Study guide

16.4 Pump Hydraulics & Horsepower

Florida Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & FDEP Certification Framework

1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs

2 Florida Regulations & Water Law

2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules

3 Source Water & Florida Hydrogeology

3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts

4 Coagulation, Flocculation & Sedimentation

4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation

5 Filtration & Membrane Processes

5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)

6 Softening, Iron/Manganese & Taste/Odor Control

6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration

7 Disinfection & Disinfectant Byproducts

7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance

8 Corrosion Control & Chemical Treatment

8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling

9 Wastewater Collection, Preliminary & Primary Treatment

9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings

10 Secondary Treatment & Activated Sludge

10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons

11 Nutrient Removal, AWT & Reuse

11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice

12 Solids Handling & Biosolids

12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics

13 Distribution Systems & Hydraulics

13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair

14 Cross-Connection, Storage & Distribution Water Quality

14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management

15 Laboratory Testing & Sampling

15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC

16 Operator Math

16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower

17 Safety, Security & Emergency Preparedness

17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

18 Equipment, O&M & Administration

18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties

16.4 Pump Hydraulics & Horsepower

Key Takeaways Explain This Topic AI

TDH ≈ static head + friction (+ minor) losses; psi × 2.31 converts pressure to feet of head.

WHP = (Q gpm × H ft) / 3960; BHP = WHP / pump efficiency (decimal).

Wire-to-water efficiency = WHP / electrical input hp (motor × pump efficiencies approximately multiply).

Field flow: tank drop volume (geometry × 7.48) divided by minutes yields gpm.

Velocity = Q/A with consistent units; Florida exams are math-heavy—drill the big formulas under time.

Last updated: August 2026

16.4 Pump Hydraulics & Horsepower

Quick Answer: Total dynamic head (TDH) ≈ static head + friction (and minor) losses . Water horsepower WHP = ( Q gpm × H ft ) / 3960 \text{WHP} = (Q_{\text{gpm}} \times H_{\text{ft}}) / 3960 WHP = ( Q gpm ​ × H ft ​ ) /3960 . Brake horsepower accounts for pump efficiency: BHP = WHP / η pump \text{BHP} = \text{WHP} / \eta_{\text{pump}} BHP = WHP / η pump ​ . Wire-to-water efficiency folds in motor losses. Measure field gpm from tank drop ; velocity (v = Q/A). Florida exams weight math heavily—drill setups until unit conversions are automatic.

Pumps appear on water, wastewater, and distribution outlines: lift stations, high-service pumps, boosters, and backwash pumps. This section closes the operator-math chapter with power and hydraulic rate calculations.

1. Head Components

Head type Meaning Field sense

Static head Elevation difference water is lifted (and pressure head difference expressed as feet) Wet well surface to discharge HGL

  • Friction head Energy lost to pipe friction Longer, rougher, smaller, faster → more loss
  • Minor losses Fittings, valves, entrance/exit Often lumped with friction in exam problems

TDH Total head the pump must add What the pump curve must meet at the operating Q TDH ≈ H static + H friction + H minor \text{TDH} \approx H_{\text{static}} + H_{\text{friction}} + H_{\text{minor}} TDH ≈ H static ​ + H friction ​ + H minor ​

Pressure as head: H ft ≈ p psi × 2.31 H_{\text{ft}} ≈ p_{\text{psi}} × 2.31 H ft ​ ≈ p psi ​ × 2.31 .

Worked Example 1 — Static + Friction

Lift 45 ft static. Friction and minor losses total 18 ft at the design flow. Discharge pressure requirement already converted into the static/friction breakdown given. TDH = 45 + 18 = 63 ft \text{TDH} = 45 + 18 = 63\ \text{ft} TDH = 45 + 18 = 63 ft

Worked Example 2 — Pressure to Head

A pump must overcome 30 psi discharge pressure difference (simplified stem) with negligible elevation change stated separately as included. H = 30 × 2.31 = 69.3 ft H = 30 × 2.31 = 69.3\ \text{ft} H = 30 × 2.31 = 69.3 ft

2. Water Horsepower (WHP)

Water horsepower is the power delivered to the water : WHP = Q ( gpm ) × H ( ft ) 3960 \text{WHP} = \frac{Q\ (\text{gpm}) \times H\ (\text{ft})}{3960} WHP = 3960 Q ( gpm ) × H ( ft ) ​

  • Symbol Unit Notes
  • (Q) gpm Not MGD—convert if needed
  • (H) feet of head TDH
  • 3960 constant From unit conversion of power
  • WHP horsepower Ideal fluid power
  • Worked Example 3 — WHP

Pump delivers 500 gpm against 80 ft TDH. WHP = 500 × 80 3960 = 40,000 3960 ≈ 10.1 hp \text{WHP} = \frac{500 \times 80}{3960} = \frac{40{,}000}{3960} \approx 10.1\ \text{hp} WHP = 3960 500 × 80 ​ = 3960 40 , 000 ​ ≈ 10.1 hp

Worked Example 4 — WHP from MGD

Flow 1.44 MGD , head 100 ft . Q gpm = 1.44 / 0.00144 = 1,000 gpm Q_{\text{gpm}} = 1.44 / 0.00144 = 1{,}000\ \text{gpm} Q gpm ​ = 1.44/0.00144 = 1 , 000 gpm WHP = 1000 × 100 3960 ≈ 25.3 hp \text{WHP} = \frac{1000 \times 100}{3960} \approx 25.3\ \text{hp} WHP = 3960 1000 × 100 ​ ≈ 25.3 hp

3. Brake Horsepower, Motor Load & Efficiency

Pump efficiency η p \eta_p η p ​ (decimal) relates WHP to shaft power: BHP = WHP η p \text{BHP} = \frac{\text{WHP}}{\eta_p} BHP = η p ​ WHP ​

Motor efficiency η m \eta_m η m ​ : Motor input hp ≈ BHP η m \text{Motor input hp} \approx \frac{\text{BHP}}{\eta_m} Motor input hp ≈ η m ​ BHP ​

Wire-to-water efficiency (overall): η w2w = WHP Electrical input hp = η p × η m (approx., if only those losses) \eta_{\text{w2w}} = \frac{\text{WHP}}{\text{Electrical input hp}} = \eta_p \times \eta_m\ \text{(approx., if only those losses)} η w2w ​ = Electrical input hp WHP ​ = η p ​ × η m ​ (approx., if only those losses)

Or from field data: η w2w = WHP kW input × 1.341 \eta_{\text{w2w}} = \frac{\text{WHP}}{\text{kW input} \times 1.341} η w2w ​ = kW input × 1.341 WHP ​

(since 1 kW ≈ 1.341 hp).

Worked Example 5 — BHP

WHP = 10.1 hp (Example 3). Pump efficiency 70% . BHP = 10.1 / 0.70 ≈ 14.4 hp \text{BHP} = 10.1 / 0.70 \approx 14.4\ \text{hp} BHP = 10.1/0.70 ≈ 14.4 hp

Select a motor above BHP (service factor, future head, code practice)—exam may ask calculated BHP, not nameplate choice.

Worked Example 6 — Wire-to-Water

WHP = 25 hp. Measured electrical input = 30 kW. Input hp = 30 × 1.341 = 40.23 hp \text{Input hp} = 30 × 1.341 = 40.23\ \text{hp} Input hp = 30 × 1.341 = 40.23 hp η w2w = 25 / 40.23 ≈ 0.62 = 62 % \eta_{\text{w2w}} = 25 / 40.23 ≈ 0.62 = 62\% η w2w ​ = 25/40.23 ≈ 0.62 = 62%

Worked Example 7 — Combined Efficiencies

WHP = 12 hp, η p = 75 % \eta_p = 75\% η p ​ = 75% , η m = 90 % \eta_m = 90\% η m ​ = 90% . BHP = 12 / 0.75 = 16 hp \text{BHP} = 12 / 0.75 = 16\ \text{hp} BHP = 12/0.75 = 16 hp Input hp = 16 / 0.90 ≈ 17.8 hp \text{Input hp} = 16 / 0.90 ≈ 17.8\ \text{hp} Input hp = 16/0.90 ≈ 17.8 hp η w2w = 0.75 × 0.90 = 0.675 = 67.5 % \eta_{\text{w2w}} = 0.75 × 0.90 = 0.675 = 67.5\% η w2w ​ = 0.75 × 0.90 = 0.675 = 67.5%

4. Flow from Tank Drop (Field gpm)

Same geometry as chemical calibration, applied to clearwells, wet wells, or tanks: Q gpm = V gal t min Q_{\text{gpm}} = \frac{V_{\text{gal}}}{t_{\text{min}}} Q gpm ​ = t min ​ V gal ​ ​

with V gal = 0.785 D 2 H × 7.48 (cylinder) V_{\text{gal}} = 0.785 D^2 H \times 7.48\ \text{(cylinder)} V gal ​ = 0.785 D 2 H × 7.48 (cylinder)

or (L × W × H × 7.48) for rectangles.

Worked Example 8 — Rectangular Clearwell Drop

Basin 40 ft × 25 ft . Level falls 0.40 ft in 10 minutes while high-service pumps run and plant production is isolated (exam idealization). V ft 3 = 40 × 25 × 0.40 = 400 ft 3 V_{\text{ft}^3} = 40 × 25 × 0.40 = 400\ \text{ft}^3 V ft 3 ​ = 40 × 25 × 0.40 = 400 ft 3 V gal = 400 × 7.48 = 2,992 gal V_{\text{gal}} = 400 × 7.48 = 2{,}992\ \text{gal} V gal ​ = 400 × 7.48 = 2 , 992 gal Q = 2,992 / 10 = 299 gpm Q = 2{,}992 / 10 = 299\ \text{gpm} Q = 2 , 992/10 = 299 gpm

5. Velocity = Q / A v = Q A v = \frac{Q}{A} v = A Q ​

Unit consistency is critical.

  • If Q is… And A is… Velocity is…
  • cfs (ft³/s) ft² ft/s

gpm ft² need conversion: Q cfs = Q gpm / 448.8 Q_{\text{cfs}} = Q_{\text{gpm}} / 448.8 Q cfs ​ = Q gpm ​ /448.8 approx.

Common teaching conversion: Q cfs ≈ Q gpm 449 Q_{\text{cfs}} ≈ \frac{Q_{\text{gpm}}}{449} Q cfs ​ ≈ 449 Q gpm ​ ​

(some sheets use 448.8).

Worked Example 9 — Force Main Velocity

Flow 600 gpm in a pipe with internal area 0.349 ft² (approx. 8-in ID order of magnitude). Q cfs = 600 / 448.8 ≈ 1.34 cfs Q_{\text{cfs}} = 600 / 448.8 ≈ 1.34\ \text{cfs} Q cfs ​ = 600/448.8 ≈ 1.34 cfs v = 1.34 / 0.349 ≈ 3.8 ft/s v = 1.34 / 0.349 ≈ 3.8\ \text{ft/s} v = 1.34/0.349 ≈ 3.8 ft/s

Worked Example 10 — Area from Diameter Then Velocity

Pipe D = 12 in = 1.0 ft , flow 1,000 gpm . A = 0.785 × 1.0 2 = 0.785 ft 2 A = 0.785 × 1.0^2 = 0.785\ \text{ft}^2 A = 0.785 × 1. 0 2 = 0.785 ft 2 Q cfs = 1000 / 448.8 ≈ 2.23 cfs Q_{\text{cfs}} = 1000 / 448.8 ≈ 2.23\ \text{cfs} Q cfs ​ = 1000/448.8 ≈ 2.23 cfs v = 2.23 / 0.785 ≈ 2.84 ft/s v = 2.23 / 0.785 ≈ 2.84\ \text{ft/s} v = 2.23/0.785 ≈ 2.84 ft/s

Operator context: Very high velocities increase friction head and water-hammer risk; very low velocities may allow settling in force mains—exam theory plus design standards.

6. Master Formula Table — Pump & Hydraulics Math

  • Quantity Formula
  • Head from psi (H = p × 2.31)
  • TDH static + friction + minor
  • WHP ( Q gpm × H ft ) / 3960 (Q_{\text{gpm}} × H_{\text{ft}}) / 3960 ( Q gpm ​ × H ft ​ ) /3960
  • BHP WHP / η pump \eta_{\text{pump}} η pump ​
  • Motor input hp BHP / η motor \eta_{\text{motor}} η motor ​
  • Wire-to-water η WHP / input hp
  • gpm from drop V gal / t min V_{\text{gal}} / t_{\text{min}} V gal ​ / t min ​
  • Velocity (Q/A) (consistent units)
  • 7. Florida Exam Math Weight — Practice Strategy

FDEP water/wastewater operator exams are multiple-choice but calculation-dense . Math appears inside treatment, distribution, and wastewater process stems—not only in a labeled “math section.”

High-yield practice plan:

Memorize the “big five” setups: pounds formula, V/Q detention, % removal, WHP/BHP, tank volume × 7.48.

Always rewrite the given flow in the unit the formula needs before multiplying.

Work backward from answer choices when stuck: plug each plausible Q or H only if time is short—but prefer forward setup.

Use the official formula sheet in timed practice so eye-find speed is real.

Log every miss by trap type (unit, %, efficiency as percent vs decimal, diameter).

Target accuracy before speed , then add a timer (Class A/B/C: 100 items / 3 hours ≈ 1.8 min each—including reading).

Mix water and wastewater stems —same 8.34 and 3960, different stories.

Re-work this chapter’s examples with different numbers until the steps feel mechanical.

Worked Example 11 — End-to-End Pump Item

Static lift 50 ft , friction 25 ft , flow 800 gpm , pump efficiency 65% . Find BHP. TDH = 75 ft \text{TDH} = 75\ \text{ft} TDH = 75 ft WHP = ( 800 × 75 ) / 3960 = 60,000 / 3960 ≈ 15.15 hp \text{WHP} = (800 × 75) / 3960 = 60{,}000 / 3960 ≈ 15.15\ \text{hp} WHP = ( 800 × 75 ) /3960 = 60 , 000/3960 ≈ 15.15 hp BHP = 15.15 / 0.65 ≈ 23.3 hp \text{BHP} = 15.15 / 0.65 ≈ 23.3\ \text{hp} BHP = 15.15/0.65 ≈ 23.3 hp

Worked Example 12 — Sanity Check

If calculated BHP is 2 hp for a large raw-water pump at 5,000 gpm and 100 ft head, you almost certainly forgot to convert units or misplaced a zero —WHP alone is (5000×100/3960 ≈ 126) hp before efficiency.

8. Chapter 16 Integration

  • Earlier section Pump section connection
  • 16.1 Conversions gpm↔MGD, gal from ft³, psi↔ft
  • 16.2 Dosage & DT Feed pumps calibrated by drawdown; contact time uses Q
  • 16.3 Loadings Plant Q drives every lb/day load
  • 16.4 Pumps WHP/BHP, velocity, field Q from level change

Operators who treat math as a single toolkit —not isolated tricks—finish Florida exams with time left to recheck the two or three hardest calculations.