Study guide

19.1 Fabricating Rectangular & Round Ducts

Florida HVAC Contractor License Class A/B

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility

2 Establishing the Contracting Business

2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding

3 Insurance for Florida HVAC Contractors

3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules

4 Overhead, Staffing & Markets

4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services

5 Bids, Proposals & Estimating

5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing

6 Purchasing, Invoices, Draws & Safety Programs

6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)

7 Managing Contracts

7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk

8 Managing Trade Operations

8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory

9 Accounting I: Receivables, Payables & Cash

9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios

10 Accounting II: Taxes, Job Cost & Payroll

10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments

11 Managing Human Resources

11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees

12 Florida Contractor Law: Chapter 489 & 61G4

12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities

13 Florida Construction Lien Law (Chapter 713)

13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien

14 Financial Responsibility, CE & Federal Rules

14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules

15 Plans, Specs & Equipment Selection

15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness

16 Energy Codes, Loads & Thermal Resistance

16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves

17 HVAC System & Duct Design

17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes

18 Piping, Pumps, Boilers, Controls & Rigging Design

18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment

19 Sheet Metal Duct Fabrication

19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans

20 Split, Package & Heat Pump Installation

20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems

21 Large Systems, Chillers & Towers

21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems

22 Refrigeration, Coolers, Ventilation & Controls Install

22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests

23 Condensers, Compressors & Air Handlers

23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips

24 Duct, Fans, Filters & Terminals

24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances

25 Refrigerant Piping & Joining

25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing

26 Metering Devices & Line Components

26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories

27 Controls Installation

27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches

28 Motors, Wiring & Electrical Installation

28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe

29 Diagnostic Analysis: Refrigeration

29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments

30 Diagnostic Analysis: Electrical & Instruments

30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges

31 Recovery, Repair & Calibration

31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls

32 Mechanical Service & Cleaning

32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains

33 Jobsite Safety & Equipment

33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors

34 Energy Management

34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs

35 Indoor Air Quality

35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects

19.1 Fabricating Rectangular & Round Ducts

Key Takeaways Explain This Topic AI

Trade Area B (sheet-metal ducts) is 9 percent of both the Class A and Class B trade exams; the outline splits rectangular under 2 feet, rectangular over 2 feet, and round.

SMACNA HVAC Duct Construction Standards, Metal and Flexible, 4th Edition (2020) is the construction book: lookup pressure class (½, 1, 2, 3, 4, 6, or 10 in. w.g., positive or negative), largest rectangular side or round diameter, and transverse joint spacing, then read gauge and reinforcement.

FBC Mechanical 2023 Section 603.4 sends metallic ducts to SMACNA; the dwelling-unit exception (Table 603.4) only covers ½-inch and 1-inch water gauge and dimensions through about 20 inches, so a 24-inch (2-foot) side is already a SMACNA-table problem.

Round metallic joints need not less than three equally spaced screws or rivets (FBC Mechanical 603.4.1); tape or mastic alone is not the mechanical fastener.

Negative-pressure return and exhaust try to collapse the duct; SMACNA negative rows often add reinforcement sooner than the matching positive-pressure row of the same class.

Last updated: August 2026

19.1 Fabricating Rectangular & Round Ducts

Trade Area B (Sheet Metal Ducts) is 9 percent of both the Class A and Class B trade exams. The CILB outline splits the shop work into rectangular ducts under 2 feet , rectangular ducts over 2 feet , and round ducts . Chapter 17 sized the duct with the Ductulator. This chapter builds it. The 2026 Air Conditioning CBT references that matter here are SMACNA HVAC Duct Construction Standards Metal and Flexible, 4th Edition (2020) , SMACNA Fibrous Glass Duct Construction Standards, 8th Edition (2021) , and Florida Building Code — Mechanical, 2023 Chapter 6. Kitchen grease duct is still NFPA 96 (2021) and FBC Mechanical Chapter 5 — that metal is not a 26-gauge snap-lock (Section 19.4).

Quick Answer: Pressure class is the static the shop builds to (½ through 10 in. w.g., positive or negative). Gauge and reinforcement come from the SMACNA tables using that class, the largest rectangular side (or round diameter), and joint spacing . Under 2 feet (24 inches) is typically light-gauge, S-slip and drive, Pittsburgh or snap-lock, little or no intermediate stiffener. Over 2 feet is standing seams, TDC/TDF, angles, and tie rods. Round uses hoop strength and lighter metal. FBC Mechanical 603.4 sends you to SMACNA except a dwelling-unit table that stops at about 20 inches and 1 in. w.g.

Why gauge is not a coil-line habit

Pearson VUE will hand you a width, a pressure class, and a joint spacing and ask which SMACNA row you are on. “We always run 26 gauge” is not an answer. Pressure class is a construction rating: ½, 1, 2, 3, 4, 6, or 10 in. w.g. , positive or negative . It is not the blower’s nameplate external static. A 2-inch-class supply trunk on a 16-ton rooftop is built to 2 in. w.g. even if the fan is scheduled for 1.4 in. external static. Specs that say “SMACNA 2 inch” mean the 2 in. w.g. table , not 2-inch-thick metal.

Negative pressure (return and exhaust) tries to collapse the duct. SMACNA prints separate negative-pressure rows that often add reinforcement sooner than the matching positive row. Building a 36-inch return like a 36-inch supply because “it is the same size” is how you oil-can a ceiling.

FBC Mechanical 2023 Section 603.4 states that metallic ducts shall be constructed as specified in SMACNA HVAC Duct Construction Standards — Metal and Flexible. Exception: ducts in single dwelling units may use Table 603.4 , which only goes to ½-inch and 1-inch water gauge and to about 20 inches of dimension. A 24-inch (2-foot) side, or any 2-inch class duct, is already off Table 603.4 and on the SMACNA book. That is why the CILB outline splits under 2 feet from over 2 feet .

SMACNA rectangular lookup, every time:

Pressure class (½ through 10 in. w.g.), and whether the duct is positive or negative .

Largest side of the rectangle — not the short side, not equivalent round diameter, not cfm.

Transverse joint spacing (commonly 4, 5, 6, 8, or 10 feet of duct between joints).

Read minimum galvanized gauge and the reinforcement code (joint type plus any intermediate stiffeners or tie rods).

The tables assume G-60 lock-forming galvanized steel (ASTM A653 / A924). Stainless or aluminum is a corrosion choice; you still have to meet the stiffness of that SMACNA row. Cross-breaking or beading flat panels adds stiffness but does not let you skip a required angle or tie rod.

Rectangular under 2 feet

A 20×12 trunk has a largest side of 20 inches — under 2 feet. At ½-inch or 1-inch class, the light-pressure SMACNA rows commonly land on 26 gauge , Pittsburgh or button-punch snap-lock longitudinal seams (Section 19.2), and S-slip and drive transverse joints (SMACNA T-1 / T-5 family) at 4- or 5-foot lengths, with no intermediate reinforcement . That is the residential and light-commercial coil-line product. Aspect ratio is still the Chapter 17 design limit (keep near 4:1 ); fabrication still has to close the lock on that 20-inch side. A 20×5 pancake (AR = 4) is under 2 feet on the long side and still a miserable friction and metal-area choice.

Worked example. A Class B qualifier in Polk County builds a 16×12 supply (largest side 16 in. ) at 1 in. w.g. positive, 5-foot joints. Open SMACNA 4th 2020 to the 1 in. w.g. rectangular table. Find 16 inches , the column for 5-foot spacing, and read the gauge and whether a reinforcement letter is required. You do not jump to 18 gauge because “commercial always uses 18.” You do not use FBC Table 603.4 if this is a tenant-fit strip center — that table is the dwelling-unit exception.

Rectangular over 2 feet

A 36×12 trunk has a largest side of 36 inches — over 2 feet . At 2 in. w.g. , the same 5-foot joint spacing now demands heavier gauge and/or standing joints and intermediate reinforcement . Typical hardware once you cross 24 inches at commercial pressure:

Standing S-slips , bar slips , or TDC/TDF (SMACNA T-25a / T-25b) four-bolt companion flanges with gasket.

External angles on the wide sides, spaced per the table.

Tie rods (internal) on very wide ducts, with SMACNA washers so the rod does not become a dirt dam or a liner snag.

Failure mode on a 36-inch unreinforced 26-gauge panel at 2 in. w.g. is oil-canning, seam pop, and collapse on the negative side . The 2-foot line on the exam is this stiffness jump, not a license-class line. Class A and Class B both fabricate over-2-foot duct; Class B is still capped at 25 tons / 500,000 Btu per system (F.S. 489.105(3)(g) ), but a 16-ton 32-inch main is Class B work that still uses the over-2-foot table.

Negative 2 in. w.g. on a 40-inch return is often one table heavier than the matching supply. Exhaust that is not grease duct still follows SMACNA HVAC tables. Type I grease duct is FBC 506.3 / NFPA 96 : 16-gauge steel or 18-gauge stainless , continuous liquid-tight weld — not a 26-gauge snap-lock (Section 19.4).

Lookup Under 2 ft (largest side ≤ 24 in.) Over 2 ft (largest side > 24 in.)

Typical ½–1 in. w.g. positive 26 ga, Pittsburgh or snap-lock, S-slip and drive, often no intermediate stiffener Standing S or TDC, possible angles; do not keep the residential recipe

Typical 2 in. w.g. May still be light if the side is small — read the table Heavier gauge and/or standing joints, angles, tie rods

Negative of the same class Check the negative row; collapse is the failure Negative row almost always stiffens sooner

FBC Table 603.4 Dwelling-unit exception only, and it stops near 20 in. / 1 in. w.g. Off the dwelling table; SMACNA 4th 2020

Round ducts

Round duct has the least perimeter per area , so the least metal and the least leakage for a given cfm. Hoop strength lets SMACNA round tables use lighter gauge than a rectangular duct of the same capacity and pressure class. A 14-inch spiral supply at 2 in. w.g. is a different row from a 14×14 rectangle.

  • Round product How it is made Exam use
  • Spiral lockseam Helical lockseam from coil Default commercial round; low leakage; listed pressure class

Longitudinal snap-lock / grooved Pipe machine, snap or grooved long seam Light commercial and residential; pressure class limited compared with spiral

Welded longitudinal Shop-welded pipe High pressure; kitchen grease uses the 16/18-gauge welded rule, not HVAC spiral

Joints: crimp-and-bead (male crimp into the female bead) or couplings . FBC Mechanical 603.4.1: round metallic ducts shall be mechanically fastened with not less than three sheet-metal screws or rivets spaced equally around the joint. If the joint is partly inaccessible, three fasteners go on the exposed portion so the pipe cannot hinge. Tape or mastic alone is not the mechanical fastener. Seal the joint after it is screwed (Section 19.2).

Worked example. 1,200 cfm on 12-inch round at about 1,500 fpm. The shop builds spiral , 2 in. w.g. class to match the air handler, bead-crimp joints, three screws , then Seal Class A mastic. Substituting 12-inch flex for that trunk is not SMACNA metal construction. Flex is a listed UL 181 connector, fully extended, for short runouts — Chapter 24 hangs it; this chapter does not fabricate it.

Sheet metal vs fibrous glass vs flex

Sheet metal (galvanized, aluminum, stainless) is the SMACNA 4th 2020 metal book. Fibrous glass duct board is the 8th Edition 2021 fibrous-glass standard: rigid board, UL 181 Class 1, closed with 181A-P / 181A-M / 181A-H , limited pressure (commonly 2 in. w.g. class) and velocity. Flexible duct is listed UL 181B . The shop does not “fabricate” flex. Duct board is not interior-lined metal (Section 19.2). FBC Energy Conservation 2023 still wants attic metal R-8 (3 inches diameter and up) and a seal; construction class and insulation class are different rows on the takeoff.

Florida HVAC scenario

Gulf Coast Mechanical, a certified Class B shop in Lee County, takes a 16-ton (under 25-ton) strip-center job. Drawings say 2 in. w.g. supply and 1 in. w.g. return. The estimator prices every rectangle as 26 gauge, 5-foot S-slip and drive because that is what the residential coil line makes. The 18×12 runouts (under 2 feet) at 1 in. w.g. return may actually be 26-gauge unreinforced. The 32×16 supply main (largest side 32 in. — over 2 feet) at 2 in. w.g. is not . SMACNA 4th 2020 wants a heavier row: standing joint or TDC, possibly tie rods. Round 18-inch spiral for the same cfm would drop metal weight and leakage. Class B may fabricate all of this — Trade B is 9 percent on both outlines , and 16 tons is inside 489.105(3)(g) . The failure is using the under-2-foot recipe on an over-2-foot pressure-class table.

Traps: (1) Reading FBC Table 603.4 on a commercial 2-inch-class trunk. (2) Using the short side of a 36×10 pancake as the lookup dimension. (3) Treating 24 inches as “still residential.” (4) Fastening round pipe with tape only. (5) Building negative-pressure return like positive-pressure supply of the same size.

Loading diagram... SMACNA rectangular and round construction lookup