Study guide

6.5 Hairpieces, Wigs & Attachments

Georgia Barber License Barber II

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Georgia Barber II Exam Overview

1.1 What Is the Georgia Barber II License? 1.2 Exam Format, Fees & Scheduling 1.3 Eligibility, Training Hours & Applying for Your License

2 Georgia Barber Law & Board Regulations

2.1 Board Authority & OCGA Title 43 Chapter 10 2.2 School vs Apprenticeship & Hour Requirements 2.3 Examination, Renewal & Continuing Education 2.4 Unlawful Practice, Shop Licensing & Violations

3 Infection Control & Safety

3.1 Pathogens & Infection-Control Principles 3.2 Cleaning, Disinfecting & Sterilizing Implements 3.3 Bloodborne Pathogens, OSHA & Exposure Incidents 3.4 Shop Safety & Product/Chemical Handling

4 Hair, Scalp & Skin Science

4.1 Hair Structure, Composition & Growth Cycle 4.2 Scalp & Skin Disorders and Contraindications 4.3 Basic Chemistry: pH, Water & Product Types 4.4 Anatomy Essentials: Head, Face & Neck

5 Implements, Equipment & Client Consultation

5.1 Implements & Equipment: ID, Function & Care 5.2 Draping, Consultation, Contraindications & Records 5.3 Electrical Tools & Equipment Safety

6 Haircutting & Hair Design Services

6.1 Haircutting Fundamentals: Sectioning, Elevation & Tools 6.2 Clipper Cutting, Fades & Tapers 6.3 Scissor-Over-Comb, Texturizing & Finishing 6.4 Shampooing, Scalp Treatments & Basic Styling 6.5 Hairpieces, Wigs & Attachments

7 Shaving & Facial Hair Services

7.1 Straight-Razor Shaving: Prep, Technique & Safety 7.2 Beard & Mustache Design and Trimming 7.3 Facial Treatments & Waxing Within Barber II Scope

8 Professional Practice, Ethics & Barbershop Business

8.1 Ethics, Client Communication & Scope Boundaries 8.2 Shop Operations, Employment & Career Paths

6.5 Hairpieces, Wigs & Attachments

Key Takeaways Explain This Topic AI

Human-hair pieces tolerate moderate heat and restyling; most synthetic fibers melt or frizz under hot irons unless labeled heat-friendly

Coloring, lightening, perming, or relaxing a human-hair hairpiece is a chemical service outside Georgia Barber II scope

Size a client with circumference, front-to-nape, ear-to-ear over the top, and temple-to-temple measurements taken on the head

Attachment methods run from reversible (clip-on, wig grip, tape) to semi-permanent (sew-in/weave, integration); mechanical attachment is within Barber II scope

A worn hairpiece is a contaminated item: do not refit to another client or store on shared blocks without manufacturer-approved reconditioning and sanitation

Last updated: July 2026

6.5 Hairpieces, Wigs & Attachments

Quick Answer: Barber II candidates should know hairpiece materials (human hair vs synthetic), how to measure/size a client, common attachment methods (clip-on, wig grip, tape/adhesive, sew-in/weave, integration units), and the styling, cleaning, and sanitation rules for each. Barber II may fit and style non-chemical hairpieces; do not confuse attachment work with chemical services.

On the NIC Hair Care Services blueprint, hairpieces appear as their own sub-topic: materials (human or synthetic), sizing, attachment methods, styling, and maintenance. Georgia Barber II theory items can ask which fiber tolerates heat, which attachment is reversible, or how a used hairpiece must be handled between clients. Treat this as a small but distinct scoring pocket — easy points if you know the vocabulary.

Why Hairpieces Matter on the Theory Exam

Hairpieces and wigs restore length, density, or coverage after thinning, medical hair loss, or style choice. The written exam is less interested in artistic styling than in factual distinctions : fiber heat tolerance, sizing measurements, reversible vs semi-permanent attachment, and the infection-control status of a used hair addition. Learn the categories and the sanitation rule and you will answer most hairpiece items correctly.

Materials: Human Hair vs Synthetic

Property Human hair Synthetic (modacrylic / kanekalon / toyokalon)

Heat tolerance Tolerates thermal tools (with protectant) at moderate settings Low; many fibers melt or frizz under curling/flat irons unless labeled heat-friendly

Washing Mild shampoo, conditioner, air-dry preferred Mild synthetic wig shampoo, cool water, no rubbing/twisting, air-dry on a form

Styling memory Restyles like growing hair; holds set with product Often holds factory style; low manipulation needed

Cost / durability Higher cost, longer wear with care Lower cost, shorter service life, color-fast

Color Can be colored (chemical service — Master Barber scope, not Barber II) Pre-blended factory color; do not attempt dye

Exam trap: coloring, lightening, perming, or relaxing a human-hair piece is a chemical service outside Barber II scope. Selecting and attaching a piece is in scope; chemically altering it is not.

Sizing and Measuring the Client

A secure, natural hairpiece starts with correct measurements taken on the client's head with a flexible cloth tape:

Circumference — around the hairline at the widest point (nape to front hairline and back).

Front-to-nape — center of the front hairline down to the nape hairline.

Ear-to-ear (over the top) — one temple across the crown to the other temple.

Temple-to-temple (around the back) — temple around the occipital bone to the other temple.

Sideburn-to-sideburn across the nape when fitting full-caps or toupees.

Cap construction sizes are listed by these measurements; a piece measured too large shifts and lifts, one too small pinches and gaps. Record measurements on the client's record, not from memory.

Attachment Methods

Method How it attaches Reversibility / exam note

Clip-on / clip-in Pressure-sensitive comb clips snap onto existing hair Fully reversible; daily on/off; needs anchor hair

Wig grip / grip band Velvet or silicone band holds the cap by friction Reversible; no adhesive; gentle on edges

Tape (adhesive) Double-sided wig tape to skin/clean hairline Reversible but skin-contact; patch-test for sensitivity

  • Liquid adhesive Skin-safe bond to the hairline Semi-permanent; follow manufacturer removal solvent
  • Sew-in / weave Tracks sewn to braided natural hair Semi-permanent; requires braiding base; tension awareness

Integration / wig unit Hair pulled through a mesh base, blended with the piece Semi-permanent; blending, not bonding

Barber II scope note: attachment itself (clips, grips, tape, sewing) is mechanical, not a chemical service, so it is within the no-chemical license. Be careful, however, with strong chemical bond solvents or any adhesive product whose use requires a chemical reaction or scalp chemistry change — when in doubt, follow manufacturer instructions and your scope boundaries.

Styling a Hairpiece

Brush synthetic hair with a wig brush (looped or wide-spaced bristles) to avoid pulling fibers; minimize heat.

Use low/no heat on standard synthetic; only heat-friendly fibers may take a warm (not hot) iron.

Human-hair pieces: thermal tools with thermal protectant and moderate temperature, like client hair.

Style on a block/stand or on the client without tension that shifts the hairline.

Keep clippers and trimmers away from cap mesh and tracks; cut and blend the visible hair only.

Cleaning, Maintenance, and Sanitation

Sanitation is where a hairpiece item becomes an infection-control question:

A used hairpiece that has been worn against a client's skin or hair is a soiled/contaminated item . Do not place it back on a shared block or fit it to another client without proper manufacturer-cleared reconditioning.

Follow manufacturer instructions for shampooing synthetic (cool water, mild synthetic shampoo, blot, air-dry on a stand) vs human-hair pieces.

Store on a wig stand or in its box to hold shape; keep out of direct heat and sunlight.

Comb and detangle from ends toward base to limit shedding.

Single-use adhesives, tapes, and applicators are discarded after one client; never reuse skin-contact adhesive strips.

Keep records of fit, measurements, and product used on the client's consultation record.

If a client has a scalp infection, open sores, or undiagnosed lesions under the hairpiece area, stop the fitting/styling service and refer — do not fit over a contra-indicated scalp.

Quick Exam Recap

Human hair tolerates heat and restyling; synthetic fibers usually do not tolerate high heat.

Coloring or perming a human-hair piece is a chemical service — outside Barber II scope.

Measure circumference, front-to-nape, and ear-to-ear for sizing.

Clip-on, wig grip, and tape are reversible; sew-in and integration are semi-permanent.

A used hairpiece is a contaminated item : do not share, refit, or store on shared blocks without proper reconditioning and manufacturer-approved sanitation.