Study guide

3.3 Insurance, Workers' Compensation & Risk Management

Florida Certified Roofing Contractor CCC

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 Current Exam Facts: Trade Knowledge & Business & Finance

2 Chapter 1: Licensing, Florida Statutes & Business Setup

1.1 DBPR, CILB & Florida Statute 489 Licensing Requirements 1.2 Entity Selection, Financial Stability & Credit Requirements 1.3 Continuing Education, Renewal & Disciplinary Actions

3 Chapter 2: Florida Roofing Law, Contracts & Consumer Protection

2.1 Florida Construction Lien Law (F.S. 713) & Notice to Owner Rules 2.2 Roofing Contract Requirements, Disclosures & Consumer Protections 2.3 Dispute Resolution, Construction Defects & Warranty Laws

4 Chapter 3: Accounting, Taxes, Payroll & Financial Management

3.1 Contractor Financial Statements, Ratios & Working Capital 3.2 Federal, State & Local Tax Compliance and Payroll Taxes 3.3 Insurance, Workers' Compensation & Risk Management 3.4 Managing Human Resources & Employment Law 3.5 Environmental Compliance: NPDES, Stormwater & Site Controls

5 Chapter 4: Roofing Estimating, Job Site & Project Management

4.1 Roofing Estimating, Takeoffs & Material Calculations 4.2 Job Site Operations, Scheduling & Quality Control 4.3 Subcontractor Management & Code Compliance Inspections

6 Chapter 5: Equipment, OSHA Safety & Fall Protection

5.1 OSHA 1926 Subpart M Fall Protection Standards for Roofing 5.2 Roofing Equipment Safety: Kettles, Hoists, Ladders & Scaffolding 5.3 Personal Protective Equipment, Hazardous Materials & Heat Stress

7 Chapter 6: Built-Up Roofing (BUR) & Modified Bitumen Systems

6.1 Built-Up Roof (BUR) System Design, Substrates & Insulation 6.2 BUR Application Techniques: Hot Asphalt, Torch & Cold-Applied 6.3 Modified Bitumen (APP & SBS) Systems & Flashings 6.4 BUR & Mod Bit Maintenance, Repairs & Test Cuts

8 Chapter 7: Single-Ply Roofing & Architectural Metal Systems

7.1 Single-Ply Membranes: TPO, EPDM & PVC Systems 7.2 Single-Ply Attachment Methods: Adhered, Mechanically Fastened & Ballasted 7.3 Architectural & Structural Metal Roofing Systems 7.4 Metal Roof Flashing, Underlayments & Thermal Movement

9 Chapter 8: Steep-Slope Roof Assemblies & Fastening Systems

8.1 Asphalt Shingle Installation, Underlayment & Ventilation Requirements 8.2 Wood Shingles, Wood Shakes & Synthetic Slate Materials 8.3 Concrete & Clay Tile Roof Systems: Loading, Layout & Underlayment 8.4 Tile Roof Fastening: Mechanical, Mortar & Two-Component Adhesive Systems

10 Chapter 9: Waterproofing, Drainage & High-Velocity Hurricane Zone (HVHZ) Provisions

9.1 Below-Grade & Above-Grade Membrane Waterproofing & Dampproofing 9.2 Roof Drains, Scuppers, Gutters, Downspouts & Overflow Systems 9.3 Florida Building Code (FBC) General Roofing Requirements 9.4 High-Velocity Hurricane Zone (HVHZ) Standards (Miami-Dade/Broward FBC Sec 1512-1525)

3.3 Insurance, Workers' Compensation & Risk Management

Key Takeaways Explain This Topic AI

Florida Licensing Board rules (Rule 61G4-15.003) mandate minimum Commercial General Liability (CGL) limits of $100,000/$25,000 for roofing contractors, though commercial job specifications typically mandate $1M/$2M limits.

CGL policies cover third-party bodily injury and third-party property damage resulting from work, but exclude coverage for repairing the contractor's own poor workmanship.

Under Florida Statute Chapter 440, construction employers with ONE (1) or more employees (including full-time, part-time, and corporate officers) are required to maintain Workers' Compensation coverage.

A maximum of THREE (3) corporate officers or LLC members owning at least 10% of the entity may elect to exempt themselves from Workers' Comp in construction by filing Form DWC-250.

Experience Modification Rate (EMR) reflects a contractor's relative safety record compared to industry averages; an EMR below 1.00 yields premium discounts, while frequency of claims impacts EMR more heavily than severity.

Last updated: July 2026

3.3 Insurance, Workers' Compensation & Risk Management

Roofing is designated as one of the highest-risk construction trades by state licensing authorities and insurance rating bureaus. Roofing contractors operating in Florida must maintain compulsory liability insurance and statutory workers' compensation coverage to maintain licensing with the Florida Construction Industry Licensing Board (CILB) under the Department of Business and Professional Regulation (DBPR). Understanding policy structures, Florida Statute Chapter 440 compliance, and safety risk management is essential.

1. Commercial General Liability (CGL) & Risk Management

Commercial General Liability insurance protects roofing contractors against third-party financial claims resulting from bodily injury, property damage, or personal injury occurring on jobsites or after completion.

DBPR Minimum Liability Insurance Requirements

According to Florida Administrative Code Rule 61G4-15.003 , certified roofing contractors must maintain minimum CGL policy limits prior to obtaining or renewing an active license:

General Liability Limit : Minimum $100,000 for Public Liability (Bodily Injury) and $25,000 for Property Damage, OR a $300,000 Combined Single Limit (CSL).

Property Damage Exclusions : Policy certificates submitted to the CILB must explicitly confirm that property damage liability coverage includes Complete Operations and does not exclude roof blowout or water intrusion liability.

Commercial Market Reality : While state licensing minimums are low, virtually all commercial contracts, project owners, and general contractors require roofing contractors to carry $1,000,000 per occurrence / $2,000,000 general aggregate liability coverage plus an Commercial Umbrella/Excess Policy.

What CGL Covers vs. Excludes

Covered Claims Excluded Claims

Third-Party Bodily Injury : A passerby is injured by falling roofing slate or tools dropped from a roof deck. Faulty Workmanship : The cost to tear out and replace the contractor's own improperly installed flashing or shingles.

Third-Party Property Damage : Rain leaks through an open roof during tear-off, ruining the building owner's interior computer equipment and drywall. Contractor Owned Equipment : Damage to the contractor's own ladder, crane, or brake press (covered separately under an Inland Marine policy).

Completed Operations : A roof installed 6 months ago leaks during a storm, damaging tenant property. Employee Injuries : Work-related injuries to roofer employees (covered exclusively under Workers' Compensation).

2. Florida Workers' Compensation Law (Florida Statute Chapter 440)

Florida maintains strict workers' compensation requirements to ensure injured construction workers receive medical care and disability compensation. Chapter 440 of the Florida Statutes sets statutory rules specifically tailored to the construction industry.

The Construction Industry Threshold: The 1-Employee Rule

Unlike non-construction businesses (which require 4 or more employees before mandatory coverage applies), construction industry employers (which explicitly includes roofing under Class Code 5551) are required to carry Workers' Compensation insurance if they employ ONE (1) or more individuals .

Who Counts as an Employee : Full-time employees, part-time employees, seasonal laborers, out-of-state workers working in Florida, and corporate officers or LLC members (unless legally exempted).

3. Corporate Officer Exemptions (Form DWC-250) & Compliance Penalties

Florida law permits corporate officers and LLC members operating in the construction industry to opt out of workers' compensation coverage under specific conditions.

Construction Exemption Criteria (F.S. § 440.02):

Maximum Officer Count : A maximum of THREE (3) corporate officers per corporation (or LLC members) may file for exemption across all affiliated construction entities.

Ownership Requirement : Each officer or LLC member filing for exemption must hold at least 10% stock ownership (or 10% ownership interest in an LLC) as recorded on filing documents with the Florida Department of State (Sunbiz).

Application Form : Must electronically file Form DWC-250 (Notice of Election to be Exempt) with the Florida Division of Workers' Compensation.

Validity Window : Exemptions are valid for 2 years and must be renewed prior to expiration. There is a nominal $50 filing fee per officer.

Exemption Effect : An exempt officer is excluded from receiving workers' compensation medical or wage benefits if injured on the jobsite and cannot be included in payroll audits.

Division Enforcement & Stop-Work Orders (F.S. § 440.107)

The Florida Division of Workers' Compensation actively conducts unannounced jobsite inspections across Florida. If a roofing contractor operates without required workers' comp insurance or uses un-exempt subcontractors:

Stop-Work Order (SWO) : Immediate cessation of all business operations on all Florida jobsites.

Financial Penalty Calculation : Penalty equals 2 times the amount the employer would have paid in workers' compensation premiums during the period of non-compliance over the prior two years, OR $1,000 , whichever is greater.

Criminal Charges : Under-reporting payroll or misrepresenting worker job duties to evade workers' comp premiums constitutes a third-degree felony .

4. Experience Modification Rate (EMR) & Premium Calculations

Workers' Compensation insurance premiums for roofing contractors are calculated based on gross payroll, trade risk class code rates set by NCCI (National Council on Compensation Insurance), and the contractor's safety record reflected in their EMR.

EMR Mechanics & Baseline

Baseline EMR : 1.00 (represents an average industry safety record).

Discounted Rate (EMR < 1.00) : A contractor with superior safety performance receives a rating such as 0.75 , resulting in a 25% credit discount on insurance premiums.

Surcharged Rate (EMR > 1.00) : A contractor with frequent accidents receives a rating such as 1.35 , resulting in a 35% surcharge penalty .

Mathematical Calculation of Workers' Comp Premium: Base Premium = ( Gross Roofing Payroll $ 100 ) × Manual Rate × EMR \text{Base Premium} = \left( \frac{\text{Gross Roofing Payroll}}{\$100} \right) \times \text{Manual Rate} \times \text{EMR} Base Premium = ( $100 Gross Roofing Payroll ​ ) × Manual Rate × EMR

Example : A contractor has $500,000 in roofer payroll. The manual rate for Class Code 5551 (Roofing) is $18.00 per $100. If the contractor's EMR is 0.75: Base Premium = ( $ 500 , 000 100 ) × $ 18.00 × 0.75 = 5 , 000 × $ 18.00 × 0.75 = $ 67 , 500 \text{Base Premium} = \left( \frac{\$500,000}{100} \right) \times \$18.00 \times 0.75 = 5,000 \times \$18.00 \times 0.75 = \mathbf{\$67,500} Base Premium = ( 100 $500 , 000 ​ ) × $18.00 × 0.75 = 5 , 000 × $18.00 × 0.75 = $67 , 500

Impact of Claims Frequency vs. Severity : NCCI's EMR formula heavily penalizes claim frequency (multiple small injury claims) more severely than a single large catastrophic claim, because frequent claims indicate systemic breakdown in contractor jobsite safety procedures.