge on the outlet side and a pressure-limiting or pressure-reducing device. Gauge accuracy ±3 percent of test pressure; resolution 5 percent or less of test pressure. A 0–100 psi grocery gauge on a 600-psi R-410A high side is not 1110.4.
1110.5 — sixty minutes, then 500 microns
1110.5 requires both of the following:
Pressurize for not less than 60 minutes to not less than the lower of the design pressures or the pressure-relief setting . Design pressure is the nameplate on the condensing unit, compressor, vessel, or other labeled component. Do not add gas after the test starts. The gauge shall show no loss . If you are in the small-bore refrigerant-as-medium exception, the test pressure shall be at least the saturation dew-point pressure at 77°F .
Achieve a vacuum of 500 microns . Isolate the pump. The system shall not rise above 1,500 microns for not less than 10 minutes .
That 500-micron / 1,500-micron / 10-minute standing-vacuum test is in FBC Mechanical 2023 Section 1110.5 (8th Edition, 2021 IMC text) — not merely shop folklore. Industry practice and the code sentence are the same number on this edition. A pump that “sounds quiet” at 2,500 microns has not met 1110.5. Temperature rise and refrigerant still in the oil can fake a micron bounce; the 10-minute isolated hold is how you tell a leak from a wet system.
1110.5.1 : joints and refrigerant-containing parts in an air duct that serves occupied space are tested at 150 percent of the higher of design pressure or relief setting. 1110.5.2 : limited-charge systems with a relief device, erected on site, test at not less than 1.5 times the relief setting (listed limited-charge equipment tests at design pressure).
1110.7 : centrifugal / nonpositive-displacement compressor systems are treated as all low-side for test purposes. 1110.8 : the installing contractor or registered design professional issues a certificate of test for systems containing 55 pounds or more of refrigerant — test date, refrigerant, test medium, high-side and low-side field test pressures — signed and made a public record.
Worked test sequence. A Class B 4-ton R-410A change-out in Lee County: joints still exposed, compressor service valves front-seated so you are not bombing the factory compressor to a field number it was already listed at, nitrogen through a regulator and relief , high-side nameplate design (read the outdoor unit — often in the 600 psi neighborhood on R-410A), 60 minutes with a logged gauge and no makeup nitrogen , repair any loss, bleed to 1–2 psig so air does not rush in, then a two-stage vacuum pump and a micron gauge on the system , not on the pump. Hit 500 microns , valve off, 10 minutes ≤1,500 . Then weigh in the charge. EPA 608 still governs who buys the refrigerant; the CILB card is not a 608 card.
Florida HVAC scenario
Gulfshore Comfort, Class B in Lee County, hangs a 3/8-and-7/8 line set across a 24-foot attic on two hangers (12-foot spacing) using a steel wire that bites through the insulation, skips the 16-gage plate where the 7/8-inch passes 1 inch from the edge of a ceiling joist, pressure-tests with the oxygen hose “to save a nitrogen bottle,” and calls the vacuum done when the pump note changes, with no micron gauge. Independent failures: Table 305.4 8-foot copper-tubing spacing, crushed insulation / 1109.7 , 305.5 shield , 1110.3 oxygen ban , and 1110.5 500 / 1,500 micron hold. Class B is legal on 3 tons. None of those misses become legal because the system is small. A Class A 55-pound rack on the same campus still needs the 1110.8 certificate on top of the same nitrogen test.
Traps: (1) 16-foot hanger spacing on ACR. (2) Hanging from duct. (3) Oxygen or air as the test gas. (4) Adding nitrogen during the 60-minute hold to “keep the gauge up.” (5) Covering joints before 1110.2 inspection.