Study guide

0.1 Official Exam Facts, Content Outlines & Approved References

Georgia General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Exam Orientation, Blueprint & Open-Book Method

0.1 Official Exam Facts, Content Outlines & Approved References 0.2 Open-Book Navigation, Reference Indexing & Study Plan

2 Chapter 1: Georgia Contractor Licensing & Regulatory Law

1.1 Board Authority & Commercial General Contractor Tiers 1.2 Scope, Exemptions & Unlicensed Contracting 1.3 Eligibility, Experience Requirements & Qualifying Agents 1.4 Financial Responsibility, Net Worth, Surety Bonds & Insurance 1.5 License Renewal, No-CE Rule & Disciplinary Actions

3 Chapter 2: Georgia Construction & Lien Law

2.1 Georgia Mechanics & Materialmen's Liens 2.2 Project Notices: Notice of Commencement, Notice to Contractor & Preliminary Notice 2.3 Statutory Lien Waivers & Affidavits of Nonpayment 2.4 Georgia Prompt Pay Act & Right to Repair Act

4 Chapter 3: Business Organization, Financial Management & Taxes

3.1 Business Entity Selection & Joint Ventures 3.2 Georgia Entity Registration, Foreign Qualification & Trade Names 3.3 Construction Accounting, WIP & Financial Statements 3.4 Cash Flow, Working Capital & Construction Banking 3.5 Federal, Georgia & Payroll Tax Administration 3.6 Worker Classification, Wage-and-Hour & Prevailing Wage

5 Chapter 4: Construction Contracts, Bidding & Risk Management

4.1 Contract Pricing Models & Cost Risk 4.2 Project Delivery Methods & Responsibility 4.3 Essential Contract Clauses & Risk Allocation 4.4 Standard Documents: AIA, ConsensusDocs & EJCDC 4.5 Quantity Takeoff, Direct Cost & Markup 4.6 Bid Scope Review, Submission & Withdrawal 4.7 Surety Bonds, Insurance & Risk Management

6 Chapter 5: Project Management, Scheduling & Quality Control

5.1 Project Planning, WBS, Logic & Resources 5.2 CPM, Float, Updating & Schedule Compression 5.3 Project Administration, Submittals, RFIs & Records 5.4 Changes, Delays, Claims & Dispute Resolution 5.5 QA/QC, Special Inspections & Closeout

7 Chapter 6: Georgia Building Codes, Environmental Regulations & Site Work

6.1 Current Georgia Codes, Amendments, Permits & Inspections 6.2 Occupancy, Construction Type, Egress & Accessibility 6.3 GESA, NPDES, Buffers, BMPs & Certified Personnel 6.4 Survey Control, Layout, Clearing & Site Preparation 6.5 Excavation, Earthwork Volumes, Hauling & Compaction 6.6 Shallow Foundations, Slabs, Deep Systems & Drainage

8 Chapter 7: Concrete & Masonry Construction

7.1 Concrete Materials, Mix Design & Field Testing 7.2 Concrete Placement, Hot/Cold Weather, Curing & Defects 7.3 Formwork, Shores, Reshores & Removal 7.4 Reinforcing Steel, Splices & Post-Tensioning 7.5 Masonry Units, Mortar, Grout & Testing 7.6 Masonry Walls, Reinforcement, Flashing & Movement Joints

9 Chapter 8: Structural Steel, Metals & Framing Systems

8.1 Structural Steel Shapes, Framing & Erection Stability 8.2 Bolted Connections, Welding & Nondestructive Testing 8.3 Steel Joists, Deck & Cold-Formed Framing 8.4 Heavy Timber, Fire Performance & Mass Timber 8.5 Engineered Wood, I-Joists, Trusses & Connectors 8.6 Wood Framing, Sheathing, Bracing & Fastening

10 Chapter 9: Building Envelope, Thermal & Moisture Protection, Doors & Windows

9.1 Low-Slope Roofing, Insulation & Drainage 9.2 Steep-Slope Roofing, Sheet Metal & Flashing 9.3 Insulation, Air Barriers & Vapor Control 9.4 Commercial Doors, Frames, Hardware & Fire Assemblies 9.5 Windows, Storefronts & Curtain Walls 9.6 Insulating Glass, Safety Glazing & Water Control

11 Chapter 10: Finishes, Mechanical, Electrical & Plumbing Coordination

10.1 Gypsum Assemblies, Ceilings & Finish Coordination 10.2 Concrete Moisture, Flooring & Tile Assemblies 10.3 HVAC, Ductwork, Dampers & Mechanical Coordination 10.4 Plumbing, DWV, Venting & Backflow 10.5 Fire Sprinklers, Standpipes & Fire Department Connections 10.6 Electrical Distribution, Grounding & Emergency Systems

12 Chapter 11: Construction Safety & OSHA Standards (29 CFR Part 1926)

11.1 OSHA Authority, Inspections, Reporting & Multi-Employer Sites 11.2 Fall Protection, Clearance Planning & Scaffolds 11.3 Excavation, Protective Systems & Trench Safety 11.4 Hazard Communication, Silica, Temporary Power & PPE 11.5 Cranes, Rigging, Signal Persons & Power-Line Safety

0.1 Official Exam Facts, Content Outlines & Approved References

Key Takeaways Explain This Topic AI

The Georgia credential requires separate passing results on the 50-item Georgia Business and Law examination and the 115-item NASCLA Accredited Commercial General Building examination.

The current passing standards are 35 of 50 and 81 of 115 scored questions; both examinations are open book but only the references approved for that examination may enter the room.

PSI may add unscored experimental questions, so the number presented can exceed the published scored-item count and those questions still consume testing time.

Board approval comes before scheduling, and the approval letter is valid for one year.

Last updated: August 2026

0.1 Official Exam Facts, Content Outlines & Approved References

The Georgia General Contractor credential is not earned through one 100-question test. The current Georgia PSI Candidate Information Bulletin, updated April 28, 2025 and still published by PSI, requires candidates for both the unlimited General Contractor and General Contractor Limited Tier classifications to pass two separate examinations after the General Contractor Division approves the application. Treat them as separate testing events with separate fees, reference lists, score reports, and time budgets.

Current testing facts

  • Examination Scored questions Passing result Time Current PSI fee Delivery
  • Georgia Business and Law 50 35 correct, or 70% 120 minutes $60 Open book
  • NASCLA Accredited Commercial General Building 115 81 correct, or 70% 330 minutes $106 Open book

Together, the two scored outlines contain 165 questions and 450 minutes . Do not combine the scores: a strong NASCLA result cannot offset a failed Business and Law result. PSI may include approximately 1 to 10 experimental questions, generally not more than about ten percent of an examination. Experimental questions are not identified or scored, but they count against the clock. Answer every item and use the published scored counts only for study allocation.

Georgia Business and Law outline

The official 50-item allocation is exact: Licensing, 5; Estimating and Bidding, 7; Business Organization and Financial Management, 7; Tax Laws, 5; Labor Laws, 5; Project Management and Lien Law, 6; Contracts, 6; Risk Management, 4; and Environmental and Safety Laws, 5. These counts show why a candidate cannot prepare only from licensing statutes. Estimating, business finance, project administration, liens, and contracts together dominate the state examination.

NASCLA Commercial General Building outline

The official 115-item allocation is: General Requirements, 25; Site Construction, 15; Concrete, 6; Masonry, 4; Metals, 6; Wood, 5; Thermal and Moisture Protection, 5; Doors, Windows, and Glazing, 4; Finishes, 5; Mechanical and Plumbing Systems, 6; Electrical Systems, 3; and Procurement and Contracting Requirements, 31. Procurement and Contracting plus General Requirements account for 56 scored items. Site work is the third-largest area. The remaining construction divisions are individually smaller but collectively material, so skipping a four- or five-item division is a poor risk decision.

Approval, attempts, and score reporting

Apply through the Georgia Secretary of State licensing process and wait for written Board approval before attempting to schedule. PSI states that the approval is valid for one year and both required examinations must be passed within that approval period. The first approval permits two attempts. A candidate requesting a third or later attempt must wait at least one calendar year after the last examination and submit a new application with the required fees. Use the current approval letter if its instructions differ from an older FAQ or prep provider.

PSI reports the result after testing. A failing report is diagnostic evidence: rebuild the weak content area and the reference index before rescheduling. Because the test is open book, a failure usually reflects knowledge, navigation, or time management rather than lack of access to text.

Test-day controls

Register and schedule with PSI online or by telephone after approval. The current bulletin requires cancellation or rescheduling at least two days before the appointment to avoid forfeiting the fee. Arrive about 30 minutes early with one current government-issued identification bearing a photograph and signature. Candidate-supplied approved books may be highlighted, underlined, indexed, and fitted with permanent tabs. Temporary tabs, sticky notes, Post-it notes, loose papers, writing in the testing room, and unapproved references are prohibited. Only a silent, nonprinting, nonprogrammable calculator is allowed.

The candidate—not PSI—supplies the permitted references. Verify the edition alternatives against the current bulletin before buying or tabbing books. The Business and Law exam permits the Georgia-NASCLA Contractors Guide to Business, Law and Project Management, Third Edition. The NASCLA bulletin publishes a longer technical list and allows specified edition alternatives for several titles, including 2021 or 2024 IBC and ACI 318-14 or ACI 318-19 (2022). The approved-reference list is an admission list, not a claim that every current Georgia field code uses the same edition.

Edition-control checkpoint

Before registration, compare the title page and edition of every book with the current PSI list. Several NASCLA references have alternatives, but an edition not listed is not made admissible merely because it is newer. Conversely, the books admitted to the examination do not freeze Georgia field requirements. Record the date you checked the bulletin and recheck after any reschedule.