Study guide

17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

Florida Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & FDEP Certification Framework

1.1 Current Exam Facts & PSI Logistics 1.2 License Families, Classes A–D & Distribution Levels 1.3 Examination Eligibility, Approved Courses & Linear Progression 1.4 Licensure Experience, Fees, Renewal & CEUs

2 Florida Regulations & Water Law

2.1 Chapter 62-602 Operator Certification Rules 2.2 FAC 62-550 Drinking Water Standards & SDWA Primacy 2.3 FAC 62-600 Wastewater & AWT 5-5-3-1 Standards 2.4 FAC 62-610 Reclaimed Water Reuse Rules

3 Source Water & Florida Hydrogeology

3.1 Characteristics of Source Water & Contaminants 3.2 Floridan Aquifer, Wells & Saltwater Intrusion 3.3 Reservoir, Wellfield Management & Water Management Districts

4 Coagulation, Flocculation & Sedimentation

4.1 Coagulation Chemistry & Jar Testing 4.2 Flocculation Process Control 4.3 Clarification & Sedimentation

5 Filtration & Membrane Processes

5.1 Granular Media Filtration Theory 5.2 Filter Operation, Backwash & Troubleshooting 5.3 Membrane Filtration & Reverse Osmosis (Florida RO)

6 Softening, Iron/Manganese & Taste/Odor Control

6.1 Lime Softening & Ion Exchange 6.2 Iron and Manganese Control 6.3 Taste and Odor Control & Aeration

7 Disinfection & Disinfectant Byproducts

7.1 Chlorination Chemistry & Residual Control 7.2 CT Calculations & Pathogen Inactivation 7.3 Alternative Disinfectants (Chloramines, ClO2, Ozone, UV) 7.4 DBP Formation, Stage 1/2 Rules & Compliance

8 Corrosion Control & Chemical Treatment

8.1 Corrosion Control & Lead and Copper Rule 8.2 Chemical Treatment, Fluoridation & Feed Systems 8.3 Residuals Disposal & Waste Handling

9 Wastewater Collection, Preliminary & Primary Treatment

9.1 Collection Systems, Lift Stations & SSO Reporting 9.2 Preliminary Treatment: Screening & Grit 9.3 Primary Sedimentation 9.4 Wastewater Characteristics & Plant Loadings

10 Secondary Treatment & Activated Sludge

10.1 Secondary Process Fundamentals 10.2 Activated Sludge Process Control 10.3 Activated Sludge Troubleshooting 10.4 Fixed-Film, Package Plants & Lagoons

11 Nutrient Removal, AWT & Reuse

11.1 Biological Nutrient Removal (N & P) 11.2 Florida AWT 5-5-3-1 Standards 11.3 Effluent Disposal Options 11.4 Reclaimed Water Systems & FAC 62-610 Practice

12 Solids Handling & Biosolids

12.1 Sludge Thickening & Digestion 12.2 Dewatering & Residuals Disposal 12.3 Biosolids Stabilization & Land Application Basics

13 Distribution Systems & Hydraulics

13.1 Distribution Network Design & Operations 13.2 Pipes, Valves, Hydrants & Appurtenances 13.3 Hydraulics, Pressure & Pumping 13.4 Main Disinfection, Breaks & Repair

14 Cross-Connection, Storage & Distribution Water Quality

14.1 Cross-Connection Control & Backflow Prevention 14.2 Storage Tanks & Reservoirs 14.3 Distribution Water Quality, Flushing & Residual Management

15 Laboratory Testing & Sampling

15.1 Sampling, Preservation & Chain of Custody 15.2 Physical & Chemical Water Analysis 15.3 Wastewater Process Lab Testing 15.4 Microbiological Testing & QA/QC

16 Operator Math

16.1 Math Fundamentals, Conversions & Formula Sheets 16.2 Dosage, Chemical Feed & Detention Time 16.3 Flows, Loadings, Removal Efficiency & Solids Math 16.4 Pump Hydraulics & Horsepower

17 Safety, Security & Emergency Preparedness

17.1 Confined Space, LOTO, PPE & Chemical Safety 17.2 Chlorine Gas Safety & Emergency Response 17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

18 Equipment, O&M & Administration

18.1 Operate & Maintain Plant Equipment 18.2 Process Control Instrumentation & SCADA Basics 18.3 Records, Reporting & Administrative Duties

17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

Key Takeaways Explain This Topic AI

Plant security combines physical controls (fencing, lighting, locks, visitor control) with cyber/SCADA awareness so unauthorized people and malware cannot disrupt treatment or disguise contamination.

Vulnerability assessments identify critical assets, threats, and consequences; results drive security upgrades and emergency response planning under drinking-water security expectations.

Florida hurricane readiness prioritizes fuel and generators, chemical inventory, staffing/housing plans, mutual aid, flood and SSO risk reduction, and pre-storm isolation of vulnerable assets.

Contingency and emergency response plans define roles, communications, alternate supply, and recovery steps; operators must know their position before landfall, not during it.

During emergencies, coordinate with FDEP and local emergency management, and use boil-water and public-notice tools correctly when pressure loss, contamination, or main breaks threaten public health.

Last updated: August 2026

17.3 Security, Hurricane Preparedness & Contingency Planning (Florida)

Quick Answer: Protect critical assets with fencing, lighting, access control, and SCADA cyber hygiene ; complete vulnerability assessment thinking; and for Florida storms pre-stage fuel, generators, chemicals, staff, and mutual aid while planning for flood and SSO risk. Use the emergency/contingency plan to communicate with FDEP , emergency management, and the public—including boil-water notices when pressure or contamination is compromised.

Florida’s operator job is inseparable from disasters and security . Hurricanes, tropical storms, tornadoes, flooding, and cyber incidents all threaten treatment continuity. Class C safety/security expectations and real utility practice both require you to keep bad actors out, keep power and chemicals in, and tell the public the truth when water may be unsafe.

1. Plant Security Fundamentals

Drinking-water and wastewater facilities are critical infrastructure . A hostile person or careless trespasser can vandalize equipment, contaminate finished water, steal chemicals, or disable power. Security is layered:

  • Layer Examples Operator role
  • Deter Fencing, signage, lighting, visible cameras Report gaps (cut fence, dark zones)
  • Detect Alarms, intrusion sensors, SCADA alerts, rounds Investigate alarms; do not silence without cause
  • Delay Locks, hardened doors, valve locks, cage enclosures Keep gates closed; control keys/cards
  • Respond Police/security SOP, emergency shutoffs Follow call tree; preserve scene if crime suspected
  • Recover Spares, mutual aid, alternate supply Support restoration under ICS
  • 1.1 Physical security checklist
  • Perimeter fencing intact; gates closed and locked when unattended
  • Lighting on chemical areas, entries, clearwells, and parking
  • Access control — visitor logs, employee badges, contractor escorts
  • Hatches and vaults locked; ladder guards in place
  • Chemical storage secured (chlorine, hypochlorite, fluoride, fuel)
  • Vehicles and boats (for coastal plants) inventoried and fueled
  • Deliveries verified—know who is authorized to drop chemicals

If someone you do not recognize is photographing clearwells or asking detailed questions about residual levels and access points, treat it as a security concern and notify supervision per policy—not as a casual tour.

1.2 Cyber and SCADA awareness

Modern plants use SCADA , remote telemetry, VFDs, and networked analyzers. Cyber events can:

  • Stop pumps or change setpoints without a valid process reason
  • Hide alarms or falsify residual/turbidity readings
  • Lock operators out of HMI screens

Operator-level cyber hygiene:

Use unique credentials; never share passwords on sticky notes at the HMI.

Do not plug unknown USB drives into control computers.

Be suspicious of phishing emails about “urgent password resets.”

Report anomalous setpoint changes, unexplained PLC faults, or remote logins.

Keep corporate IT/OT staff in the loop; do not disable firewalls “to make the radio work.”

You do not need to be a cybersecurity engineer for the exam—you need to know that SCADA is a security surface and that unusual automation behavior can be malicious or accidental but must be investigated.

2. Vulnerability Assessment Concept

A vulnerability assessment (VA) systematically asks:

What are our critical assets (wells, treatment trains, clearwells, high-service pumps, generators, chemical systems, key mains)?

What threats exist (vandalism, terrorism, insider threat, cyber, natural disaster)?

How vulnerable is each asset (open access, single points of failure)?

What are the consequences if the asset fails (boil water for 50,000 people, raw sewage into a bay)?

What countermeasures reduce risk (redundancy, hardening, cameras, training)?

Drinking-water systems in the United States have long been expected to assess vulnerabilities and maintain emergency response capability (including post-9/11 security frameworks and ongoing EPA/state expectations). For exam purposes: know why VAs exist (protect public health by reducing high-consequence failures) and that findings should feed both capital security projects and the emergency response plan (ERP) .

Wastewater plants use similar logic: loss of power or flooded headworks can create sanitary sewer overflows (SSOs) and environmental damage—Florida’s coastal and low-lying plants are especially exposed.

3. Florida Hurricane Preparedness

Hurricane season (traditionally June 1–November 30) is not theoretical for Florida operators. Storms threaten:

  • Electric grid collapse for days
  • Flooding of low electrical gear, wet wells, and plants in surge zones
  • Wind damage to buildings, tanks, and chemical facilities
  • Staffing shortages when employees evacuate or roads close
  • Supply chain breaks for fuel, chemicals, and parts
  • Distribution main breaks and pressure loss after debris and washouts
  • Collection system SSOs when lift stations fail
  • 3.1 Pre-storm operational priorities

Priority Actions

Power resilience Test generators under load; top off diesel/propane ; verify transfer switches; stage spare filters/oil; confirm fuel contracts and priority status

Chemicals Inventory chlorine/hypochlorite, coagulants, polymers, fluoride, dechlor; fill to safe working levels without over-pressuring or exceeding storage limits

Process positioning Maximize finished-water storage if safe; lower digester covers/foam risks per SOP; secure loose items; isolate nonessential outdoor equipment

Flood prep Deploy stop logs, sandbags, elevate portable equipment; move vehicles out of surge zones; protect MCCs and analyzers

Staffing Mission-essential roster; food, water, cots; family evacuation plans so operators can stay; relief schedules

Communications Charged radios, satellite/backup phones, printed call trees (when cell towers fail)

Mutual aid Confirm FloridaWARN or regional mutual-aid contacts; know what you can request (gensets, operators, tankers)

  • Documentation Photograph assets; backup electronic records; stage paper log sheets
  • 3.2 Generators and fuel—exam and field critical

If the utility cannot run high-service pumps, well pumps, or blowers, public health fails quickly. Operators should know:

Generator nameplate capacity vs essential load (not every building load is essential).

Automatic transfer vs manual procedures.

Runtime hours at expected load and fuel burn rates .

Cooling, oil pressure, and alarm response during multi-day runs.

That wet or overloaded generators fail—maintenance before the storm is non-negotiable.

Coastal plants may need to shut down and evacuate under emergency management orders; inland plants may run islanded for a week. Both scenarios belong in the written plan.

3.3 Flooding and SSO risk

Florida’s flat topography and high water tables mean:

Lift stations without power overflow to streets and waterways.

Infiltration/inflow spikes during torrential rain.

Treatment plants in floodplains can lose electrical rooms first.

Mitigations include portable generators on quick-connects, bypass pumping plans, raised control panels, and pre-emptive reduction of wet-well levels where strategies allow. After the storm, SSO reporting and cleanup follow state/local rules—safety first (live wires, contaminated water, structural damage).

3.4 Distribution system after the storm

Expect:

  • Pressure loss from power outages or massive leaks
  • Main breaks from uprooted trees and washouts
  • Cross-connection risk if pressures go negative
  • Need for boil-water notices , flushing, and bacteriological clearance before rescinding notices

Operators coordinate with distribution crews, labs, and public information officers—not alone in a vacuum.

4. Contingency and Emergency Response Plans

A contingency plan / ERP is the utility’s playbook for abnormal conditions. Core contents typically include:

  • Goals — protect public health, safety, environment, and critical service
  • Organization — incident command roles, succession of authority

Risk scenarios — hurricane, tornado, flood, contamination, cyber, malevolent act, major main break, treatment failure

  • Immediate actions — shutdown criteria, isolation valves, alternate sources
  • Communications — internal, FDEP, DOH/county health, emergency management, customers, media
  • Resources — equipment lists, mutual aid, contractors, laboratories
  • Recovery — sampling, disinfection, after-action reviews

Operator exam angle: You may not rewrite the ERP on test day, but you must know that plans exist, that roles are pre-assigned , and that improvisation without communication causes conflicting public messages.

Practice makes plans real: tabletop exercises and annual hurricane drills surface missing fuel contracts and dead radio batteries before landfall.

  • 5. Communicating with FDEP and the Public
  • 5.1 Regulatory and emergency partners

During significant events, utilities commonly coordinate with:

  • Local emergency management / EOC for storm operations and public messaging
  • FDEP for drinking-water and wastewater incident reporting, permit exceedances, and recovery expectations
  • County health departments on boil-water and epidemiological concerns
  • Mutual aid networks for shared resources

Know your utility’s who notifies whom matrix. Unauthorized social-media posts by individual operators can contradict official notices—use approved channels.

5.2 Boil water and public notice concepts

Boil-water notices (or advisories/orders, terminology varies by jurisdiction) protect consumers when finished water may be microbially unsafe—classic triggers include:

  • Loss of system pressure / widespread outages
  • Main breaks with possible contamination
  • Treatment failures (e.g., inadequate disinfection)
  • Confirmed or suspected pathogen contamination

Public notice themes (aligned with SDWA public notification concepts):

  • Element Why it matters
  • What happened Clear cause in plain language
  • Who is affected Geography / pressure zones
  • What to do Boil instructions, bottled water, do-not-drink if chemical (boiling does not remove all chemicals)
  • What the utility is doing Repairs, flushing, sampling
  • When more info is available Hotline, website, alert system
  • Important distinctions

Microbial risk → boiling often appropriate when pressure/pathogen concerns dominate.

Chemical contamination (fuel spill into a well, etc.) → boiling may concentrate some chemicals or be irrelevant; “do not drink/do not use” may be required instead.

Rescind notices only after corrective action and satisfactory coliform (or other required) sampling per state/utility protocol—not because “the water looks clear.”

Consumer Confidence Reports and Tiered public notices for MCL violations are related compliance tools; storm boil-water actions are often the acute version of the same public-health communication duty.

6. Putting Security and Storm Prep Together

A well-run Florida utility treats security and hurricane prep as one continuity program:

Hardened gates keep looters out of a dark plant after evacuation.

Cyber backups survive building damage.

VA-identified single points of failure get portable generator taps before June.

ERP call trees reach FDEP and the county EOC without hunting for phone numbers in a flooded office.

Operators who only memorize process chemistry but cannot explain generator fuel, boil-water triggers, or upwind chlorine response are only half-prepared for Class C realities—and for the night the hurricane actually comes.

Memory Hooks

Deter–detect–delay–respond–recover for physical security.

SCADA passwords and USB discipline are operator security tools.

VA finds critical assets and weak points; ERP uses the findings.

Florida storms: fuel, gensets, chemicals, people, mutual aid, flood/SSO.

FDEP + EOC + public messaging run through the plan.

Boil water for microbial/pressure events; don’t assume boiling fixes chemical contamination; sample before lifting notices.