Study guide
16.1 Math Fundamentals, Conversions & Formula Sheets
Florida Water/Wastewater Operator Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & FDEP Certification Framework
1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs
2 Florida Regulations & Water Law
2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules
3 Source Water & Florida Hydrogeology
3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts
4 Coagulation, Flocculation & Sedimentation
4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation
5 Filtration & Membrane Processes
5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)
6 Softening, Iron/Manganese & Taste/Odor Control
6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration
7 Disinfection & Disinfectant Byproducts
7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance
8 Corrosion Control & Chemical Treatment
8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling
9 Wastewater Collection, Preliminary & Primary Treatment
9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings
10 Secondary Treatment & Activated Sludge
10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons
11 Nutrient Removal, AWT & Reuse
11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice
12 Solids Handling & Biosolids
12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics
13 Distribution Systems & Hydraulics
13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair
14 Cross-Connection, Storage & Distribution Water Quality
14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management
15 Laboratory Testing & Sampling
15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC
16 Operator Math
16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower
17 Safety, Security & Emergency Preparedness
17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)
18 Equipment, O&M & Administration
18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties
16.1 Math Fundamentals, Conversions & Formula Sheets
Key Takeaways Explain This Topic AI
Core constants: 7.48 gal/ft³, 8.34 lb/gal, mg/L ≈ ppm in dilute water, and 1% ≈ 10,000 mg/L for solutions.
Area and volume use L×W, 0.785 D², and 0.785 D² H (cone × 1/3); always use liquid depth, not empty tank height.
FDEP provides formula sheets at the exam—study them beforehand so you only look up symbols under time pressure.
Convert gpm ↔ MGD (× 0.00144) and gal ↔ MG before using the pounds formula.
Common traps: diameter vs radius, 7.48 vs 8.34, MG vs gal, and premature rounding.
Last updated: August 2026
16.1 Math Fundamentals, Conversions & Formula Sheets
Quick Answer: Operator math rests on a small set of unit conversions , area/volume formulas , and density constants used every day: 7.48 gal/ft³ , 8.34 lb/gal , and mg/L ≈ ppm in dilute water. FDEP provides formula sheets at the exam —study them in advance so you recognize every symbol and do not waste clock time re-deriving geometry. Master order of operations , cancel units, and watch common traps (diameter vs radius, MG vs gal, wet vs dry basis).
Florida water, wastewater, and distribution exams put heavy weight on calculation items. Class C treatment exams (100 questions, 3 hours) and shorter Class D / distribution exams all draw from the same core toolbox. This section builds the foundation used in dosage, detention, loadings, and pump problems later in the chapter.
1. Why Formula Sheets Matter on the FDEP Exam
FDEP’s Operator Certification Program historically provides formula sheets (and related reference material) at the examination . That does not mean you can skip math practice:
- Reality at the exam What you must still know
- Formulas may be listed Which formula matches the word problem
- Constants may appear When to use 7.48 , 8.34 , π/0.785 , 2.31
- Geometry is given How to plug D vs r , height vs depth of water
- No partial credit One unit error → wrong multiple-choice choice
- Time pressure Setup speed from drilled examples
Study strategy: Print or obtain the current FDEP/PSI formula reference used for water/wastewater exams, work every example in this chapter with that sheet open , and mark the lines you actually use. On test day you should open the sheet only to confirm a constant or recall a rarely used formula—not to learn geometry for the first time.
2. Core Unit Conversions Operators Use Daily
- From To Multiply / divide by Memory hook
- ft³ gallons × 7.48 ~7.5 gal per cubic foot
- gallons ft³ ÷ 7.48 reverse of above
- MG (million gallons) gallons × 1,000,000 “million” is literal
- gallons MG ÷ 1,000,000 flow often in MGD
- L (liters) gallons × 0.264 (approx.) or gal × 3.785 → L
- mg/L ppm ≈ 1 : 1 in dilute water mass/mass ≈ mass/volume for H₂O
- lb kg ÷ 2.205 (approx.) metric lab reports
- psi ft of head × 2.31 hydraulics chapter link
- % solution (w/w) mg/L (approx.) × 10,000 1% ≈ 10,000 mg/L
Density anchors (nearly pure water at ordinary temperature):
- 1 gallon of water ≈ 8.34 lb
- 1 ft³ of water ≈ 62.4 lb (because 7.48 × 8.34 ≈ 62.4)
- 1 mg/L in 1 MG of water = 8.34 lb of that substance (basis of the famous “pounds formula”)
- 3. Area Formulas
- Shape Area formula Operator notes
- Rectangle / square A = L × W A = L \times W A = L × W Floor of rectangular tank; weir plan area
Circle A = π r 2 A = \pi r^2 A = π r 2 or A = 0.785 D 2 A = 0.785\,D^2 A = 0.785 D 2 0.785 ≈ π / 4 0.785 \approx \pi/4 0.785 ≈ π /4 ; use diameter if given
Triangle A = 1 2 b h A = \frac{1}{2} b h A = 2 1 bh Occasional weir or wedge problems
Trapezoid A = ( b 1 + b 2 ) 2 × h A = \frac{(b_1 + b_2)}{2} \times h A = 2 ( b 1 + b 2 ) × h Channel cross-section
Trap: If the problem gives diameter , do not square the radius by mistake without converting. If it gives radius , do not use 0.785 D 2 0.785 D^2 0.785 D 2 with (D = r).
4. Volume Formulas (Tanks)
Tank type Volume (ft³) Then convert to gallons
Rectangular V = L × W × H V = L \times W \times H V = L × W × H V gal = V ft 3 × 7.48 V_{\text{gal}} = V_{\text{ft}^3} \times 7.48 V gal = V ft 3 × 7.48
- Cylindrical (vertical) V = 0.785 D 2 H V = 0.785\,D^2 H V = 0.785 D 2 H Same × 7.48
- Cylindrical (horizontal partial) Special tables / more advanced Often beyond basic setup; watch wording
Cone / conical hopper V = 1 3 × 0.785 D 2 H V = \frac{1}{3} \times 0.785\,D^2 H V = 3 1 × 0.785 D 2 H Digester bottoms, hopper bottoms
Sphere V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 π r 3 Rare; follow formula sheet
Depth of water (H) is the liquid depth , not always the tank wall height. A tank 20 ft tall filled only 12 ft uses (H = 12) ft for volume of water.
Worked Example A — Rectangular Clearwell
A clearwell is 40 ft long × 25 ft wide × 12 ft water depth .
Step 1 — Volume in ft³ V = 40 × 25 × 12 = 12,000 ft 3 V = 40 \times 25 \times 12 = 12{,}000\ \text{ft}^3 V = 40 × 25 × 12 = 12 , 000 ft 3
Step 2 — Convert to gallons V = 12,000 × 7.48 = 89,760 gal V = 12{,}000 \times 7.48 = 89{,}760\ \text{gal} V = 12 , 000 × 7.48 = 89 , 760 gal
Step 3 — Express as MG (if needed for detention later) V = 89,760 / 1,000,000 = 0.08976 MG V = 89{,}760 / 1{,}000{,}000 = 0.08976\ \text{MG} V = 89 , 760/1 , 000 , 000 = 0.08976 MG
Worked Example B — Cylindrical Tank
A vertical cylindrical tank has diameter 30 ft and water depth 18 ft .
Step 1 — Area of base A = 0.785 × D 2 = 0.785 × 30 2 = 0.785 × 900 = 706.5 ft 2 A = 0.785 \times D^2 = 0.785 \times 30^2 = 0.785 \times 900 = 706.5\ \text{ft}^2 A = 0.785 × D 2 = 0.785 × 3 0 2 = 0.785 × 900 = 706.5 ft 2
Step 2 — Volume ft³ V = 706.5 × 18 = 12,717 ft 3 V = 706.5 \times 18 = 12{,}717\ \text{ft}^3 V = 706.5 × 18 = 12 , 717 ft 3
Step 3 — Gallons V = 12,717 × 7.48 ≈ 95,123 gal V = 12{,}717 \times 7.48 \approx 95{,}123\ \text{gal} V = 12 , 717 × 7.48 ≈ 95 , 123 gal
(Using more digits of π \pi π changes the answer slightly; exam choices are usually spaced to allow the 0.785 convention on the formula sheet.)
Worked Example C — Conical Volume
A cone-bottom section has D = 12 ft and cone height H = 9 ft . Volume of the cone only: V = 1 3 × 0.785 × 12 2 × 9 = 1 3 × 0.785 × 144 × 9 V = \frac{1}{3} \times 0.785 \times 12^2 \times 9 = \frac{1}{3} \times 0.785 \times 144 \times 9 V = 3 1 × 0.785 × 1 2 2 × 9 = 3 1 × 0.785 × 144 × 9 0.785 × 144 = 113.04 ; 113.04 × 9 = 1,017.36 ; ÷ 3 = 339.12 ft 3 0.785 \times 144 = 113.04;\quad 113.04 \times 9 = 1{,}017.36;\quad \div 3 = 339.12\ \text{ft}^3 0.785 × 144 = 113.04 ; 113.04 × 9 = 1 , 017.36 ; ÷ 3 = 339.12 ft 3 V gal = 339.12 × 7.48 ≈ 2,537 gal V_{\text{gal}} = 339.12 \times 7.48 \approx 2{,}537\ \text{gal} V gal = 339.12 × 7.48 ≈ 2 , 537 gal
5. mg/L, ppm, and Percent Solutions
In dilute aqueous solutions typical of water and wastewater: 1 mg/L ≈ 1 ppm (by mass) 1\ \text{mg/L} \approx 1\ \text{ppm (by mass)} 1 mg/L ≈ 1 ppm (by mass)
Percent by weight relates approximately as: 1 % ≈ 10,000 mg/L 1\% \approx 10{,}000\ \text{mg/L} 1% ≈ 10 , 000 mg/L
- Strength Approx. concentration
- 0.5% solution ~5,000 mg/L
- 1% ~10,000 mg/L
- 5% ~50,000 mg/L
- 12% sodium hypochlorite (trade) ~120,000 mg/L available Cl₂ (order of magnitude; product assay varies)
- 100% pure chemical basis 1,000,000 mg/L conceptual
Exam wording: “12% available chlorine” means 12 lb of available chlorine per 100 lb of solution (weight basis)—feed-rate problems use the decimal fraction 0.12 , not “12 mg/L.”
6. Order of Operations & Dimensional Analysis
Always:
Write the formula (from memory or sheet).
List given values with units .
Convert units before multiplying (gpm → MGD, gal → MG, inches → feet).
Multiply/divide left to right after parentheses and powers.
Sanity-check magnitude (a 1 MGD plant does not need 10,000 lb/day chlorine at 1 mg/L).
Common conversion you will use constantly: MGD = gpm × 1,440 min/day 1,000,000 = gpm 694.4 ≈ gpm 700 (rough check) \text{MGD} = \frac{\text{gpm} \times 1{,}440\ \text{min/day}}{1{,}000{,}000} = \frac{\text{gpm}}{694.4} \approx \frac{\text{gpm}}{700}\ \text{(rough check)} MGD = 1 , 000 , 000 gpm × 1 , 440 min/day = 694.4 gpm ≈ 700 gpm (rough check)
Exactly: MGD = gpm × 0.00144 \text{MGD} = \text{gpm} \times 0.00144 MGD = gpm × 0.00144 .
Example: 500 gpm = 500 × 0.00144 = 0.72 500 \times 0.00144 = 0.72 500 × 0.00144 = 0.72 MGD.
7. Common Traps That Steal Points
- Trap Wrong move Right move
- Diameter vs radius Use (r = D) in π r 2 \pi r^2 π r 2 (r = D/2), or use 0.785 D 2 0.785 D^2 0.785 D 2
- Tank height vs water depth Use empty freeboard height Use liquid depth
- MG vs gallons Forget six zeros Divide or multiply by 1,000,000
- gpm vs MGD in pounds formula Plug gpm into MGD slot Convert first
- 7.48 vs 8.34 Swap constants 7.48 = volume; 8.34 = mass of water
- Wet cake % solids Treat 20% cake as 0.20 lb dry / lb wet Dry lb = wet lb × decimal solids
- Rounding too early Round each step to 1 digit Keep 3–4 digits; match choice format
- π vs 0.785 inconsistency Mix both mid-problem Stick to formula-sheet convention
- Worked Example D — Mixed Unit Conversion
Flow is 2,500 gpm . Express as MGD and as ft³/s (cfs) roughly.
MGD: 2,500 × 0.00144 = 3.6 MGD 2{,}500 \times 0.00144 = 3.6\ \text{MGD} 2 , 500 × 0.00144 = 3.6 MGD
ft³/s: First gal/s = (2500 / 60 ≈ 41.67) gal/s; ft³/s = (41.67 / 7.48 ≈ 5.57) cfs.
8. Practice Setup Before the Next Sections
Every later formula is built from this section:
- Dosage lb/day needs MGD, mg/L, 8.34
- Detention time needs volume (gal or ft³) and consistent flow units
Loadings reuse the pounds formula on BOD, SS, etc.
Pump gpm from tank drawdown reuses cylinder volume × 7.48
If conversions feel slow, drill ten volume problems and ten gpm↔MGD problems before attempting full dosage sets.
Florida Exam Notes
Formula sheets are a tool , not a substitute for practice.
Expect geometry + conversion items even on distribution-focused forms.
Water and wastewater stems share the same constants; only the process story changes.
Keep a personal “error log” of missed unit conversions—those patterns repeat on PSI forms.