Study guide

3.3 Ratios, Rates, Proportions, Percents & Measurement Conversions

FTCE Middle Grades Mathematics 5-9 025

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation & the Current Blueprint

1.1 Exam Facts, Format, Scoring & Calculator Policy 1.2 The Five-Competency Blueprint & How to Study It

2 Chapter 2: Number Sense and Operations

2.1 Comparing and Converting Rational Numbers 2.2 Rational-Number Operations & Multi-Step Order of Operations 2.3 Properties of Operations, Factors, GCF & LCM 2.4 Estimating Irrational Numbers and Square Roots

3 Chapter 3: Notation, Radicals & Proportional Reasoning

3.1 Scientific Notation & Significant Digits 3.2 Radicals, Rational Exponents & the Laws of Exponents 3.3 Ratios, Rates, Proportions, Percents & Measurement Conversions

4 Chapter 4: Patterns, Functions & Equivalent Expressions

4.1 Numerical and Algebraic Patterns, Sequences & Formulas 4.2 Relations, Functions, Function Notation & Function Families 4.3 Equivalent Expressions: Polynomials, Radical & Rational Expressions

5 Chapter 5: Linear Relationships, Inequalities & Absolute Value

5.1 Solving Linear Equations and Inequalities 5.2 Absolute Value Equations, Inequalities & the Absolute Value Function 5.3 Slope, Intercepts & Determining the Equation of a Line 5.4 Systems of Two-Variable Linear Equations & Inequalities

6 Chapter 6: Quadratic, Exponential & Transformed Functions

6.1 Key Features of Quadratic Functions: Intercepts, Vertex, Symmetry & Concavity 6.2 Solving Quadratics by Factoring, Square Roots & Completing the Square 6.3 The Quadratic Formula, the Discriminant & Quadratic Modeling 6.4 Exponential Growth and Decay: ab^x and a(1 + r)^x 6.5 Shifting and Scaling Transformations of Function Formulas

7 Chapter 7: Figures, Formulas & the Coordinate Plane

7.1 Classifying Triangles, Quadrilaterals & Solids by Defining Attributes 7.2 Perimeter, Circumference & Area of Plane and Composite Figures 7.3 Volume & Surface Area: Right Solids, Cavalieri's Principle & Nets 7.4 Problem Solving on the Coordinate Plane

8 Chapter 8: Angles, Triangles, Similarity & Circles

8.1 Angle Relationships, Parallel Lines & Polygon Angle Sums 8.2 The Triangle Inequality, the Pythagorean Theorem & Its Converse 8.3 Transformations, Congruence & Similarity Criteria 8.4 Proportional Relationships Between Similar 2-D and 3-D Figures 8.5 Circles: Center, Radius & the Equation of a Circle

9 Chapter 9: Describing & Displaying Data

9.1 Measures of Central Tendency & Measures of Variation 9.2 Data Displays & the Shape of Distributions

10 Chapter 10: Sampling, Association & Probability

10.1 Statistical Questions, Samples & Inferences About a Population 10.2 Estimating Population Totals, Means & Percentages from Survey Data 10.3 Bivariate Data: Scatter Plots, Correlation, Two-Way Tables & Linear Fits 10.4 Theoretical & Experimental Probability

11 Chapter 11: Mathematical Reasoning & Instructional Practice

11.1 Modeling Real-World Contexts Across Subject Areas 11.2 Instructional Methods for Strategies, Concepts, Procedures & Fluency 11.3 Reasonableness of Results & the Validity of Student Arguments 11.4 Mathematical Connections & Continuity Across Grade Levels

12 Chapter 12: Representations, Progressions & Assessment-Driven Instruction

12.1 Selecting Representations & Instructional Tools for All Students 12.2 Learning Progressions & the Concrete–Representational–Abstract Continuum 12.3 Analyzing Assessment Data to Guide Instruction & Differentiate 12.4 Diagnosing Misconceptions, Errors & Knowledge Gaps

3.3 Ratios, Rates, Proportions, Percents & Measurement Conversions

Key Takeaways Explain This Topic AI

A proportion is an equation of two equal ratios, and cross-multiplication is valid because it is multiplication of both sides by both denominators.

Percent change equals (new − old)/old × 100, always dividing by the original amount, which is why a 20% increase followed by a 20% decrease does not return to the starting value.

Dimensional analysis multiplies by conversion factors written as fractions equal to 1, arranged so unwanted units cancel.

Squared and cubed unit conversions require squaring or cubing the linear conversion factor: 1 yd² = 9 ft² and 1 yd³ = 27 ft³.

Exponential depreciation multiplies by (1 − r) each period, so a $24,000 vehicle losing 15% annually is worth 24,000(0.85)³ after three years, not 24,000 − 3(0.15)(24,000).

Last updated: September 2026

3.3 Ratios, Rates, Proportions, Percents & Measurement Conversions

Competency 1 skill 6 carries an unusually long list of contexts — mixtures, comparisons, rates, measurement conversions, graphs, percent growth, taxes, depreciation . Because Florida retired the standalone measurement competency, unit conversion now lives here , which makes this one of the highest-yield skills on the test.

Ratios and proportional set-up

A ratio compares two quantities, written a : b or a/b. A rate is a ratio of unlike units (miles per hour), and a unit rate has denominator 1.

A proportion asserts a/b = c/d. Cross-multiplying to ad = bc is not a trick; it is what you get by multiplying both sides by bd.

The critical discipline is consistent placement . If the left ratio is (miles)/(hours), the right ratio must also be (miles)/(hours) — not (hours)/(miles).

A recipe uses 3 cups of flour for every 4 cups of milk. How much flour for 14 cups of milk?

Set up flour/milk on both sides: 3/4 = x/14. Cross-multiply: 4x = 42, so x = 10.5 cups .

Part-to-part versus part-to-whole is the other set-up trap. If boys to girls is 3 : 5, then boys are 3/8 of the class, not 3/5. Any ratio a : b splits a whole into a + b parts.

A 48-student class has a boys-to-girls ratio of 3 : 5. Total parts = 8, so each part is 48/8 = 6 students. Boys = 3(6) = 18 , girls = 5(6) = 30 .

Scale factors and similar figures

A scale factor is a ratio of corresponding lengths. A map scale of 1 : 25,000 means 1 unit on the map is 25,000 of the same units in reality. If two triangles are similar with scale factor k, corresponding sides are in ratio k, areas are in ratio k², and volumes in ratio k³. That distinction is examined in the geometry competency as well and is developed further there.

The percent family

  • Question type Equation Example
  • Percent of a number part = percent × whole 18% of 250 = 45
  • What percent percent = part/whole 45 of 250 = 18%
  • Find the whole whole = part/percent 45 is 18% of 250
  • Percent increase (new − old)/old 40 → 50 is 25% increase
  • Percent decrease (old − new)/old 50 → 40 is 20% decrease

Note that 40 → 50 is a 25% increase while 50 → 40 is a 20% decrease, even though both involve the same 10 units. Percent change always divides by the original value , and the original changes depending on direction. This asymmetry is one of the most reliably tested ideas in the competency.

The consequence: a 20% increase followed by a 20% decrease does not restore the original. Starting at 100: 100(1.20) = 120, then 120(0.80) = 96. Successive percent changes multiply ; they do not add.

Tax, tip, discount, and markup are all one-step multiplications when you use the complement:

  • Add 7% sales tax: multiply by 1.07
  • Take 30% off: multiply by 0.70
  • Take 30% off, then 10% off the reduced price: multiply by 0.70 · 0.90 = 0.63, a 37% total discount , not 40%

Depreciation works the same way in reverse.

A $24,000 vehicle depreciates 15% per year. Value after 3 years = 24,000(0.85)³ = 24,000(0.614125) = $14,739 .

The distractor is always the simple-interest style answer, 24,000 − 3(0.15)(24,000) = $13,200. Exponential decay is not repeated subtraction of the original percentage.

Dimensional analysis

Write each conversion as a fraction equal to 1 and arrange so unwanted units cancel.

Convert 45 miles per hour to feet per second.

45 mi/hr × 5,280 ft/1 mi × 1 hr/3,600 s = (45 · 5,280)/3,600 ft/s = 237,600/3,600 = 66 ft/s

Miles cancel against miles; hours cancel against hours; feet and seconds survive in the right positions. +---------------------------------------------------------------------------+

  • | Conversions worth memorizing |
  • +---------------------------------------------------------------------------+
  • | LENGTH 1 ft = 12 in 1 yd = 3 ft 1 mi = 5,280 ft |
  • | 1 m = 100 cm 1 km = 1,000 m 1 in = 2.54 cm (exact) |
  • | MASS 1 lb = 16 oz 1 ton = 2,000 lb 1 kg = 1,000 g |
  • | VOLUME 1 cup = 8 fl oz 1 pt = 2 cups 1 qt = 2 pt 1 gal = 4 qt |
  • | 1 L = 1,000 mL 1 cm^3 = 1 mL |
  • | TIME 1 hr = 3,600 s 1 day = 86,400 s |
  • +---------------------------------------------------------------------------+

Metric prefixes are powers of ten: kilo- 10³, hecto- 10², deka- 10¹, base, deci- 10⁻¹, centi- 10⁻², milli- 10⁻³.

Squared and cubed units — the highest-value trap

Converting area or volume requires raising the linear factor to the same power.

Since 1 yd = 3 ft, squaring gives 1 yd² = 3² ft² = 9 ft² , and cubing gives 1 yd³ = 3³ ft³ = 27 ft³ .

A patio measures 12 ft by 15 ft = 180 ft². In square yards that is 180 ÷ 9 = 20 yd² , not 180 ÷ 3 = 60.

Similarly 1 m² = 10,000 cm² (since 100² = 10,000) and 1 m³ = 1,000,000 cm³. Candidates who divide by the linear factor are off by a factor of 3 for area and 9 for volume, and those wrong values are always among the options.

Reading proportional relationships from graphs

A relationship is proportional exactly when its graph is a straight line through the origin ; then y = kx and k is the constant of proportionality, readable as the y-value at x = 1 or as the slope. A line with a nonzero y-intercept, such as a plan with a $30 fee plus $5 per hour, is linear but not proportional — doubling the hours does not double the cost. Tables reveal the same distinction: if y/x is constant across every row, the relationship is proportional.