Study guide
22.2 Walk-In & Reach-In Coolers
Florida HVAC Contractor License Class A/B
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility
2 Establishing the Contracting Business
2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding
3 Insurance for Florida HVAC Contractors
3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules
4 Overhead, Staffing & Markets
4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services
5 Bids, Proposals & Estimating
5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing
6 Purchasing, Invoices, Draws & Safety Programs
6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)
7 Managing Contracts
7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk
8 Managing Trade Operations
8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory
9 Accounting I: Receivables, Payables & Cash
9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios
10 Accounting II: Taxes, Job Cost & Payroll
10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments
11 Managing Human Resources
11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees
12 Florida Contractor Law: Chapter 489 & 61G4
12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities
13 Florida Construction Lien Law (Chapter 713)
13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien
14 Financial Responsibility, CE & Federal Rules
14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules
15 Plans, Specs & Equipment Selection
15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness
16 Energy Codes, Loads & Thermal Resistance
16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves
17 HVAC System & Duct Design
17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes
18 Piping, Pumps, Boilers, Controls & Rigging Design
18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment
19 Sheet Metal Duct Fabrication
19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans
20 Split, Package & Heat Pump Installation
20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems
21 Large Systems, Chillers & Towers
21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems
22 Refrigeration, Coolers, Ventilation & Controls Install
22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests
23 Condensers, Compressors & Air Handlers
23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips
24 Duct, Fans, Filters & Terminals
24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances
25 Refrigerant Piping & Joining
25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing
26 Metering Devices & Line Components
26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories
27 Controls Installation
27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches
28 Motors, Wiring & Electrical Installation
28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe
29 Diagnostic Analysis: Refrigeration
29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments
30 Diagnostic Analysis: Electrical & Instruments
30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges
31 Recovery, Repair & Calibration
31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls
32 Mechanical Service & Cleaning
32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains
33 Jobsite Safety & Equipment
33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors
34 Energy Management
34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs
35 Indoor Air Quality
35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects
22.2 Walk-In & Reach-In Coolers
Key Takeaways Explain This Topic AI
A walk-in is a personnel-entry insulated box with a remote or packaged condensing unit and one or more unit-cooler evaporators; a reach-in is a cabinet the operator does not walk into, often self-contained.
Medium-temperature coils (box above freezing) may use off-cycle or air defrost; low-temperature coils need electric or hot-gas defrost, a heated drain line, and time-initiated, temperature- or time-terminated control.
Externally equalized TXVs feed evaporators that have a distributor or a large pressure drop; set superheat from suction-line temperature minus saturated suction temperature at the bulb, not from a box thermostat.
Suction piping needs a P-trap at a unit cooler hung above the condensing unit, slope toward the compressor, and a double suction riser when part-load velocity will not carry oil up a single riser.
A liquid-line solenoid and pump-down on the low-pressure control protect the compressor at shutdown; an EPR holds a higher suction at a warmer coil on a shared-suction rack.
Last updated: August 2026
22.2 Walk-In & Reach-In Coolers
Trade C’s cooler cluster is the box , not the rooftop. The outline wants walk-in and reach-in installation: evaporators , TXVs , defrost , piping , and controls . Refrigeration & Air Conditioning Technology , 9th Edition (2021) is the book. FBC Mechanical 2023 Chapter 11 still wants listed equipment, machinery-room rules when they apply, and relief that is not dumped into a return-air plenum. Chapter 20 already taught a comfort-cooling line set; this section is a colder evaporator with oil, frost, and a door .
Quick Answer: A walk-in is a room you enter; a reach-in is a cabinet. Medium-temp coils can air-defrost . Low-temp coils need electric or hot-gas defrost and a heated drain . Externally equalize a TXV that has a distributor. P-trap the suction at the unit cooler, pump down on a liquid-line solenoid, and do not set superheat with the box thermostat.
Walk-in versus reach-in
A walk-in cooler or freezer is a personnel-entry insulated enclosure — prefabricated cam-lock panels (walls, ceiling, and usually a floor) or a built-in insulated room — with a unit cooler (forced-air evaporator) on the interior and a condensing unit on the exterior roof, pad, or rack. NSF-listed panels, heated door gaskets, a lighted personnel switch, and a safety release on the door are part of the box, not extras. A reach-in is a merchandiser or worktop the operator does not walk into. Many reach-ins are self-contained (condenser in the cabinet base). Remote reach-in cases on a supermarket rack share a suction header with other evaporators — that is when EPRs and rack controls appear.
Worked box load (teaching scale). A 10×12×8-ft walk-in cooler, 38°F, Florida kitchen, is often in the 1- to 1½-ton neighborhood once infiltration, product pull-down, lights, and wall load are added — not a 5-ton comfort unit “because the kitchen is hot.” Oversizing the condensing unit short-cycles, never pulls humidity, and glazes the coil. Undersizing never recovers after a Monday delivery. Read the box manufacturer’s load sheet and the condensing-unit expanded data at the design SST/SDT (Section 22.1).
Class B may install a 10-ton walk-in plant; Class B may not install a 40-ton rack that happens to feed walk-ins (F.S. 489.105(3)(g) — any one system). Prefabricated walk-in panels are HVAC/refrigeration scope when they complete the refrigeration system ; they are not a license to build the restaurant.
Evaporators and TXVs
The unit cooler is a low-temperature evaporator with fans, a drain pan, and (on freezers) defrost heat. Hang it so the air throw covers the box without blowing a gale on product (low-velocity coils for floral, meat, and dough). Keep the coil off the door opening. Condensate must leave through a trapped drain; on a freezer that drain is in a below-freezing room, so it needs heat tape and insulation or the pan ices over and the coil sits in a glacier.
A thermostatic expansion valve (TXV) meters liquid to hold superheat at the coil outlet. Superheat = suction-line temperature at the bulb minus saturated suction temperature from the pressure at that point (Chapter 29 will diagram it; installers still have to set it). Typical medium-temp superheat is on the order of 6–10°F ; typical low-temp is often 4–8°F — use the valve manufacturer’s chart, not a 20°F air-conditioning habit. A TXV feeding a distributor (or any evaporator with a large refrigerant-side pressure drop) must be externally equalized : the equalizer tube reads pressure at the bulb location so the valve does not starve the coil. An internally equalized valve on a distributor is a classic glazed-coil, low-suction complaint.
Capillary tubes appear on small self-contained reach-ins; they are not the walk-in answer. Electronic expansion valves on racks still need a pressure transducer and a superheat control — they are not “no superheat.”
Defrost
Frost is water that belonged in the box air. It is a heat-transfer insulator . Medium-temperature coils whose fin surface stays above 32°F most of the cycle can use off-cycle (air) defrost : stop the compressor, leave the evaporator fans running, and let box air melt the frost. That does not work on a 0°F coil — the box air is below freezing.
Method Where it belongs How it is started / stopped Exam trap
Off-cycle / air Medium-temp, coil surface above freezing Box thermostat or timer stops compressor; fans run Using it on a freezer
Electric Low-temp walk-ins and reach-ins Time-initiated; time- or temperature-terminated; fans often off during heat Leaving fans on so you heat the box instead of the coil
Hot gas Racks and some walk-ins Discharge gas into the evaporator; needs piping and valves No suction trap, no drain, no termination
Time-initiated, temperature-terminated is the usual electric-defrost walk-in: a clock starts defrost; a defrost termination thermostat on the coil ends it when the coil is clear, with a fail-safe time so a stuck thermostat cannot cook the box. Drip time (fans delayed after termination) lets water leave the fins before you throw −20°F air across a wet coil and refreeze it as a sheet. Door heaters, pressure-relief ports on freezers, and lighted “person inside” switches are controls on this outline, not kitchen-accessory trivia.
Piping and oil
Suction vapor must carry oil back to the compressor. Velocity in a vertical riser is the oil-return number. A unit cooler hung above the condensing unit gets a P-trap at the evaporator outlet so oil does not sit in the coil during an off cycle, plus a trap or loop at the base of the riser as the manufacturer draws it. Slope horizontal suction toward the compressor . When the compressor unloads or cycles to a low capacity, a single riser may drop below oil-carrying velocity — that is a double suction riser (small riser for low load, both for full load). Insulate the suction to control condensation and superheat gain in a Florida penthouse.
Liquid lines are full-size from the receiver or condenser to the TXV, with a filter-drier and sight glass ahead of the valve. Hot-gas defrost adds a discharge branch, a solenoid, and often a dump tank or suction-header practice from the rack drawing — do not field-invent it. Pressure-test with oxygen-free nitrogen , then evacuate; never use refrigerant as the test gas (Section 22.1).
F.S. 489.105 still fences new building power wiring . The walk-in condensing unit’s dedicated circuit and low-voltage control wiring are HVAC; a new three-phase feeder from the restaurant switchgear is an electrical contractor . Condensate to an existing safe waste , not a direct sanitary tie (FBC 307.2.1.1 , Chapter 20).
Controls that belong on the box
A box thermostat (or electronic box control) cycles the liquid-line solenoid . The compressor then pumps down to a low-pressure cutout and stops with the crankcase empty of liquid . Short-cycling on the box thermostat without pump-down is how you slug a compressor after a defrost. A crankcase heater stays on whenever the compressor is off if the manufacturer requires it.
An evaporator pressure regulator (EPR) holds a minimum (higher) pressure — and therefore a higher SST — at a warmer coil that shares a suction header with a colder coil. A crankcase pressure regulator (CPR / holdback) limits the pressure entering the compressor so a hot pull-down does not overload the motor. Oil separators on low-temp racks keep oil in the compressor instead of in −20°F evaporators. Low-pressure, high-pressure, and oil-failure switches are safety, not operating thermostats. Chapter 27 installs the devices; this chapter applies them to the box.
Florida scenario
A certified Class B shop in Pinellas County hangs a 10×12 walk-in cooler (38°F) and an 8×10 walk-in freezer (0°F) for a St. Petersburg restaurant. The cooler unit cooler gets an externally equalized TXV , off-cycle defrost , a trapped drain to an existing safe waste, and a suction P-trap because the condensing unit sits on the pad below. Superheat is set at the bulb , not by turning the box thermostat to 30°F. The freezer gets electric defrost , time-initiated / temperature-terminated with drip time, heat tape on the drain, door heaters, and pump-down on a liquid solenoid. Both condensing units are under 25 tons and are separate circuits, so Class B may contract them. The same drawings show a 30-ton rack in a future phase feeding additional cases — that phase is Class A . Skipping 608 recovery when the old walk-in is cut out is still a federal violation.
Traps: (1) Air-defrosting a freezer. (2) Internally equalized TXV on a distributor. (3) No P-trap on a hung unit cooler. (4) Using the box thermostat as a superheat setting. (5) No drain heat on a freezer. (6) Counting two walk-ins on one rack as two 12-ton “systems” when they share a suction header.