Study guide

0.2 Open-Book Navigation, Reference Indexing & Study Plan

Georgia General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Exam Orientation, Blueprint & Open-Book Method

0.1 Official Exam Facts, Content Outlines & Approved References 0.2 Open-Book Navigation, Reference Indexing & Study Plan

2 Chapter 1: Georgia Contractor Licensing & Regulatory Law

1.1 Board Authority & Commercial General Contractor Tiers 1.2 Scope, Exemptions & Unlicensed Contracting 1.3 Eligibility, Experience Requirements & Qualifying Agents 1.4 Financial Responsibility, Net Worth, Surety Bonds & Insurance 1.5 License Renewal, No-CE Rule & Disciplinary Actions

3 Chapter 2: Georgia Construction & Lien Law

2.1 Georgia Mechanics & Materialmen's Liens 2.2 Project Notices: Notice of Commencement, Notice to Contractor & Preliminary Notice 2.3 Statutory Lien Waivers & Affidavits of Nonpayment 2.4 Georgia Prompt Pay Act & Right to Repair Act

4 Chapter 3: Business Organization, Financial Management & Taxes

3.1 Business Entity Selection & Joint Ventures 3.2 Georgia Entity Registration, Foreign Qualification & Trade Names 3.3 Construction Accounting, WIP & Financial Statements 3.4 Cash Flow, Working Capital & Construction Banking 3.5 Federal, Georgia & Payroll Tax Administration 3.6 Worker Classification, Wage-and-Hour & Prevailing Wage

5 Chapter 4: Construction Contracts, Bidding & Risk Management

4.1 Contract Pricing Models & Cost Risk 4.2 Project Delivery Methods & Responsibility 4.3 Essential Contract Clauses & Risk Allocation 4.4 Standard Documents: AIA, ConsensusDocs & EJCDC 4.5 Quantity Takeoff, Direct Cost & Markup 4.6 Bid Scope Review, Submission & Withdrawal 4.7 Surety Bonds, Insurance & Risk Management

6 Chapter 5: Project Management, Scheduling & Quality Control

5.1 Project Planning, WBS, Logic & Resources 5.2 CPM, Float, Updating & Schedule Compression 5.3 Project Administration, Submittals, RFIs & Records 5.4 Changes, Delays, Claims & Dispute Resolution 5.5 QA/QC, Special Inspections & Closeout

7 Chapter 6: Georgia Building Codes, Environmental Regulations & Site Work

6.1 Current Georgia Codes, Amendments, Permits & Inspections 6.2 Occupancy, Construction Type, Egress & Accessibility 6.3 GESA, NPDES, Buffers, BMPs & Certified Personnel 6.4 Survey Control, Layout, Clearing & Site Preparation 6.5 Excavation, Earthwork Volumes, Hauling & Compaction 6.6 Shallow Foundations, Slabs, Deep Systems & Drainage

8 Chapter 7: Concrete & Masonry Construction

7.1 Concrete Materials, Mix Design & Field Testing 7.2 Concrete Placement, Hot/Cold Weather, Curing & Defects 7.3 Formwork, Shores, Reshores & Removal 7.4 Reinforcing Steel, Splices & Post-Tensioning 7.5 Masonry Units, Mortar, Grout & Testing 7.6 Masonry Walls, Reinforcement, Flashing & Movement Joints

9 Chapter 8: Structural Steel, Metals & Framing Systems

8.1 Structural Steel Shapes, Framing & Erection Stability 8.2 Bolted Connections, Welding & Nondestructive Testing 8.3 Steel Joists, Deck & Cold-Formed Framing 8.4 Heavy Timber, Fire Performance & Mass Timber 8.5 Engineered Wood, I-Joists, Trusses & Connectors 8.6 Wood Framing, Sheathing, Bracing & Fastening

10 Chapter 9: Building Envelope, Thermal & Moisture Protection, Doors & Windows

9.1 Low-Slope Roofing, Insulation & Drainage 9.2 Steep-Slope Roofing, Sheet Metal & Flashing 9.3 Insulation, Air Barriers & Vapor Control 9.4 Commercial Doors, Frames, Hardware & Fire Assemblies 9.5 Windows, Storefronts & Curtain Walls 9.6 Insulating Glass, Safety Glazing & Water Control

11 Chapter 10: Finishes, Mechanical, Electrical & Plumbing Coordination

10.1 Gypsum Assemblies, Ceilings & Finish Coordination 10.2 Concrete Moisture, Flooring & Tile Assemblies 10.3 HVAC, Ductwork, Dampers & Mechanical Coordination 10.4 Plumbing, DWV, Venting & Backflow 10.5 Fire Sprinklers, Standpipes & Fire Department Connections 10.6 Electrical Distribution, Grounding & Emergency Systems

12 Chapter 11: Construction Safety & OSHA Standards (29 CFR Part 1926)

11.1 OSHA Authority, Inspections, Reporting & Multi-Employer Sites 11.2 Fall Protection, Clearance Planning & Scaffolds 11.3 Excavation, Protective Systems & Trench Safety 11.4 Hazard Communication, Silica, Temporary Power & PPE 11.5 Cranes, Rigging, Signal Persons & Power-Line Safety

0.2 Open-Book Navigation, Reference Indexing & Study Plan

Key Takeaways Explain This Topic AI

Open book does not mean lookup every item; first-pass recall protects the time needed for calculations and exact-rule questions.

Permanent tabs should follow the official outline and book structure, while a handwritten or printed loose index cannot enter the room.

A two-pass method separates immediate answers from controlled lookups and prevents one difficult item from consuming several later opportunities.

Study hours should follow published item counts and personal diagnostic weakness, not chapter length alone.

Last updated: August 2026

0.2 Open-Book Navigation, Reference Indexing & Study Plan

An open-book contractor examination rewards candidates who already understand the rule and can locate the controlling table, definition, or exception quickly. It punishes the strategy of reading the reference for the first time at the testing center. Build two abilities in parallel: concept recall and reference navigation.

Create a lawful navigation system

Start with the exact edition of each reference that PSI allows. Write the examination name on a removable cover used only during study, but do not bring prohibited loose material into the room. Place permanent tabs at high-value divisions and tables, using short labels that match the official outline: licensing, liens, waivers, prompt pay, tax, labor, contracts, bonds, scheduling, site work, concrete, masonry, metals, wood, envelope, finishes, MEP, electrical, and OSHA. For a code, tab the index, definitions, occupancy, construction type, means of egress, accessibility, fire-resistance, structural, special inspections, soils and foundations, and materials chapters.

Do not over-tab. A forest of nearly identical tabs slows visual selection. Use a consistent color system by book or major topic and preserve the printed index as the final search tool. PSI allows highlighting, underlining, indexing, and permanent tabs, but not temporary tabs or loose paper. Any notes made in a reference should support navigation, not attempt to reproduce a prohibited answer sheet.

Match study effort to the official allocation

For Business and Law, give the most time to Estimating and Bidding and Business Organization and Financial Management, then Project Management and Lien Law and Contracts. Continue with Licensing, Tax, Labor, and Environmental and Safety; do not neglect four-item Risk Management. For NASCLA, lead with Procurement and Contracting, General Requirements, and Site Construction. Those three areas contain 71 of 115 scored questions. Rotate through the remaining nine construction divisions so that every official topic receives instruction and retrieval practice.

Use a simple allocation formula: published items multiplied by a weakness factor. A topic at full diagnostic strength can use factor 1.0; a topic below 70 percent can use 1.5; an unfamiliar topic can use 2.0. Normalize the results into available hours. This method protects high-weight areas while deliberately correcting personal weaknesses.

Use two passes under the clock

The Business and Law pace is about 2.4 minutes per scored item; NASCLA provides about 2.87 minutes per scored item. Experimental questions reduce the practical cushion. On the first pass, answer items supported by confident recall or a lookup that can be completed almost immediately. Mark uncertain items and move on. On the second pass, use the reference index and tabs for exact statutory deadlines, code tables, formulas, and exceptions. Reserve the final minutes to ensure every item is answered.

For a lookup, extract two or three discriminating nouns from the question. A lien question may turn on first furnishing versus last furnishing; an OSHA question may turn on scaffold versus steel erection; a code question may turn on occupancy versus construction type. Go to the correct reference, then its index, then the controlling section. Read enough surrounding text to catch exceptions and definitions. Do not choose an option merely because its number appears in the book.

Practice calculations as written procedures

Write the formula from memory during study, identify units, substitute values, and perform a reasonableness check. Typical contractor calculations include cubic yards, board feet, productivity, labor burden, markup versus margin, current ratio, working capital, cost-to-complete, earned value, float, voltage and current, and load radius. Calculator fluency matters, but setup errors cause more misses than arithmetic.

Build a weekly cycle

Use five stages: learn, retrieve, navigate, calculate, and simulate. Learn one official topic from this guide and the approved reference. Close the book and retrieve the rule. Reopen the book and time the lookup. Work mixed calculations without cues. End the week with a timed mixed set using only permitted materials. Record the reason for every miss: knowledge gap, wrong reference, slow navigation, exception missed, unit error, or careless reading.

The final simulations should mimic each examination separately. A combined practice set hides pacing differences and encourages the false idea that one score can offset the other. Stop adding tabs shortly before test day; use the final sessions to stabilize the system you will actually use.

Final readiness rule

Schedule only after two separate timed simulations meet the passing standard with margin. Require at least 80 percent in each outline, complete every lookup within the planned time, and explain every answer without relying on its option letter. This buffer accounts for experimental items, fatigue, and a live form that emphasizes different details.

Fast lookup routing table

Question cue First reference destination Confirm before answering

Georgia qualifier, tier, renewal, or discipline Commercial Board statute/rules Actor, classification, current rule chapter

  • Exam appointment, fee, book, or test-room item Current PSI bulletin Which of the two exams and bulletin date
  • Lien deadline or notice Current Georgia statute First versus last furnishing and claimant tier
  • Building-system requirement Permitted exam code/reference Edition, occupancy, exception, Georgia amendment
  • Jobsite hazard 29 CFR Part 1926 Operation-specific subpart and trigger