Study guide
11.2 Florida AWT 5-5-3-1 Standards
Florida Water/Wastewater Operator Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & FDEP Certification Framework
1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs
2 Florida Regulations & Water Law
2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules
3 Source Water & Florida Hydrogeology
3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts
4 Coagulation, Flocculation & Sedimentation
4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation
5 Filtration & Membrane Processes
5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)
6 Softening, Iron/Manganese & Taste/Odor Control
6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration
7 Disinfection & Disinfectant Byproducts
7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance
8 Corrosion Control & Chemical Treatment
8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling
9 Wastewater Collection, Preliminary & Primary Treatment
9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings
10 Secondary Treatment & Activated Sludge
10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons
11 Nutrient Removal, AWT & Reuse
11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice
12 Solids Handling & Biosolids
12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics
13 Distribution Systems & Hydraulics
13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair
14 Cross-Connection, Storage & Distribution Water Quality
14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management
15 Laboratory Testing & Sampling
15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC
16 Operator Math
16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower
17 Safety, Security & Emergency Preparedness
17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)
18 Equipment, O&M & Administration
18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties
11.2 Florida AWT 5-5-3-1 Standards
Key Takeaways Explain This Topic AI
Florida AWT annual-average teaching limits are CBOD₅ 5 mg/L, TSS 5 mg/L, total nitrogen 3 mg/L, and total phosphorus 1 mg/L—remembered as 5-5-3-1.
AWT protects springs, estuaries, and other nutrient-sensitive Florida waters from wastewater-driven algal growth and related harm.
AWT is far tighter than classic secondary ~30/30 CBOD₅/TSS thinking and adds strict nitrogen and phosphorus endpoints.
Meeting 5-5-3-1 requires stable carbonaceous treatment, excellent solids capture (often filtration), BNR for N, and bio-P and/or chemical P removal.
Low ammonia with high TN usually means denitrification failure; rising TP often means anaerobic zone or recycle P-release problems plus need for chemical polish.
Last updated: August 2026
11.2 Florida AWT 5-5-3-1 Standards
Quick Answer: Florida Advanced Wastewater Treatment (AWT) is memorized as 5-5-3-1 on an annual average basis: CBOD₅ 5 mg/L , TSS 5 mg/L , Total Nitrogen 3 mg/L , Total Phosphorus 1 mg/L . These limits protect springs, estuaries, and other sensitive waters and are far tighter than classic secondary ~30/30 thinking. Operators meet AWT with stable BNR , excellent solids capture (often filtration), and disciplined monitoring—not by renaming secondary effluent “advanced.”
Florida operator exams treat AWT as signature state knowledge. If you remember only one numeric string from wastewater regulation, make it 5-5-3-1 in the correct parameter order. Chapter 2 introduced the rule neighborhood (FAC 62-600 and permits). This section is about what the numbers mean operationally and how they differ from secondary treatment.
1. The 5-5-3-1 Memory Frame
- Order Parameter AWT annual-average teaching limit Operator meaning
- 1 CBOD₅ 5 mg/L Residual carbonaceous oxygen demand after advanced treatment
- 2 TSS 5 mg/L Suspended solids; also gates disinfection and reuse clarity goals
- 3 Total nitrogen (TN) 3 mg/L Nitrogen control for springs/estuaries—needs nitrification + denitrification
- 4 Total phosphorus (TP) 1 mg/L Phosphorus control—bio-P and/or chemical precipitation
Mnemonic: Carbon – Solids – Nitrogen – Phosphorus → 5 – 5 – 3 – 1.
Exam writers commonly:
Swap nitrogen and phosphorus numbers (3 vs 1).
Ask whether limits are daily maximums vs annual averages (Florida AWT framing on exams emphasizes annual average targets).
Pair AWT with why Florida (sensitive receiving waters) rather than “because secondary is illegal everywhere.”
Always read the actual permit: individual facilities may have additional limits, different averaging periods for some parameters, pathogen limits, chlorine residual/dechlorination, pH, flow, and toxicity conditions. The 5-5-3-1 set is the cultural and exam core for AWT.
2. Why Florida Requires AWT
Florida’s hydrology and economy create unusual nutrient sensitivity:
Driver Why AWT appears
Springs and clear groundwater-fed systems Excess nitrate fuels algal growth, reduces clarity, and harms spring ecosystems that define regions of the state
Lakes and freshwater systems Phosphorus (and sometimes nitrogen) drives eutrophication and harmful algal blooms
Estuaries and coastal waters Nutrient loads contribute to seagrass loss, hypoxia, and bloom problems that affect fisheries and tourism
Population + wastewater volume Large treated flows mean even “pretty good” secondary effluent can still deliver huge nutrient mass loads
Reuse and disposal constraints High-quality effluent supports reclaimed water programs and tighter disposal pathways
AWT is therefore not a vanity standard. It is a mass-load and concentration strategy to keep treated wastewater from fertilizing the waters Florida is famous for protecting. Operators who understand the “why” answer scenario questions better: a plant near a spring-fed system failing TN is not a paperwork issue—it is an environmental protection failure.
3. Secondary Treatment vs AWT (Comparison Table)
Classic secondary treatment focuses on removing biodegradable organics and suspended solids with biological processes and clarification. A common teaching benchmark students meet early is on the order of 30 mg/L CBOD₅ and 30 mg/L TSS (or percent-removal constructs), depending on federal/state permit framing. Nutrients may remain high.
- Feature Secondary (conceptual baseline) Florida AWT (5-5-3-1 teaching frame)
- CBOD₅ ~30 mg/L class thinking 5 mg/L annual average
- TSS ~30 mg/L class thinking 5 mg/L annual average
- Total nitrogen Often not driven to single-digit lows 3 mg/L annual average
- Total phosphorus Often not tightly limited 1 mg/L annual average
Process needs Carbonaceous BOD removal + clarification Secondary performance plus nutrient removal, usually filtration, tight process control
Typical monitoring emphasis CBOD₅, TSS, bacteria, flow All of secondary plus NH₃-N, NOₓ/TN, TP, ORP/DO by zone
Key teaching point: Dropping from 30 to 5 mg/L CBOD₅/TSS is already a large step; adding TN 3 and TP 1 forces BNR design and operator skill . A plant can meet secondary BOD/TSS and still fail AWT on nutrients every month.
4. What It Takes Process-Wise to Hit 5-5-3-1
Meeting AWT is a system result:
Carbonaceous removal — stable activated sludge or equivalent so CBOD₅ stays low even with recycle loads.
Solids capture — secondary clarifiers performing well; many AWT plants add filtration (sand, cloth, or other) to hold TSS near 5 mg/L and protect disinfection/reuse.
Nitrogen removal — reliable nitrification (low NH₃-N) plus denitrification (low NOₓ) so TN approaches 3 mg/L.
Phosphorus removal — EBPR and/or chemical precipitation to hold TP near 1 mg/L.
Solids handling discipline — digester/thickener recycles can return ammonia and phosphate bombs that destroy liquid-train compliance.
Disinfection train that matches the disposal or reuse pathway (separate rules, but solids and residual organics affect CT and byproducts).
Operator implications for process control
- If this drifts… AWT parameter at risk First-line operator checks
- Low aerobic DO or short SRT NH₃-N up → TN fails Aeration, blower capacity, MLSS/SRT, toxicity
Anoxic zone aerated or carbon-starved NOₓ high → TN fails Mixers vs aerators, recycle rates, supplemental carbon
Anaerobic zone contaminated with nitrate/DO Bio-P fails → TP up Zone integrity, recycle nitrate, chemical P backup
Clarifier solids washout TSS and often CBOD₅ , TP particulate SVI/blanket, RAS, hydraulic overload, filament control
- Filter blinding or bypass TSS , disinfection, reuse turbidity Backwash, media condition, bypass status
- Alkalinity collapse Nitrification loss → TN Alkalinity, pH, caustic/lime feed
- Wet-weather I/I dilution + short SRT risk Multiple parameters Flow management, step feed, inventory protection
AWT compliance is often judged on averages . That tempts operators to “make up” a bad week later. Professionally and legally, the goal is stable daily control so the annual average is never a last-minute scramble. DMRs and operating reports must reflect real laboratory results.
5. Permit Reality Beyond the Four Numbers
Even when 5-5-3-1 is the nutrient/solids headline, permits typically also address:
Fecal coliform or other pathogen indicators (and different rules for reuse under 62-610 ).
Chlorine residual and dechlorination for surface discharge.
pH range.
Flow and sometimes loading caps.
Toxicity testing for some surface discharges.
Ground water monitoring for land application or recharge systems.
Bypass, SSO, and unauthorized discharge prohibitions.
AWT does not replace those conditions. It tightens the oxygen-demand and nutrient core that Florida prioritizes for sensitive waters.
6. How Exam Questions Usually Frame AWT
Expect items such as:
“What are Florida’s AWT annual-average limits?” → 5, 5, 3, 1 for CBOD₅, TSS, TN, TP.
“Which parameter is 3 mg/L?” → Total nitrogen (not phosphorus).
“Why does Florida emphasize AWT?” → protect springs / sensitive surface waters / estuaries .
“Secondary effluent NH₃ is low but TN is 12 mg/L—what is missing?” → denitrification (nitrate still present).
“TP is 2.5 mg/L with good bio-P design—what backup exists?” → chemical precipitation .
Connect AWT numbers to Chapter 11.1 process tools and to Chapter 11.3–11.4 disposal/reuse choices: the same high-quality effluent may be discharged, injected, land-applied, or reused—but the treatment reliability still has to be real.
Exam Bottom Line
Memorize AWT = 5-5-3-1 annual average (CBOD₅–TSS–TN–TP) . Know it is stricter than secondary ~30/30 thinking, exists to protect Florida’s springs and sensitive waters , and requires BNR + solids control (+ often filtration and chemical P) . Operator excellence is daily process control of nitrogen and phosphorus pathways—not hope that monthly averages will forgive neglect.