Study guide
9.3 Cross Sections of 3D Figures & Solids of Revolution
FTCE Mathematics 6-12 026
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Rational Number Systems
1.1 FTCE Mathematics 6-12 Overview, Interface & Test-Taking Strategies 1.2 Rational Numbers, Representations & Multi-Step Operations
2 Chapter 2: Real Number Approximations & Proportional Reasoning
2.1 Irrational Numbers, Radical Estimation & Scientific Notation 2.2 Ratios, Rates, Proportions & Dimensional Analysis 2.3 Percent Applications, Financial Models & Depreciation
3 Chapter 3: Algebraic Expressions & Polynomial Operations
3.1 Polynomial Arithmetic, Factoring Strategies & Special Products 3.2 Radical Operations, Rational Expressions & Equations 3.3 Field Properties, Exponent Laws & Literal Equations
4 Chapter 4: Linear Relationships, Systems & Inequalities
4.1 Linear Equations, Slope Concepts & Line Forms 4.2 Systems of Linear Equations & Real-World Applications 4.3 Single & Systems of Linear Inequalities on the Coordinate Plane 4.4 Absolute Value Equations & Inequalities in One and Two Variables
5 Chapter 5: Quadratic Equations, Functions & Complex Numbers
5.1 Quadratic Equations, Discriminant & Complex Number Arithmetic 5.2 Quadratic Functions: Vertex, Axis, Intercepts & Concavity 5.3 Quadratic Inequalities in One/Two Variables & Optimization
6 Chapter 6: Function Foundations, Transformations & Inverses
6.1 Function Definitions, Relations, Domain, Range & Notation 6.2 Function Families, Key Graphical Behaviors & Even/Odd Symmetry 6.3 Shifting, Scaling & Reflecting Functions Across Representations 6.4 Function Composition, Invertibility & Inverse Functions
7 Chapter 7: Geometric Foundations, Angles & Deductive Proofs
7.1 Angle Relationships, Parallel Lines & Transversals 7.2 Triangle Sum, Exterior Angles & Polygon Angle Formulas 7.3 Formal Proof Methods, CPCTC & Quadrilateral Properties
8 Chapter 8: Congruence, Similarity & Geometric Transformations
8.1 Triangle Congruence (SSS, SAS, ASA, AAS, HL) & Similarity (AA, SAS, SSS) 8.2 Rigid Motions: Translations, Reflections, Rotations & Symmetry 8.3 Dilations, Scale Factors & Proportional Reasoning in Geometry
9 Chapter 9: Coordinate Geometry & 3D Spatial Measurement
9.1 Distance, Midpoint, Slope Criteria & Coordinate Proofs 9.2 Perimeter, Area, Surface Area & Volume of 2D and 3D Figures 9.3 Cross Sections of 3D Figures & Solids of Revolution
10 Chapter 10: Circle Theorems & Geometric Constructions
10.1 Central, Inscribed, Tangent & Chord Angles and Arcs 10.2 Intersecting Chords, Secant/Tangent Lengths, Arc Length & Sector Area 10.3 Euclidean Constructions with Compass and Straightedge
11 Chapter 11: Conic Sections & Coordinate Modeling
11.1 Circles and Parabolas: Geometric Definitions, Equations & Modeling 11.2 Ellipses and Hyperbolas: Foci, Axes, Asymptotes & Real-World Applications
12 Chapter 12: Trigonometric Foundations & Oblique Triangles
12.1 Right-Triangle Trigonometry, Pythagorean Theorem & Special Triangles 12.2 The Unit Circle, Radian Measure & Exact Trigonometric Values 12.3 Law of Sines (Ambiguous Case), Law of Cosines & Oblique Triangle Area
13 Chapter 13: Trigonometric Functions, Polar & Parametric Systems
13.1 Graphs of the Six Trigonometric Functions & Periodic Modeling 13.2 Polar Coordinates, Polar-Rectangular Conversion & Polar Graphs 13.3 Parametric Equations, Elimination of Parameters & Projectile Motion
14 Chapter 14: Descriptive Statistics & Data Distributions
14.1 Measures of Central Tendency, Dispersion & Resistant Statistics 14.2 Univariate Displays (Histograms, Boxplots, Stemplots) & Distribution Shapes 14.3 Normal Distribution Properties, Empirical Rule & Standard Normal Z-Scores
15 Chapter 15: Statistical Studies, Bivariate Data & Linear Regression
15.1 Statistical Study Design, Random Sampling Techniques & Sources of Bias 15.2 Survey Sampling, Margin of Error & Population Estimation 15.3 Scatterplots, Correlation Coefficient r, Linear Regression & Residuals
16 Chapter 16: Probability Theory, Two-Way Tables & Expected Value
16.1 Fundamental Counting Principle, Permutations & Combinations 16.2 Addition Rule, Multiplication Rule, Independent Events & Conditional Probability 16.3 Two-Way Frequency Tables, Law of Large Numbers & Expected Value of Random Variables
17 Chapter 17: Precalculus: Polynomial, Rational & Transcendental Functions
17.1 Fundamental Theorem of Algebra, Remainder/Factor Theorems & Polynomial Roots 17.2 Rational Functions, Domain Restrictions, Holes & Asymptotes 17.3 Exponential & Logarithmic Functions, Base e & Logarithmic Properties
18 Chapter 18: Sequences, Series, Binomial Theorem & Vectors
18.1 Arithmetic & Geometric Sequences, Finite Sums & Infinite Series Convergence 18.2 Binomial Theorem, Pascal's Triangle & General Term Determination 18.3 Vector Representations, Operations, Magnitude, Direction & Dot Product
19 Chapter 19: Differential Calculus Foundations
19.1 Limits, One-Sided Limits, Indeterminate Forms & Continuity 19.2 Derivative Definition, Power, Product, Quotient & Transcendental Rules 19.3 Chain Rule, Tangent Line Equations & Rates of Change
20 Chapter 20: Applications of Derivatives & Integral Calculus
20.1 First & Second Derivative Tests, Extrema, Concavity & Optimization 20.2 Antiderivatives, Indefinite Integrals & Integration by U-Substitution 20.3 Fundamental Theorem of Calculus, Net Signed Area & Geometric Applications
21 Chapter 21: Mathematical Representations, Progressions & Tools
21.1 Concrete-Representational-Abstract (CPA) Progressions & Concept Continuity 21.2 The Rule of Four: Translating Among Representations to Support Fluency 21.3 Manipulatives, Dynamic Software & Technology in Secondary Mathematics
22 Chapter 22: Assessment, Error Analysis & Misconception Remediation
22.1 Student Misconceptions & Error Analysis Across Core Secondary Domains 22.2 Evaluating Validity of Student Mathematical Arguments & Reasonableness Checks 22.3 Formative Assessment Formats, Data-Driven Differentiation & Tiered Tasks
9.3 Cross Sections of 3D Figures & Solids of Revolution
Key Takeaways Explain This Topic AI
A planar cross section is the 2D intersection of a cutting plane with a 3D solid; for a convex polyhedron, the number of polygon edges cannot exceed the number of intersected faces.
Slicing a cube can generate triangles, quadrilaterals (squares, rectangles, trapezoids, rhombi), pentagons, and regular hexagons, but never polygons with 7 or more edges.
Planar slices of a cone generate the classic conic sections: circles (parallel to base), ellipses (closed oblique slice), parabolas (parallel to a slant generator), and hyperbolas (cutting both nappes of a double cone).
Solids of revolution result from rotating a planar region 360 degrees about a coplanar axis: rotating a rectangle yields a cylinder, a right triangle yields a cone, a semicircle yields a sphere, and a right trapezoid yields a conical frustum.
Pappus's Centroid Theorems connect rotational geometry to planar metrics: surface area equals A = 2 pi y_bar L and volume equals V = 2 pi y_bar A, where y_bar is the distance from the generator's centroid to the axis of rotation.
Last updated: September 2026
- 9.3 Cross Sections of 3D Figures & Solids of Revolution
- Geometry of Planar Cross Sections
A planar cross section is the two-dimensional geometric region formed by the intersection of a three-dimensional solid with a cutting plane. Cross-sectional analysis connects spatial geometry to multi-variable calculus, computer-aided design, and medical imaging (tomography).
The fundamental topological and geometric constraints governing cross sections include:
Dimensionality Reduction: Slicing an n n n -dimensional Euclidean object with an ( n − 1 ) (n-1) ( n − 1 ) -dimensional flat hyperplane produces an ( n − 1 ) (n-1) ( n − 1 ) -dimensional subset. In R 3 \mathbb{R}^3 R 3 , the intersection of a solid and a 2D plane is always a 2D planar figure (or degenerate 1D line segment/0D point if tangent).
Convex Polyhedron Face Constraint: If a convex polyhedron has F F F planar faces, any planar cross section can intersect at most F F F faces. Furthermore, because both the polyhedron faces and the cutting plane are flat, the intersection of the cutting plane with any single face is at most a single straight line segment. Therefore, the cross section of a convex polyhedron is always a convex polygon whose number of edges E slice E_{\text{slice}} E slice satisfies: 3 ≤ E slice ≤ F 3 \le E_{\text{slice}} \le F 3 ≤ E slice ≤ F
Cross Sections of Polyhedra: The Cube and Tetrahedron
Understanding how cutting planes intersect standard polyhedra is a benchmark skill on the FTCE Mathematics 6-12 examination:
Slicing a Solid Cube ( F = 6 F = 6 F = 6 ):
Triangles ( E slice = 3 E_{\text{slice}} = 3 E slice = 3 ): Formed when the cutting plane slices through three mutually adjacent faces meeting at a single corner. Slicing equidistant from the vertex produces an equilateral triangle; varying distances produce isosceles or scalene triangles.
Quadrilaterals ( E slice = 4 E_{\text{slice}} = 4 E slice = 4 ): Slicing parallel to any cube face yields a square. Slicing obliquely through four parallel lateral faces yields a non-square rectangle, a rhombus, or a general parallelogram. Slicing through opposite faces at non-parallel angles yields an isosceles trapezoid or general trapezoid.
Pentagons ( E slice = 5 E_{\text{slice}} = 5 E slice = 5 ): Formed when the cutting plane intersects exactly 5 faces of the cube, clipping five edges without intersecting the sixth face.
Hexagons ( E slice = 6 E_{\text{slice}} = 6 E slice = 6 ): Formed when the plane intersects all 6 faces of the cube. If the plane passes through the midpoints of six consecutive edges forming a non-coplanar closed cycle and passes through the cube's geometric center, the cross section is a perfect regular hexagon!
Heptagons ( E slice ≥ 7 E_{\text{slice}} \ge 7 E slice ≥ 7 ): Strictly impossible. Because a cube has exactly 6 faces and is convex, a flat plane cannot generate 7 or more edges.
Regular Tetrahedron ( F = 4 F = 4 F = 4 ): Can only produce triangles ( E slice = 3 E_{\text{slice}} = 3 E slice = 3 ) or quadrilaterals ( E slice = 4 E_{\text{slice}} = 4 E slice = 4 ). Remarkably, a plane passing symmetrically through four edges parallel to two opposite skew edges forms a square!
Cross Sections of Curved Solids: Cylinders, Cones, and Spheres
Right Circular Cylinder:
Parallel to base: Circle of radius r r r .
Oblique plane cutting through the lateral surface without intersecting bases: Ellipse.
Perpendicular to base (vertical cut through axis): Rectangle of dimensions 2 r × h 2r \times h 2 r × h (a square if h = 2 r h = 2r h = 2 r ).
Plane cutting through base and lateral wall: Truncated parabolic or hyperbolic segment.
Right Circular Cone and Conic Sections:
Parallel to base: Circle.
Tilted cutting plane through one nappe at an angle greater than the generator slant: Ellipse.
Plane parallel to exactly one generating line (element/slant edge) of the cone: Parabola.
Plane parallel to the cone's central vertical axis (or cutting both nappes of a double cone at an angle shallower than the generator): Hyperbola.
Degenerate cross sections passing through the apex: A single point (tangent to apex), a single straight line (tangent along a generator), or two intersecting lines (vertical plane passing through the apex, which for a single bounded cone appears as an isosceles triangle).
Sphere:
Every non-empty planar cross section of a sphere of radius R R R is ALWAYS a circle.
If the cutting plane passes through the sphere's center (distance d = 0 d = 0 d = 0 ), the cross section is a great circle of maximum radius r = R r = R r = R .
If the plane is at perpendicular distance d d d from the center ( 0 < d < R 0 < d < R 0 < d < R ), the cross section is a small circle with radius: r = R 2 − d 2 r = \sqrt{R^2 - d^2} r = R 2 − d 2
If d = R d = R d = R , the intersection is a single degenerate tangent point.
Solids of Revolution: Rotational Generation Mappings
A solid of revolution is a three-dimensional figure generated by revolving a two-dimensional planar region 360 ∘ 360^\circ 36 0 ∘ ( 2 π 2\pi 2 π radians) around an axis of coplanar rotation.
Standard Geometric Profiles:
Rectangle: Rotating a rectangle of dimensions r × h r \times h r × h around an axis containing one of its sides generates a right circular cylinder of radius r r r and height h h h .
Right Triangle: Rotating a right triangle with legs r r r and h h h around the leg of length h h h generates a right circular cone of base radius r r r , altitude h h h , and slant height l = r 2 + h 2 l = \sqrt{r^2 + h^2} l = r 2 + h 2 .
Semicircle: Rotating a semicircle of radius r r r around its bounding diameter generates a full sphere of radius r r r .
Right Trapezoid: Rotating a right trapezoid with parallel bases r r r and R R R around the leg perpendicular to the bases generates a conical frustum with base radii r r r and R R R .
Equilateral or Isosceles Triangle: Rotating around its altitude of symmetry yields a single cone. Rotating around its base yields a bicone (two identical cones joined base-to-base).
Quantitative Mensuration of Revolution Solids: Disk, Washer & Shell Methods
Calculus links cross-sectional geometry to rotational volume via single-variable integration:
Disk Method (Solid of Revolution without Hole): When the planar region bounded by y = f ( x ) ≥ 0 y = f(x) \ge 0 y = f ( x ) ≥ 0 , y = 0 y = 0 y = 0 , x = a x = a x = a , and x = b x = b x = b is revolved about the x-axis, each vertical strip of width d x dx d x sweeps out a circular disk of radius R ( x ) = f ( x ) R(x) = f(x) R ( x ) = f ( x ) and thickness d x dx d x : V = π ∫ a b [ f ( x ) ] 2 d x V = \pi \int_a^b [f(x)]^2 \, dx V = π ∫ a b [ f ( x ) ] 2 d x
Washer Method (Solid of Revolution with Central Void): When the region bounded between outer curve y = R ( x ) y = R(x) y = R ( x ) and inner curve y = r ( x ) y = r(x) y = r ( x ) is revolved about the x-axis, each vertical strip sweeps out an annular washer with outer radius R ( x ) R(x) R ( x ) and inner radius r ( x ) r(x) r ( x ) : V = π ∫ a b ( [ R ( x ) ] 2 − [ r ( x ) ] 2 ) d x V = \pi \int_a^b \left( [R(x)]^2 - [r(x)]^2 \right) dx V = π ∫ a b ( [ R ( x ) ] 2 − [ r ( x ) ] 2 ) d x
Cylindrical Shell Method: Revolving a region bounded by y = f ( x ) y = f(x) y = f ( x ) about the vertical y-axis decomposes the solid into concentric cylindrical shells of radius x x x , height f ( x ) f(x) f ( x ) , and thickness d x dx d x : V = 2 π ∫ a b x f ( x ) d x V = 2\pi \int_a^b x f(x) \, dx V = 2 π ∫ a b x f ( x ) d x
Pappus's Centroid Theorems for Rotational Mensuration
Pappus of Alexandria established two powerful theorems uniting rotational mensuration with planar centroids:
Pappus's First Theorem (Surface Area): The area A A A of a surface of revolution generated by revolving a plane curve C C C about a non-intersecting coplanar axis equals the product of the arc length L L L of C C C and the distance traveled by the centroid of C C C : A = 2 π y ˉ L A = 2\pi \bar{y} L A = 2 π y ˉ L
where y ˉ \bar{y} y ˉ is the perpendicular distance from the curve's centroid to the axis of rotation.
Pappus's Second Theorem (Volume): The volume V V V of a solid of revolution generated by revolving a plane region R R R about a non-intersecting coplanar axis equals the product of the area A A A of R R R and the distance traveled by the centroid of R R R : V = 2 π y ˉ A V = 2\pi \bar{y} A V = 2 π y ˉ A
where y ˉ \bar{y} y ˉ is the perpendicular distance from the region's centroid to the axis of rotation.
Worked Exemplar: Solid of Revolution Generated by a Trapezoid
Problem: A rectangular region with vertices at ( 2 , 0 ) (2, 0) ( 2 , 0 ) , ( 5 , 0 ) (5, 0) ( 5 , 0 ) , ( 5 , 4 ) (5, 4) ( 5 , 4 ) , and ( 2 , 4 ) (2, 4) ( 2 , 4 ) is revolved 360 ∘ 360^\circ 36 0 ∘ around the y-axis. Calculate the volume of the resulting three-dimensional solid using both the washer method and Pappus's Second Theorem.
Solution via Washer Method: The solid generated is a hollow circular cylinder (thick pipe) with outer radius R = 5 R = 5 R = 5 , inner radius r = 2 r = 2 r = 2 , and height h = 4 h = 4 h = 4 .
The horizontal cross section at any height y ∈ [ 0 , 4 ] y \in [0, 4] y ∈ [ 0 , 4 ] is a washer with area: A washer = π R 2 − π r 2 = π ( 5 2 − 2 2 ) = π ( 25 − 4 ) = 21 π A_{\text{washer}} = \pi R^2 - \pi r^2 = \pi(5^2 - 2^2) = \pi(25 - 4) = 21\pi A washer = π R 2 − π r 2 = π ( 5 2 − 2 2 ) = π ( 25 − 4 ) = 21 π
Integrating across height h = 4 h = 4 h = 4 : V = ∫ 0 4 21 π d y = 21 π × 4 = 84 π V = \int_0^4 21\pi \, dy = 21\pi \times 4 = 84\pi V = ∫ 0 4 21 π d y = 21 π × 4 = 84 π
Solution via Pappus's Second Theorem:
Area of the rectangle: width is 5 − 2 = 3 5 - 2 = 3 5 − 2 = 3 , height is 4 − 0 = 4 4 - 0 = 4 4 − 0 = 4 . Area A = 3 × 4 = 12 A = 3 \times 4 = 12 A = 3 × 4 = 12 .
Centroid of the rectangle: By symmetry, the x-coordinate of the centroid is the midpoint of the horizontal span: x ˉ = 2 + 5 2 = 3.5 \bar{x} = \frac{2 + 5}{2} = 3.5 x ˉ = 2 2 + 5 = 3.5
Distance traveled by the centroid during a 360 ∘ 360^\circ 36 0 ∘ rotation about the y-axis: d = 2 π x ˉ = 2 π ( 3.5 ) = 7 π d = 2\pi \bar{x} = 2\pi(3.5) = 7\pi d = 2 π x ˉ = 2 π ( 3.5 ) = 7 π
Volume by Pappus: V = 2 π x ˉ A = ( 7 π ) ( 12 ) = 84 π V = 2\pi \bar{x} A = (7\pi)(12) = 84\pi V = 2 π x ˉ A = ( 7 π ) ( 12 ) = 84 π
Both methods independently verify the identical volume of 84 π 84\pi 84 π .
- Cross-Section Slicing and Solid of Revolution Mapping Tables
- Planar Cross-Section Slices of Common 3D Figures
- Solid Figure Orientation / Cutting Plane Position Resulting 2D Cross Section Geometric / Algebraic Properties
- Cube Slicing 3 adjacent faces at a corner Triangle Equilateral if cuts are equidistant; scalene otherwise
- Cube Parallel to a face Square Congruent to cube faces
Cube Oblique cut through 4 parallel faces Rectangle / Parallelogram Non-square rectangle or rhombus depending on tilt
- Cube Cutting 5 faces Pentagon Asymmetric 5-sided convex polygon
- Cube Cutting all 6 faces through center Hexagon Regular hexagon when passing through midpoints
- Cylinder Parallel to circular base Circle Congruent to base of radius r r r
Cylinder Oblique cut not intersecting base Ellipse Major axis 2 a > 2 r 2a > 2r 2 a > 2 r , minor axis 2 b = 2 r 2b = 2r 2 b = 2 r
- Cylinder Perpendicular to base through center Rectangle Dimensions 2 r × h 2r \times h 2 r × h
- Cone Parallel to circular base Circle Radius scales linearly with distance from apex
- Cone Tilted through one nappe Ellipse Closed conic section
- Cone Parallel to one slant generator Parabola Open single-branched conic curve
- Cone Parallel to central vertical axis Hyperbola Intersects both nappes of double cone
Sphere Any non-empty plane at distance d ≤ R d \le R d ≤ R Circle Radius r = R 2 − d 2 r = \sqrt{R^2 - d^2} r = R 2 − d 2 ; great circle if d = 0 d = 0 d = 0
Solids of Revolution Rotation Mappings
2D Generating Shape Axis of Rotation Generated 3D Solid Resulting Metric Formulas
Rectangle ( w × h w \times h w × h ) Side of length h h h Right Circular Cylinder r = w r = w r = w , V = π w 2 h V = \pi w^2 h V = π w 2 h , S A = 2 π w 2 + 2 π w h SA = 2\pi w^2 + 2\pi w h S A = 2 π w 2 + 2 π w h
Right Triangle (legs a , b a, b a , b ) Leg of length b b b Right Circular Cone r = a r = a r = a , h = b h = b h = b , V = 1 3 π a 2 b V = \frac{1}{3}\pi a^2 b V = 3 1 π a 2 b , l = a 2 + b 2 l = \sqrt{a^2+b^2} l = a 2 + b 2
Semicircle (radius r r r ) Bounding diameter Sphere V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 π r 3 , S A = 4 π r 2 SA = 4\pi r^2 S A = 4 π r 2
Right Trapezoid (bases r , R r, R r , R ) Perpendicular leg h h h Conical Frustum V = 1 3 π h ( R 2 + R r + r 2 ) V = \frac{1}{3}\pi h(R^2 + Rr + r^2) V = 3 1 πh ( R 2 + R r + r 2 )
Circle (radius r r r ) Coplanar line distance R > r R > r R > r Torus (Donut) V = 2 π 2 R r 2 V = 2\pi^2 R r^2 V = 2 π 2 R r 2 , S A = 4 π 2 R r SA = 4\pi^2 R r S A = 4 π 2 R r (by Pappus)