Study guide

16.2 Dosage, Chemical Feed & Detention Time

Florida Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & FDEP Certification Framework

1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs

2 Florida Regulations & Water Law

2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules

3 Source Water & Florida Hydrogeology

3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts

4 Coagulation, Flocculation & Sedimentation

4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation

5 Filtration & Membrane Processes

5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)

6 Softening, Iron/Manganese & Taste/Odor Control

6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration

7 Disinfection & Disinfectant Byproducts

7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance

8 Corrosion Control & Chemical Treatment

8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling

9 Wastewater Collection, Preliminary & Primary Treatment

9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings

10 Secondary Treatment & Activated Sludge

10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons

11 Nutrient Removal, AWT & Reuse

11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice

12 Solids Handling & Biosolids

12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics

13 Distribution Systems & Hydraulics

13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair

14 Cross-Connection, Storage & Distribution Water Quality

14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management

15 Laboratory Testing & Sampling

15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC

16 Operator Math

16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower

17 Safety, Security & Emergency Preparedness

17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

18 Equipment, O&M & Administration

18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties

16.2 Dosage, Chemical Feed & Detention Time

Key Takeaways Explain This Topic AI

Chemical feed lb/day = MGD × mg/L × 8.34; convert gpm to MGD before using the formula.

Liquid feed: divide pure lb/day by decimal percent (and 8.34 × S.G.) to get gpd of product.

Detention time t = V/Q with consistent units—gal/gpm → minutes; MG/MGD → days.

Pump calibration drawdown: volume from geometry × 7.48, then divide by elapsed minutes for gpm.

Chlorine story: dose supports demand plus residual; always sanity-check lb/day against plant size.

Last updated: August 2026

16.2 Dosage, Chemical Feed & Detention Time

Quick Answer: Chemical feed in lb/day uses MGD × mg/L × 8.34 . Liquid feed from a percent solution converts pure chemical mass to gpd of product . Detention time is volume ÷ flow with consistent units. Pump calibration by drawdown measures actual feed or flow from a drop in a calibration cylinder or tank over a timed interval.

Process control is quantitative: chlorine residual targets, coagulant doses, polymer feeds, and basin contact times all reduce to a few repeatable setups. Master them cold for Florida Class C and distribution exams.

1. The Pounds Formula (Dosage / Feed Rate) Feed rate (lb/day) = Q ( MGD ) × Dose (mg/L) × 8.34 \text{Feed rate (lb/day)} = Q\ (\text{MGD}) \times \text{Dose (mg/L)} \times 8.34 Feed rate (lb/day) = Q ( MGD ) × Dose (mg/L) × 8.34

  • Symbol Meaning Notes
  • (Q) Flow Must be MGD , not gpm
  • Dose Applied concentration mg/L of chemical (or “as” a specified basis)
  • 8.34 lb per gallon of water Links mg/L in 1 MG to pounds
  • Result Mass per day Often chemical feed pump setpoint basis

Demand vs dose vs residual (chlorine story): Dose ≈ Demand + Residual \text{Dose} \approx \text{Demand} + \text{Residual} Dose ≈ Demand + Residual

If demand is 1.2 mg/L and residual target is 1.0 mg/L, applied dose ≈ 2.2 mg/L (idealized; real systems include losses and mixing).

Worked Example 1 — Chlorine Gas Feed (lb/day)

Plant flow 2.5 MGD . Operator applies 2.0 mg/L free chlorine dose. lb/day = 2.5 × 2.0 × 8.34 = 41.7 lb/day \text{lb/day} = 2.5 \times 2.0 \times 8.34 = 41.7\ \text{lb/day} lb/day = 2.5 × 2.0 × 8.34 = 41.7 lb/day

Interpretation: About 42 lb/day chlorine gas (or equivalent available chlorine) must be fed at that flow and dose. If flow doubles and dose stays the same, feed doubles.

Worked Example 2 — Find Required Dose from Feed Rate

A chlorinator is set to 25 lb/day . Flow is 1.2 MGD . What dose (mg/L) is being applied?

Rearrange: mg/L = lb/day Q × 8.34 = 25 1.2 × 8.34 = 25 10.008 ≈ 2.5 mg/L \text{mg/L} = \frac{\text{lb/day}}{Q \times 8.34} = \frac{25}{1.2 \times 8.34} = \frac{25}{10.008} \approx 2.5\ \text{mg/L} mg/L = Q × 8.34 lb/day ​ = 1.2 × 8.34 25 ​ = 10.008 25 ​ ≈ 2.5 mg/L

Worked Example 3 — Convert gpm Then Dose

Flow meter reads 800 gpm . Desired alum dose is 15 mg/L . Find lb/day.

Step 1 — MGD 800 × 0.00144 = 1.152 MGD 800 \times 0.00144 = 1.152\ \text{MGD} 800 × 0.00144 = 1.152 MGD

Step 2 — Pounds 1.152 × 15 × 8.34 = 1.152 × 125.1 ≈ 144.1 lb/day 1.152 \times 15 \times 8.34 = 1.152 \times 125.1 \approx 144.1\ \text{lb/day} 1.152 × 15 × 8.34 = 1.152 × 125.1 ≈ 144.1 lb/day

2. Liquid Chemical Feed from Percent Strength

When the chemical is supplied as a solution or slurry of known percent by weight , first find pure chemical lb/day, then convert to solution lb/day and gpd . lb/day pure = Q × mg/L × 8.34 \text{lb/day pure} = Q \times \text{mg/L} \times 8.34 lb/day pure = Q × mg/L × 8.34 lb/day solution = lb/day pure decimal percent \text{lb/day solution} = \frac{\text{lb/day pure}}{\text{decimal percent}} lb/day solution = decimal percent lb/day pure ​ gpd solution ≈ lb/day solution 8.34 \text{gpd solution} \approx \frac{\text{lb/day solution}}{8.34} gpd solution ≈ 8.34 lb/day solution ​

(Assumes solution density ≈ water; for dense chemicals some exams give specific gravity—then multiply 8.34 by S.G.)

With specific gravity: gpd = lb/day solution 8.34 × S.G. \text{gpd} = \frac{\text{lb/day solution}}{8.34 \times \text{S.G.}} gpd = 8.34 × S.G. lb/day solution ​

Worked Example 4 — Hypochlorite Feed

Need 40 lb/day available chlorine. Product is 12% available chlorine, S.G. ≈ 1.0 for estimate. lb/day solution = 40 / 0.12 = 333.3 lb/day \text{lb/day solution} = 40 / 0.12 = 333.3\ \text{lb/day} lb/day solution = 40/0.12 = 333.3 lb/day gpd = 333.3 / 8.34 ≈ 40.0 gpd \text{gpd} = 333.3 / 8.34 \approx 40.0\ \text{gpd} gpd = 333.3/8.34 ≈ 40.0 gpd

Cross-check: At 12%, each gallon (~8.34 lb) carries 0.12 × 8.34 ≈ 1.0 0.12 \times 8.34 ≈ 1.0 0.12 × 8.34 ≈ 1.0 lb available Cl₂, so 40 lb/day needs ~40 gpd—clean mental check.

Worked Example 5 — Polymer or Coagulant Percent Solution

Feed 12 lb/day active polymer from a 0.5% solution (S.G. = 1.0). lb/day solution = 12 / 0.005 = 2,400 lb/day \text{lb/day solution} = 12 / 0.005 = 2{,}400\ \text{lb/day} lb/day solution = 12/0.005 = 2 , 400 lb/day gpd = 2,400 / 8.34 ≈ 288 gpd \text{gpd} = 2{,}400 / 8.34 \approx 288\ \text{gpd} gpd = 2 , 400/8.34 ≈ 288 gpd

Weak solutions require large volumetric feeds —a common exam surprise.

3. Detention Time (Hydraulic Retention) t = V Q t = \frac{V}{Q} t = Q V ​

  • If volume is… And flow is… Time unit
  • gallons gpm minutes ((V/Q))
  • gallons gpd days
  • MG MGD days
  • ft³ cfs seconds

Minutes is the most common operator unit for basins and contact tanks: t min = V gal Q gpm t_{\text{min}} = \frac{V_{\text{gal}}}{Q_{\text{gpm}}} t min ​ = Q gpm ​ V gal ​ ​

Or: t min = V gal × 1,440 Q gpd or t hr = V gal Q gph t_{\text{min}} = \frac{V_{\text{gal}} \times 1{,}440}{Q_{\text{gpd}}}\quad\text{or}\quad t_{\text{hr}} = \frac{V_{\text{gal}}}{Q_{\text{gph}}} t min ​ = Q gpd ​ V gal ​ × 1 , 440 ​ or t hr ​ = Q gph ​ V gal ​ ​

Worked Example 6 — Tank Detention Time

Tank volume 50,000 gal . Flow 250 gpm . t = 50,000 / 250 = 200 minutes ≈ 3.33 hours t = 50{,}000 / 250 = 200\ \text{minutes} \approx 3.33\ \text{hours} t = 50 , 000/250 = 200 minutes ≈ 3.33 hours

Worked Example 7 — Volume Needed for a Target DT

Want 30 minutes detention at 1,200 gpm . V = t × Q = 30 × 1,200 = 36,000 gal V = t \times Q = 30 \times 1{,}200 = 36{,}000\ \text{gal} V = t × Q = 30 × 1 , 200 = 36 , 000 gal

Worked Example 8 — Chlorine Contact Using MG and MGD

Clearwell 0.25 MG , flow 2.0 MGD . t days = 0.25 / 2.0 = 0.125 day t_{\text{days}} = 0.25 / 2.0 = 0.125\ \text{day} t days ​ = 0.25/2.0 = 0.125 day t minutes = 0.125 × 1,440 = 180 minutes t_{\text{minutes}} = 0.125 \times 1{,}440 = 180\ \text{minutes} t minutes ​ = 0.125 × 1 , 440 = 180 minutes

CT link (concept): If residual C = 1.0 mg/L and theoretical T = 180 min, raw CT = 180 mg·min/L before baffling factors (see disinfection chapter for effective T).

4. Pump Calibration — Drawdown Math

Chemical feed pumps and plant flow meters are verified by timed volume change in a calibration column or tank. Q = Volume pumped Time Q = \frac{\text{Volume pumped}}{\text{Time}} Q = Time Volume pumped ​

Cylinder method (mL and minutes → mL/min or gpd):

If level drops Δ h \Delta h Δ h in a cylinder of known area, volume = area × drop.

Worked Example 9 — Calibration Column

A calibration cylinder has cross-section such that 100 mL corresponds to a marked interval. Pump draws 250 mL in 2.0 minutes . Feed = 250 mL / 2.0 min = 125 mL/min \text{Feed} = 250\ \text{mL} / 2.0\ \text{min} = 125\ \text{mL/min} Feed = 250 mL /2.0 min = 125 mL/min

Convert to gpd if needed: 125 mL/min × 1,440 min/day = 180,000 mL/day 125\ \text{mL/min} \times 1{,}440\ \text{min/day} = 180{,}000\ \text{mL/day} 125 mL/min × 1 , 440 min/day = 180 , 000 mL/day . Since 3,785 mL ≈ 1 gal, gpd ≈ 180,000 / 3,785 ≈ 47.6 180{,}000 / 3{,}785 ≈ 47.6 180 , 000/3 , 785 ≈ 47.6 gpd.

Worked Example 10 — Wet Well or Tank Drop → gpm

A cylindrical wet well, D = 6 ft , water level drops 1.5 ft in 4 minutes with inflow isolated (pumping only).

Volume dropped (ft³): V = 0.785 × 6 2 × 1.5 = 0.785 × 36 × 1.5 = 42.39 ft 3 V = 0.785 \times 6^2 \times 1.5 = 0.785 \times 36 \times 1.5 = 42.39\ \text{ft}^3 V = 0.785 × 6 2 × 1.5 = 0.785 × 36 × 1.5 = 42.39 ft 3

Gallons: V = 42.39 × 7.48 ≈ 317 gal V = 42.39 \times 7.48 \approx 317\ \text{gal} V = 42.39 × 7.48 ≈ 317 gal

gpm: Q = 317 gal / 4 min ≈ 79 gpm Q = 317\ \text{gal} / 4\ \text{min} \approx 79\ \text{gpm} Q = 317 gal /4 min ≈ 79 gpm

This is the same skill used for pump capacity checks and some inflow estimates .

5. Putting Dosage and Detention Together

  • Task Formula backbone
  • Chlorine lb/day MGD × mg/L × 8.34
  • Hypochlorite gpd lb/day pure ÷ (decimal % × 8.34 × S.G.)
  • Basin DT V/Q with matching units
  • Feed pump check Volume / time (drawdown)
  • Dose from known feed lb/day ÷ (MGD × 8.34)
  • Worked Example 11 — Mini Plant Scenario

Flow 1.5 MGD . Chlorine dose 1.8 mg/L . Contact basin 90,000 gal .

Feed: 1.5 × 1.8 × 8.34 = 22.5 lb/day approximately? 1.5 \times 1.8 \times 8.34 = 22.5\ \text{lb/day approximately?} 1.5 × 1.8 × 8.34 = 22.5 lb/day approximately?

Exactly: 1.5 × 1.8 = 2.7 1.5 \times 1.8 = 2.7 1.5 × 1.8 = 2.7 ; 2.7 × 8.34 = 22.518 ≈ 22.5 2.7 \times 8.34 = 22.518 ≈ 22.5 2.7 × 8.34 = 22.518 ≈ 22.5 lb/day.

Detention (minutes): First gpm = 1.5 / 0.00144 = 1,041.7 1.5 / 0.00144 = 1{,}041.7 1.5/0.00144 = 1 , 041.7 gpm. t = 90,000 / 1,041.7 ≈ 86.4 minutes t = 90{,}000 / 1{,}041.7 \approx 86.4\ \text{minutes} t = 90 , 000/1 , 041.7 ≈ 86.4 minutes

Or using days: (V = 0.09) MG; (t = 0.09/1.5 = 0.06) day × 1440 = 86.4 minutes .

6. Exam Habits for Feed & DT Items

Underline the flow unit (gpm vs MGD) before writing the pounds formula.

Percent → decimal (12% → 0.12), never leave “12” in the denominator.

For DT, convert everything to gal and gpm or MG and MGD —do not mix.

Drawdown problems need geometry first , then ÷ time.

If choices are close, recompute with full precision and check S.G. note in the stem.

Florida exams reward operators who treat chemical feed as a mass balance , not a “set the dial and hope” skill. Calibration proves the pump delivers the calculated gpd.