Study guide
2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards
Florida Water/Wastewater Operator Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & FDEP Certification Framework
1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs
2 Florida Regulations & Water Law
2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules
3 Source Water & Florida Hydrogeology
3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts
4 Coagulation, Flocculation & Sedimentation
4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation
5 Filtration & Membrane Processes
5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)
6 Softening, Iron/Manganese & Taste/Odor Control
6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration
7 Disinfection & Disinfectant Byproducts
7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance
8 Corrosion Control & Chemical Treatment
8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling
9 Wastewater Collection, Preliminary & Primary Treatment
9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings
10 Secondary Treatment & Activated Sludge
10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons
11 Nutrient Removal, AWT & Reuse
11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice
12 Solids Handling & Biosolids
12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics
13 Distribution Systems & Hydraulics
13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair
14 Cross-Connection, Storage & Distribution Water Quality
14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management
15 Laboratory Testing & Sampling
15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC
16 Operator Math
16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower
17 Safety, Security & Emergency Preparedness
17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)
18 Equipment, O&M & Administration
18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties
2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards
Key Takeaways Explain This Topic AI
FAC 62-600 establishes requirements for domestic wastewater facilities, including design, construction, operation, maintenance, and monitoring expectations operators must support.
Florida wastewater discharges operate under state permits that implement Clean Water Act NPDES concepts; unauthorized discharge is not excused by good intentions.
Florida's famous Advanced Wastewater Treatment (AWT) annual-average targets are remembered as 5-5-3-1: CBOD5 5 mg/L, TSS 5 mg/L, total nitrogen 3 mg/L, total phosphorus 1 mg/L.
AWT is required or expected where sensitive waters, springs protection, reuse pathways, or permit conditions demand higher-than-secondary effluent quality.
Operators meet AWT limits through process control (carbonaceous removal, solids capture, biological nutrient removal or chemical P removal), valid sampling, and honest reporting—not by averaging only the good days.
Last updated: August 2026
2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards
Wastewater operators in Florida live in FAC Chapter 62-600 and its neighboring permit and monitoring chapters. If drinking-water operators memorize MCLs, wastewater operators memorize permit limits , secondary treatment expectations , and—especially in Florida— Advanced Wastewater Treatment (AWT) numbers that protect springs, estuaries, and reuse programs.
1. What FAC 62-600 Covers
FAC 62-600 sets requirements for domestic wastewater facilities : design, construction, operation, maintenance, and monitoring themes that define how plants are supposed to run. The OCP handbook groups domestic wastewater program rules as including:
- Chapter Typical focus
- 62-600 Domestic wastewater facilities (core O&M / facility rule)
- 62-601 Domestic wastewater monitoring-related requirements
- 62-620 Wastewater facility permitting
- 62-640 Biosolids / residuals program concepts
- 62-610 Reclaimed water (reuse) when effluent is beneficially reused
- 62-699 Staffing requirements
Exam cue: when a question asks which rule governs domestic wastewater facility operation and discharge at the chapter level, 62-600 is the headline answer. Reuse details shift to 62-610 ; operator licensing stays in 62-602 .
Recent rule attention also includes operational contingency expectations such as power outage contingency planning for collection/transmission systems (for example concepts associated with 62-600.705 in practice materials)—Florida's SSO and hurricane reality made written contingency planning part of modern compliance, not optional best practice.
2. NPDES and State Permits — Concept Level
The federal Clean Water Act prohibits point-source discharge of pollutants to waters of the United States without a permit under the National Pollutant Discharge Elimination System (NPDES) . States may administer NPDES programs when EPA approves them. Florida implements wastewater discharge control through state-issued permits that carry numeric limits, monitoring frequencies, narrative conditions, and reporting duties.
What operators must internalize:
No permit, no discharge authority. Informal permission from a city manager is not a substitute for a DEP permit.
The permit is a contract with numbers. CBOD5, TSS, nutrients, bacteria, pH, chlorine residual (or dechlorination), flow, and toxicity conditions are enforceable.
Land application, reuse, and deep-well injection are still regulated pathways—moving effluent off a surface outfall does not make the plant "unpermitted territory."
Bypasses and SSOs are reportable compliance events, not hidden maintenance tricks.
DMRs and monthly operating reports must match laboratory reality. Creative spreadsheet averaging that hides excursions is a career-ending idea.
Permitting mechanics live largely in 62-620 and related program rules, but day-to-day process decisions that determine whether permit numbers are met live in the operator's hands under 62-600 expectations.
- 3. From Secondary Treatment to Florida AWT
- Secondary treatment baseline (conceptual)
Conventional secondary treatment focuses on removing organic oxygen demand and suspended solids with biological processes (activated sludge, fixed film, lagoons) plus clarification. Classic federal secondary reference points students meet early are on the order of 30 mg/L CBOD5 and 30 mg/L TSS (or 85% removal), depending on the permit construct. Many Florida plants must do better than bare secondary because of receiving-water sensitivity .
Advanced Wastewater Treatment (AWT) — the Florida signature
Florida is famous in operator culture for AWT limits remembered as 5-5-3-1 on an annual average basis:
- Parameter AWT annual-average limit Why it matters
- CBOD5 5 mg/L Residual carbonaceous oxygen demand after advanced treatment
- TSS 5 mg/L Solids control; also supports disinfection and reuse turbidity goals
- Total nitrogen (TN) 3 mg/L Protects springs, estuaries, and nitrogen-limited waters
- Total phosphorus (TP) 1 mg/L Controls algal blooms in phosphorus-sensitive systems
Memorize the order: CBOD5 – TSS – TN – TP → 5 – 5 – 3 – 1 . Exam writers love to shuffle the numbers or swap nitrogen and phosphorus.
AWT is not "secondary plus a sand filter nickname." Achieving 5-5-3-1 typically requires a combination of:
- Reliable carbonaceous BOD removal
- Excellent solids capture (secondary clarifiers + filtration is common)
- Biological nutrient removal (nitrification/denitrification for nitrogen) and/or other N-removal processes
- Biological and/or chemical phosphorus removal
- Stable solids handling so the liquid train is not constantly shocked by recycle loads
- Disinfection appropriate to the disposal or reuse pathway
- 4. Where AWT Is Required or Expected
AWT appears when the receiving environment or reuse pathway demands it. High-yield Florida contexts:
Sensitive surface waters and estuaries
Coastal and estuarine systems can be nitrogen- or phosphorus-limited. Discharging secondary-quality effluent into such waters can fuel algal blooms and dissolved-oxygen problems. Permits for plants affecting these waters often embed AWT-level nutrient limits or equivalent wasteload allocations under TMDLs.
Springs and the Florida Springs Protection context
Florida's spring systems are nationally unique and nitrogen-sensitive. Nutrient strategies, TMDLs, and springs protection policies push many contributing wastewater facilities toward advanced nitrogen control. Exam language may reference springs protection and TMDLs as drivers for tighter limits—even when the plant is inland—if groundwater or surface pathways connect to spring sheds.
Reuse pathways
Public-access reclaimed water under 62-610 commonly needs high-level treatment and disinfection. Filtration to low TSS (often discussed around ≤5 mg/L TSS for public-access quality) pairs naturally with AWT-style liquid trains. A plant producing reclaimed water for golf courses, medians, and dual-distribution residential irrigation is not aiming for 30/30 secondary aesthetics.
Permit-specific and waterbody-specific conditions
Not every small package plant in Florida is literally labeled "AWT facility," but many permits are more stringent than generic secondary . Always read the permit: the governing numbers are the ones on the authorization, which may be AWT, technology-based, or water-quality-based limits derived from TMDLs.
5. Operator Role in Meeting AWT and Permit Limits
Technology alone does not maintain 5-5-3-1. Operators do.
Process control
Maintain adequate SRT/MLSS for nitrification when TN limits apply.
Ensure anoxic zones and carbon availability support denitrification.
Control chemical feed for phosphorus removal without overdosing solids.
Protect clarifiers from solids washout during peak flows and storms.
Keep filters online; a filter outage can destroy TSS and downstream disinfection performance.
Manage sidestreams from digesters and dewatering that return ammonia and phosphorus to the headworks.
Monitoring and honesty
Sample composite vs grab as the permit requires.
Hold to laboratory QA/QC; a bad BOD seed or nitrate method error becomes a false permit story.
Understand annual average vs monthly average vs daily maximum statistics. AWT's classic 5-5-3-1 teaching set is annual-average oriented—operators still must avoid monthly spikes that violate other permit lines.
Reporting and contingencies
File required reports on time.
Document upsets, power losses, and SSO-related events according to rule and permit.
Train relief operators; AWT plants fail when only one person understands the BNR zones.
6. How 62-600 Interacts with Reuse and Biosolids
Effluent that meets advanced limits may still need additional 62-610 controls before public-access irrigation (high-level disinfection, dual-distribution safeguards, signage). Solids removed to achieve low TSS become biosolids regulated under residual rules (62-640 themes): stabilization, pathogen reduction, vector attraction reduction, and land-application limits. Liquid-train success that creates unmanageable solids handling is not real compliance—it is a problem deferred one process unit downstream.
- 7. Exam Drills for Section 2.3
- Chapter ID: domestic wastewater facility rule → 62-600
- AWT mnemonic: 5-5-3-1 = CBOD5-TSS-TN-TP (mg/L, annual average teaching standard)
- Drivers: sensitive waters, springs/TMDLs, reuse quality, permit conditions
- Operator job: process control + valid data + permit reporting
Do not confuse: 62-600 (wastewater facilities) vs 62-550 (drinking-water standards) vs 62-610 (reuse) vs 62-602 (licenses)
If you can explain why Florida insists on 3 mg/L TN and 1 mg/L TP in many advanced permits—nutrient pollution of springs and estuaries—you understand the policy purpose behind the numbers, not just the flashcard.