Study guide

6.5 Mechanical Circulatory Support (IABP and ECMO Transport)

Certified Flight Paramedic FP-C

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Safety and Transport

1.1 Pre-Flight Operations and Equipment Stowing 1.2 Scene Safety and Landing Zone Management 1.3 In-Flight Emergency Response and Abort Protocols 1.4 Post-Incident Survival and Rescue Operations

2 Chapter 2: Flight Physiology

2.1 Gas Laws in Transport Medicine 2.2 Hypoxia: Classification and Corrective Actions 2.3 Environmental Stressors of Flight and Cabin Pressurization

3 Chapter 3: Airway, Anesthesia, and Analgesics

3.1 Advanced Airway Assessment and Difficult Airway Algorithms 3.2 Rapid Sequence Intubation (RSI) and Medication Selection 3.3 Mechanical Ventilation: Modes, Settings, and Monitoring 3.4 Transport Oxygen Systems and Duration Calculations 3.5 Anaesthetics and Induction Agents 3.6 Neuromuscular Blocking Agents 3.7 Analgesics and Vasoactive Sedative Titration

4 Chapter 4: Medical Emergencies

4.1 Respiratory Failure Pathologies (ARDS, Asthma, COPD) 4.2 Sepsis and Septic Shock Management 4.3 Diabetic Ketoacidosis (DKA) and Hyperosmolar Hyperglycemic State (HHS) 4.4 Toxicological Emergencies and Overdose Antidotes 4.5 Environmental Emergencies: Core Temperature Control (Hypo/Hyperthermia) 4.6 Adrenal Crisis and Incretin/Endocrine Emergencies

5 Chapter 5: Neurological Emergencies

5.1 Neurological Assessment and GCS Motor Scales 5.2 Traumatic Brain Injury (TBI) and Intracranial Pressure (ICP) Management 5.3 Stroke Care: Hemorrhagic vs. Ischemic Thrombectomy Candidates 5.4 Status Epilepticus Seizure Protocols 5.5 Spinal Trauma and Spinal Cord Syndromes

6 Chapter 6: Cardiac Emergencies

6.1 Acute Coronary Syndrome (ACS) and 12-Lead Interpretation 6.2 Dysrhythmias: Bradycardias and High-Grade AV Blocks 6.3 Cardiogenic Shock and Systemic Vascular Resistance (SVR) 6.4 Vasoactive Medication Titration (Norepinephrine, Epinephrine, Dopamine) 6.5 Mechanical Circulatory Support (IABP and ECMO Transport) 6.6 Post-Cardiac Arrest Care and Targeted Temperature Management

7 Chapter 7: Trauma/Burn Resuscitation

7.1 Damage Control Resuscitation and the Lethal Triad 7.2 Hemorrhage Control and Massive Transfusion Protocols (MTP) 7.3 Penetrating Thoracic Trauma and Cardiac Tamponade (Beck's Triad) 7.4 Blunt Force Deceleration Injuries (Traumatic Aortic Rupture) 7.5 Burn Physiology: Calculations (Parkland Formula) and Escharotomy

8 Chapter 8: Maternal, Fetal, and Neonatal Emergencies

8.1 Perinatal Transport and Maternal Complications 8.2 Ob/Gyn Emergencies and Emergency Delivery 8.3 Neonatal Resuscitation Program (NRP) Standards

9 Chapter 9: Pediatric Emergencies

9.1 Pediatric Assessment Triangle and Pathophysiology 9.2 Pediatric Airway and Ventilatory Management 9.3 Pediatric Pharmacology and Dosing Calculations 9.4 Pediatric Trauma and Resuscitation

10 Chapter 10: Professional Considerations

10.1 CAMTS Standards and Quality Metrics 10.2 Medical Ethics and Transport Law (EMTALA) 10.3 Crew Resource Management (CRM) and Human Factors

6.5 Mechanical Circulatory Support (IABP and ECMO Transport)

Key Takeaways Explain This Topic AI

The Intra-Aortic Balloon Pump (IABP) improves coronary perfusion via diastolic inflation (at the dicrotic notch) and reduces cardiac workload via systolic deflation (during isovolumetric contraction).

Late deflation is the most dangerous IABP timing error, forcing the left ventricle to eject against an inflated balloon and drastically increasing myocardial oxygen consumption.

Under Boyle's Law, decrease in atmospheric pressure at higher flight altitudes causes helium inside the IABP balloon to expand, requiring automatic purge-and-fill regulation.

Helium line condensation or rust-colored blood flakes in the IABP tubing indicate a balloon membrane rupture, requiring immediate pump shutoff and catheter clamping.

Veno-Venous (VV) ECMO provides respiratory support only, requiring a functioning native heart, while Veno-Arterial (VA) ECMO provides both cardiac and respiratory support by bypassing the cardiopulmonary system.

Last updated: July 2026

6.5 Mechanical Circulatory Support (IABP and ECMO Transport)

Critical care transport of patients on mechanical circulatory support represents one of the highest-risk scenarios in aerospace medicine. Flight paramedics must understand the physiological principles of the Intra-Aortic Balloon Pump (IABP) and Extracorporeal Membrane Oxygenation (ECMO) to ensure patient safety, maintain therapeutic support, and manage complications during transit.

Intra-Aortic Balloon Pump (IABP) Principles

The IABP is a temporary circulatory assist device placed in the descending thoracic aorta. Its tip must lie approximately 1 to 2 cm distal to the origin of the left subclavian artery and proximal to the renal arteries (level of the 2nd to 3rd intercostal space). The IABP operates on the principle of counterpulsation , synchronizing balloon inflation and deflation with the patient's cardiac cycle to improve coronary perfusion and reduce left ventricular workload.

Diastolic Inflation

Inflation occurs at the onset of diastole, which corresponds with the dicrotic notch on the arterial pressure waveform (the moment of aortic valve closure).

Physiological Effects: As the balloon inflates, it displaces blood retrograde into the aortic root and coronary ostia, significantly increasing coronary artery perfusion pressure. It also displaces blood anterograde into the systemic circulation, enhancing cerebral, renal, and distal organ perfusion. This effect is known as diastolic augmentation .

Systolic Deflation

Deflation occurs immediately before the onset of systole, during the isovolumetric contraction phase (which corresponds to the R-wave on the ECG or the end-diastolic dip on the arterial waveform, just before the aortic valve opens).

Physiological Effects: Rapid deflation of the balloon creates a vacuum (vacuum/venturi effect) within the aorta. This dramatically lowers the intra-aortic pressure, reducing the afterload the left ventricle must overcome to eject blood. Consequently, stroke volume and cardiac output increase, while myocardial wall tension, myocardial workload, and myocardial oxygen consumption ( M V O 2 MVO_2 M V O 2 ​ ) decrease.

IABP Timing Errors and Hemodynamic Consequences

Precise timing is critical. Timing errors disrupt the cardiac cycle and can cause severe hemodynamic instability:

Timing Error Timing Description Hemodynamic Consequences

Early Inflation Inflation before the dicrotic notch (during late systole, before aortic valve closes). The balloon inflates while the LV is still ejecting blood. This causes premature aortic valve closure, decreases stroke volume, and increases afterload and myocardial oxygen demand.

Late Inflation Inflation occurs long after the dicrotic notch (mid-diastole). Coronary perfusion is compromised, resulting in suboptimal diastolic augmentation.

Early Deflation Deflation occurs early in diastole (well before systole). Displaces blood away from the coronary arteries prematurely (retrograde flow), reduces afterload protection, and yields no assisted systole benefits.

Late Deflation Balloon remains inflated at the onset of systole (valve opening). The most dangerous error. The left ventricle must eject against an inflated balloon, dramatically increasing afterload, LV wall stress, and myocardial oxygen consumption, which can precipitate acute heart failure.

IABP Transport Considerations and Emergency Management

Gas Laws and Altitude Changes: The IABP balloon uses helium, a low-density gas that allows for rapid inflation and deflation. According to Boyle's Law , gas volume is inversely proportional to pressure. As a flight crew climbs in altitude, atmospheric pressure decreases, causing the helium gas inside the balloon to expand. During descent, the gas contracts. Modern transport pumps (such as the Cardiosave) utilize automatic purge-and-fill cycles to adjust balloon volume to atmospheric pressure changes. The crew must monitor for high-pressure and leak alarms during altitude changes.

Balloon Rupture: If the balloon membrane leaks, blood enters the catheter. The helium gas reacts with blood, creating hard, rust-colored flakes. Clinicians will note rust-colored flakes, blood condensation, or frank blood in the transparent catheter tubing, along with a sudden loss of diastolic augmentation and a "catheter leak" alarm.

Action: Immediately stop the pump, clamp the catheter line, and prepare for emergent surgical extraction. Keeping the pump running will pump helium into the patient's arterial system, causing a fatal gas embolism, and blood will clot inside the balloon, trapping it in an inflated state.

Power/Pump Failure: If the pump fails completely and cannot be restarted, the balloon must be manually inflated and deflated using a syringe and a three-way stopcock every 3 to 5 minutes with 40 mL of air or helium. This manual action prevents blood from pooling and clotting on the balloon membrane, which would cause a massive thromboembolic stroke or limb ischemia.

Extracorporeal Membrane Oxygenation (ECMO) Basics

ECMO is a form of temporary cardiopulmonary bypass used for patients in refractory cardiac or respiratory failure. The circuit consists of a drainage cannula, a centrifugal pump, a membrane oxygenator (which exchanges C O 2 CO_2 C O 2 ​ and O 2 O_2 O 2 ​ ), a heat exchanger, and a return cannula.

Veno-Venous (VV) ECMO

Circuit Flow: Blood is drained from a large vein (e.g., femoral vein), oxygenated, and returned to a large vein (e.g., internal jugular vein or right atrium).

Support Provided: Respiratory support only. The patient's native heart must provide all the cardiac output to circulate the oxygenated blood. It is indicated for refractory respiratory failure (e.g., severe ARDS).

Recirculation: A primary complication where oxygenated blood from the return cannula is immediately drawn back into the drainage cannula without circulating through the systemic vascular bed, leading to persistent patient hypoxia despite high ECMO flows.

Veno-Arterial (VA) ECMO

Circuit Flow: Blood is drained from a large vein (femoral vein), oxygenated, and returned to a large artery (femoral artery or ascending aorta).

Support Provided: Both hemodynamic and respiratory support. By returning blood directly to the arterial system, VA-ECMO bypasses the heart and lungs, providing complete circulatory support. It is indicated for cardiogenic shock, refractory cardiac arrest (E-CPR), or post-cardiotomy shock.

Transport Challenges

Cannula Displacement: The most catastrophic transport hazard. Decannulation leads to immediate, massive hemorrhage. Cannulae must be meticulously secured, and the patient must be chemically or physically restrained during movement.

Line Chattering (Preload Dependency): ECMO flow is highly dependent on venous return (preload). Hypovolemia or cannula malposition leads to "chattering" (the drainage line violently shakes as the negative pressure sucks the vein wall against the cannula tip). Treatment involves administering small fluid boluses or lowering the pump speed.

Anticoagulation: Patients require systemic heparinization to prevent thrombi in the oxygenator, creating a high risk for bleeding during patient handling.

Loading diagram... IABP Waveform Timing and Counterpulsation Cycle