Study guide

19.2 Seams, Locks, Taping, Mastics & Liners

Florida HVAC Contractor License Class A/B

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & License Classes 1.2 Exam Format, Open-Book Rules & Pearson VUE 1.3 Eligibility, Experience Paths & Financial Responsibility

2 Establishing the Contracting Business

2.1 Business Organizational Structure 2.2 Business Plan, Marketplace & License Scope 2.3 Professionals, Fixed Assets & Bonding

3 Insurance for Florida HVAC Contractors

3.1 Obtaining Insurance (GL, Workers' Compensation & Bonds) 3.2 Coverages, Limits & Policy Language 3.3 Maintaining Insurance & CILB Certificate-Holder Rules

4 Overhead, Staffing & Markets

4.1 Developing the Business, Staffing & Markets 4.2 Determining Business Overhead (FICA, FUTA, SUTA, Workers' Comp, Rent & Utilities) 4.3 Determining Outsourced Services

5 Bids, Proposals & Estimating

5.1 Preparing Bids and Proposals 5.2 AIA Documents, Offers & Contract Components 5.3 Labor Productivity, Overhead & Project Costing

6 Purchasing, Invoices, Draws & Safety Programs

6.1 Purchasing Materials, UCC & Inventory (FIFO) 6.2 Invoices, Draw Requests & Percentage of Completion 6.3 Developing a Safety Program (OSHA, SDS & Drug Testing)

7 Managing Contracts

7.1 Contract Law, Scope & Completion Schedules 7.2 Florida Lien Law Inside Contracting 7.3 Mediation, Arbitration, Tort Law & Risk

8 Managing Trade Operations

8.1 Scheduling Trade Operations (CPM, RFI & Submittals) 8.2 OSHA Records, Document Retainage & Penalties 8.3 Takeoffs, Equipment Lease vs Purchase & Inventory

9 Accounting I: Receivables, Payables & Cash

9.1 Managing Accounts Receivable 9.2 Managing Accounts Payable & Discounts 9.3 Cash Flow, Banking & Financial Ratios

10 Accounting II: Taxes, Job Cost & Payroll

10.1 Filing Tax Forms & Returns 10.2 Tracking Job Costs 10.3 Payroll, Employment Taxes & Garnishments

11 Managing Human Resources

11.1 Hiring, I-9, Background Checks & Discrimination 11.2 HR Policies, OSHA & Drug-Test Chain of Custody 11.3 Evaluating Employees

12 Florida Contractor Law: Chapter 489 & 61G4

12.1 Chapter 489: Certified vs Registered & Qualifying Agents 12.2 61G4 Board Rules, Advertising & Discipline 12.3 Qualifying Agent Duties, Supervision & Additional Entities

13 Florida Construction Lien Law (Chapter 713)

13.1 Construction Lien Overview & Claimants 13.2 Notices to Owner, Time Limits & Perfecting Liens 13.3 Payment Bonds, Waivers & Claims of Lien

14 Financial Responsibility, CE & Federal Rules

14.1 Financial Responsibility & the 660 FICO Rule 14.2 Continuing Education & Biennial Renewal 14.3 Federal Employment, Immigration, OSHA & Environmental Rules

15 Plans, Specs & Equipment Selection

15.1 Reading Plans, Specifications, Symbols & Scales 15.2 Recommending Plan Changes & Equipment Types 15.3 EER, SEER, ARI Listings & Cost Effectiveness

16 Energy Codes, Loads & Thermal Resistance

16.1 Florida Energy Codes, R-Values & U-Factors 16.2 Determining HVAC Heating & Cooling Loads 16.3 Applying Energy Conservation, Fan Curves & Pump Curves

17 HVAC System & Duct Design

17.1 Designing HVAC Systems (Psychrometrics, Enthalpy & Airflow) 17.2 Designing Duct Systems & Insulation 17.3 Selecting Equipment, Location & Codes

18 Piping, Pumps, Boilers, Controls & Rigging Design

18.1 Pipe Sizing, Valves, Fittings, Sealants & Layout 18.2 Control Requirements, Fan Motors, CFM & Compressor Capacity 18.3 Pumps, Boilers, Steam, Fuel & Pipe Insulation 18.4 Grease Ducts, Live Loads, Rigging & Mechanical Equipment

19 Sheet Metal Duct Fabrication

19.1 Fabricating Rectangular & Round Ducts 19.2 Seams, Locks, Taping, Mastics & Liners 19.3 Fittings, Outlets & Grilles 19.4 Kitchen Hoods, Exhausts & Drain Pans

20 Split, Package & Heat Pump Installation

20.1 Installing Split & Package Air Conditioners 20.2 Installing Split & Package Heat Pumps 20.3 Air-Cooled vs Water-Cooled Systems

21 Large Systems, Chillers & Towers

21.1 Installing by Tonnage & Class A vs Class B Limits 21.2 Chilled Water, Water Towers & Secondary Coolant 21.3 Centrifugal, Absorption & Ammonia Systems

22 Refrigeration, Coolers, Ventilation & Controls Install

22.1 Low, Medium & Ultra-Low Temperature Systems & EPA Rules 22.2 Walk-In & Reach-In Coolers 22.3 Ventilation, Exhaust, Makeup Air, Grease Ducts & Kitchen Exhaust 22.4 Geothermal, Pneumatic & DDC Controls, TAB & Smoke Tests

23 Condensers, Compressors & Air Handlers

23.1 Installing Air-Cooled & Water-Cooled Condensers 23.2 Hermetic, Semi-Hermetic & Centrifugal Compressors 23.3 Air Handlers, Evaporators, Heat Exchangers, Receivers & Heat Strips

24 Duct, Fans, Filters & Terminals

24.1 Installing Sheet Metal, Fiberglass & Flexible Duct 24.2 Fans, Blowers, Motors, Grilles, Registers & Fire Dampers 24.3 Filters, Flues, Warm-Air, Gas & Fuel-Oil Appliances

25 Refrigerant Piping & Joining

25.1 Refrigerant Piping, Copper Tubing & Pipe Sizing 25.2 Brazing, Welding, Flaring, Swaging & Soldering 25.3 Steel Pipe, Plastic Pipe, Threading & Oxy-Acetylene 25.4 Hangers, Supports, Horizontally Supported Piping & Pressure Testing

26 Metering Devices & Line Components

26.1 TXVs, Capillary Tubes, Reversing Valves & Metering Devices 26.2 Liquid, Suction & Heat-Pump Dryers, Filters & Oil Traps 26.3 Receivers, Heat Strips, Gas/Oil Appliances & Related Accessories

27 Controls Installation

27.1 Pressure, Temperature, Humidity & Bellows Controls 27.2 Thermostats, Humidistats, Pneumatic & Solid-State Controls 27.3 Transformers, Capacitors, Contactors, Relays & Safety Disconnects 27.4 Defrost Components, Starters, Solenoids & Limit Switches

28 Motors, Wiring & Electrical Installation

28.1 Wiring Single-Phase & Three-Phase Equipment 28.2 Motor Types, Protection, Controllers, Belts & Pulleys 28.3 Geothermal Loops, Surge Protectors, Phase Monitors & Plastic Pipe

29 Diagnostic Analysis: Refrigeration

29.1 Pressure-Enthalpy Diagrams & Operating Pressures 29.2 Air Volumes, Enthalpy, Wet-Bulb & Dry-Bulb 29.3 Leak Detection & Refrigeration Test Instruments

30 Diagnostic Analysis: Electrical & Instruments

30.1 Current Draw, Voltage, Power & Motor Terminals 30.2 Testing Relays, Capacitors, Starters, Transformers & Defrost Stats 30.3 Using Amprobes, Velometers, Pitot Tubes, Manometers & Gauges

31 Recovery, Repair & Calibration

31.1 Nitrogen & Gas Regulators, Recovery & Retrofit 31.2 Repairing Hermetic, Semi-Hermetic, Centrifugal Compressors & Blowers 31.3 Calibrating Thermostats, Pressure Switches & Pneumatic Controls 31.4 Superheat, Safety Cutouts, Defrost Clocks & Freezer Controls

32 Mechanical Service & Cleaning

32.1 Belts, Pulleys, Motor Rotation & Seized Compressors 32.2 Crankcase & Evaporator Pressure Regulators & Unloaders 32.3 Cleaning Towers, Condensers, Foreign Matter & Condensate Drains

33 Jobsite Safety & Equipment

33.1 PPE: Hearing, Head, Eye, Face & Respiratory Protection 33.2 Lockout/Tagout, Warning Signs, Toxic Materials & Ventilation 33.3 Rigging, Hoists, Cranes, Forklifts, Backhoes & Excavation 33.4 Ladders, Scaffolds, Tools & Air Compressors

34 Energy Management

34.1 Envelope, Duct Pressure & Blower-Door Testing 34.2 Efficient Equipment, Zoning, ERVs, Wi-Fi Thermostats & Green Buildings 34.3 Energy Forms, R/U Factors, Window Heat Gain & Florida Load Calcs

35 Indoor Air Quality

35.1 Ventilation, Filtration, Humidity, UV & Air Cleaners 35.2 Contaminants, Source Control, TAB & Human Health Effects

19.2 Seams, Locks, Taping, Mastics & Liners

Key Takeaways Explain This Topic AI

A Pittsburgh lock is a formed pocket-and-insert longitudinal seam that is hammered or machine-closed; it is the default rectangular metal long seam up through typical 2- and 3-inch pressure classes.

Button-punch snap lock is faster and has no closing hammer blow, but it is a lower-pressure residential/light-commercial lock; it is not a substitute for a Pittsburgh or standing seam on a 2-inch-class over-2-foot main.

Standing seams and standing-S / TDC-TDF joints add a stiffening rib or flange; they show up on the over-2-foot and higher-pressure SMACNA rows, not as decoration.

Seal Class A seals transverse joints, longitudinal seams, and duct-wall penetrations; Seal Class B seals joints and seams; Seal Class C seals joints only. SMACNA historically maps 4 in. w.g. and up to A, 3 in. to B, and 2 in. and under to C, but FBC Energy Conservation 2023 still wants ducts sealed, and many Florida specs require Class A on everything.

Interior liner is adhesive plus mechanical fasteners (weld pins), metal nosing on leading edges in high-velocity airstreams, and a net-free-area penalty of twice the liner thickness on each internal dimension; fibrous-glass board closures are UL 181A-P, 181A-M, or 181A-H — cloth duct tape is not a listed closure.

Last updated: August 2026

19.2 Seams, Locks, Taping, Mastics & Liners

The same Trade Area B 9 percent that asked you to pick a gauge now asks you to tape seams , build standing seams , snap lock , and other locks and seams , and to fabricate interior-lined sheet metal . Open SMACNA HVAC Duct Construction Standards, 4th Edition (2020) for metal locks and seal class, and SMACNA Fibrous Glass Duct Construction Standards, 8th Edition (2021) for duct-board closures. FBC Mechanical Chapter 6 and FBC Energy Conservation R403.3 / C403 still want the finished duct sealed .

Quick Answer: Pittsburgh is the pocket-and-insert longitudinal lock you close with a hammer or machine. Snap lock (button-punch) snaps together for low-pressure residential work. Standing seams and TDC/TDF add a rib or flange for wide, high-pressure duct. Seal Class A seals joints, seams, and penetrations. Interior liner is adhesive plus pins plus metal nosing — it is not a roll of insulation stuffed in a trunk. Fibrous-glass board uses UL 181A tape or mastic, not cloth duct tape.

Pittsburgh lock

A Pittsburgh lock (SMACNA longitudinal type used on most rectangular coil-line duct) is a female pocket formed on one edge and a male flange formed on the mating edge. The male side is inserted into the pocket and the pocket is closed — hammer, screwdriver, or a Pittsburgh-closing rolls/machine. A well-closed Pittsburgh is a strong, relatively tight long seam through ordinary 2- and 3-inch HVAC classes when the gauge matches the table. Leaving the pocket open “because mastic will fill it” is not a closed Pittsburgh. The pocket sits on a corner ; you do not run a Pittsburgh down the middle of a 36-inch panel and call it a standing seam.

Shop sequence on a coil line: form the two longs, form the two shorts (or wrap a single wrapper), snap or Pittsburgh the longs, then add the transverse joint profile (S-slip/drive, standing S, or TDC/TDF). On the exam, “Pittsburgh” means that pocket lock , not “any shop seam.”

Snap lock

Button-punch snap lock (and grooved snap lock) forms two edges so they snap together. There is no closing hammer blow. It is faster on residential and light-commercial 26-gauge duct. It is also easier to open under handling, roof traffic, or higher static. SMACNA and shop ratings typically keep snap lock on lower pressure classes — think 2 in. w.g. and under on modest widths, not a 4-inch-class 40-inch main. Substituting snap lock for a specified Pittsburgh on a 2-inch-class over-2-foot trunk is a failed submittal, not a labor savings.

Worked comparison. A 14×8 bedroom run at ½ in. w.g. : snap lock longs, S-slip and drive, Seal Class A mastic at the drives — legal residential construction. A 30×12 2-inch-class supply: Pittsburgh or standing seam longs, standing S or TDC, reinforcement per the table. Snap-locking that 30-inch wrapper because the button-punch machine is free is the Trade B trap.

Standing seams and other locks

A standing seam turns both edges up, engages them, and leaves a standing rib . That rib is both a lock and a stiffener . It appears on larger rectangular duct and on some high-pressure work. Do not confuse it with a Pittsburgh, which lies flat in the corner.

Transverse joints (the ends you connect in the field) are a different SMACNA family:

  • Joint / seam Where it lives Exam trap
  • Pittsburgh Longitudinal, rectangular corners Leaving the pocket unclosed
  • Snap lock / button punch Longitudinal, low-pressure Using it on a 2-inch-class wide main
  • Grooved (Acme) lock Longitudinal, some pipe and light duct Treating it as a grease-duct weld
  • Standing seam Longitudinal rib that stiffens Calling any standing S-slip a “Pittsburgh”

S-slip and drive (T-1 / T-5) Transverse, light gauge Drive on the wide side with no standing reinforcement when the table wants a standing joint

Standing S, bar slip Transverse, more stiffness Using a flat drive as the only reinforcement on a 36-inch panel

  • TDC / TDF (T-25a / T-25b) Transverse four-bolt flange, gasketed Skipping the gasket and calling it sealed
  • Companion angle / welded flange High pressure, industrial, grease Screws through a grease-duct wall
  • Spiral lockseam / pipe snap lock Round longitudinal Counting the spiral as the three-screw transverse joint

Welded seams belong on high-pressure industrial duct and on Type I grease duct (continuous liquid-tight external weld, FBC 506.3.2). Screws, rivets, and Pittsburgh locks shall not penetrate a grease-duct wall for supports.

Taping, mastics, and seal class

SMACNA seal class tells you what you seal; leakage class (cfm per 100 ft² of duct surface at a test pressure) tells you how tight the assembled system must test.

Seal class What you seal Historical SMACNA pairing

A Transverse joints , longitudinal seams , and duct-wall penetrations (spin-ins, damper rods, hanger rods that pierce the wall) 4 in. w.g. and higher

B Joints and seams 3 in. w.g.

C Transverse joints only 2 in. w.g. and under

Those historical pairings are the SMACNA default if the spec is silent . They are not a Florida energy-code holiday. FBC Energy Conservation 2023 requires ducts and air handlers to be sealed ; many Division 23 specs simply say Seal Class A on every pressure class. On the exam, if the question states a pressure class and asks the SMACNA default, use the table above. If the question states an energy-code or “all ducts sealed” spec, seal joints, seams, and penetrations.

Mastic (water-based or solvent, listed for the use) is the primary sealant on metal joints. Brush or trowel it onto the assembled joint so it bridges the gap; a thin smear that you cannot see after paint is not a seal. Gaskets belong in TDC/TDF and companion flanges and must be compressed by the bolts. Listed foil tapes can close accessible metal joints when the listing and SMACNA/spec allow; SMACNA has long warned that ordinary pressure-sensitive tape is a poor primary sealant on metal, especially where the joint can move.

Fibrous glass duct board (8th Edition 2021) is a different closure system. All closures shall meet UL 181 or UL 181A . Printed markings:

  • 181A-P — pressure-sensitive tape
  • 181A-M — mastic
  • 181A-H — heat-activated (heat-seal) tape

Flexible duct uses UL 181B ( 181B-FX tape, 181B-M mastic), plus a mechanical fastener (clamp or strap) — tape alone is not the listed flex connection. Cloth “duct tape” is not 181A or 181B. Using it on Florida attic duct is a failed inspection and a failed exam item.

Worked seal example. A 2-inch-class 24×12 trunk with Pittsburgh longs, TDC joints, and two spin-in taps: Seal Class A means mastic or gasket at every TDC, close and seal the Pittsburgh if the spec/class requires seams (Class A and B), and seal the spin-in collars where they pierce the wall. Sealing only the TDC (Class C) leaves the spin-ins leaking into a 130°F Florida attic.

Interior-lined sheet metal

Interior liner is acoustical/thermal insulation inside the metal. Typical HVAC liner is 1 inch (sometimes 2 inch ), 1.5 pcf or 3 pcf , mat-faced so the airstream does not erode fibers. Installation, per SMACNA and the liner manufacturer:

Adhesive on the metal, covering the specified percentage of the surface (often essentially full coverage except at fastener washers).

Mechanical fasteners — welded pins or impact-welded nails with washers — typically starting about 4 inches from edges and corners and then on a grid (commonly on the order of 16 inches on center; follow the liner and SMACNA pin-spacing chart for the velocity).

Metal nosing (channel or zee) on leading edges facing the fan, at fan discharges, and wherever velocity would lift the facing. High-velocity systems (on the order of 4,000 fpm and up, and always at the fan blast area) do not get a raw liner edge.

Butt joints in the liner tight; no gaps that dump fibers into the coil.

Net free area: 1-inch liner on all four sides of a 20×12 duct leaves 18×10 of air path. Size the metal up, or you just stole the Chapter 17 cfm. A designer who says “20×12 lined” usually means 20×12 inside metal with liner eating the area unless the schedule says “clear inside.”

Do not line Type I grease duct, dishwasher-steam Type II that the listing forbids, outdoor duct without a weather jacket, or a duct that will run wet (untreated outdoor air without a drain). NFPA 90A (2015) still wants liner with a flame-spread index not over 25 and smoke-developed not over 50 . Lined duct is not fibrous-glass board ; board is the 8th Edition 2021 book and has its own tie-rod and closure details.

Florida HVAC scenario

A Class A shop in Broward fabricates a 3-inch-class 40×20 supply off a large air handler (over 25 tons — Class A statutory territory) and a 1-inch-class 20×12 return. The 40×20 gets Pittsburgh longs and TDC with gasket, Seal Class A (joints, seams, penetrations), 1-inch liner with pins and a metal nosing at the fan discharge, and the metal is oversized so the net inside matches the Ductulator size. The 20×12 return is snap-lock, S-slip and drive, unlined, Seal Class A because the energy spec said so even though SMACNA’s silent default at 1 inch is Class C. The helper wants to close the fibrous-glass outside wrap joints with cloth tape leftover from a flex job. Wrong book: exterior wrap is a jacket, not 181A board closure, and cloth tape is still not 181A-P. Class B candidates still need this theory; the Class B outline does not drop Trade B, it drops the 25–100 ton install cluster.

Traps: (1) Snap lock on a specified Pittsburgh. (2) Seal Class C on a spec that said A. (3) Liner with adhesive and no pins. (4) Forgetting the 2× liner-thickness area penalty. (5) 181B flex tape on 181A duct board, or cloth tape on either.

Loading diagram... Pittsburgh vs snap lock vs standing seam vs seal class