Study guide

6.1 Current Georgia Codes, Amendments, Permits & Inspections

Georgia General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Exam Orientation, Blueprint & Open-Book Method

0.1 Official Exam Facts, Content Outlines & Approved References 0.2 Open-Book Navigation, Reference Indexing & Study Plan

2 Chapter 1: Georgia Contractor Licensing & Regulatory Law

1.1 Board Authority & Commercial General Contractor Tiers 1.2 Scope, Exemptions & Unlicensed Contracting 1.3 Eligibility, Experience Requirements & Qualifying Agents 1.4 Financial Responsibility, Net Worth, Surety Bonds & Insurance 1.5 License Renewal, No-CE Rule & Disciplinary Actions

3 Chapter 2: Georgia Construction & Lien Law

2.1 Georgia Mechanics & Materialmen's Liens 2.2 Project Notices: Notice of Commencement, Notice to Contractor & Preliminary Notice 2.3 Statutory Lien Waivers & Affidavits of Nonpayment 2.4 Georgia Prompt Pay Act & Right to Repair Act

4 Chapter 3: Business Organization, Financial Management & Taxes

3.1 Business Entity Selection & Joint Ventures 3.2 Georgia Entity Registration, Foreign Qualification & Trade Names 3.3 Construction Accounting, WIP & Financial Statements 3.4 Cash Flow, Working Capital & Construction Banking 3.5 Federal, Georgia & Payroll Tax Administration 3.6 Worker Classification, Wage-and-Hour & Prevailing Wage

5 Chapter 4: Construction Contracts, Bidding & Risk Management

4.1 Contract Pricing Models & Cost Risk 4.2 Project Delivery Methods & Responsibility 4.3 Essential Contract Clauses & Risk Allocation 4.4 Standard Documents: AIA, ConsensusDocs & EJCDC 4.5 Quantity Takeoff, Direct Cost & Markup 4.6 Bid Scope Review, Submission & Withdrawal 4.7 Surety Bonds, Insurance & Risk Management

6 Chapter 5: Project Management, Scheduling & Quality Control

5.1 Project Planning, WBS, Logic & Resources 5.2 CPM, Float, Updating & Schedule Compression 5.3 Project Administration, Submittals, RFIs & Records 5.4 Changes, Delays, Claims & Dispute Resolution 5.5 QA/QC, Special Inspections & Closeout

7 Chapter 6: Georgia Building Codes, Environmental Regulations & Site Work

6.1 Current Georgia Codes, Amendments, Permits & Inspections 6.2 Occupancy, Construction Type, Egress & Accessibility 6.3 GESA, NPDES, Buffers, BMPs & Certified Personnel 6.4 Survey Control, Layout, Clearing & Site Preparation 6.5 Excavation, Earthwork Volumes, Hauling & Compaction 6.6 Shallow Foundations, Slabs, Deep Systems & Drainage

8 Chapter 7: Concrete & Masonry Construction

7.1 Concrete Materials, Mix Design & Field Testing 7.2 Concrete Placement, Hot/Cold Weather, Curing & Defects 7.3 Formwork, Shores, Reshores & Removal 7.4 Reinforcing Steel, Splices & Post-Tensioning 7.5 Masonry Units, Mortar, Grout & Testing 7.6 Masonry Walls, Reinforcement, Flashing & Movement Joints

9 Chapter 8: Structural Steel, Metals & Framing Systems

8.1 Structural Steel Shapes, Framing & Erection Stability 8.2 Bolted Connections, Welding & Nondestructive Testing 8.3 Steel Joists, Deck & Cold-Formed Framing 8.4 Heavy Timber, Fire Performance & Mass Timber 8.5 Engineered Wood, I-Joists, Trusses & Connectors 8.6 Wood Framing, Sheathing, Bracing & Fastening

10 Chapter 9: Building Envelope, Thermal & Moisture Protection, Doors & Windows

9.1 Low-Slope Roofing, Insulation & Drainage 9.2 Steep-Slope Roofing, Sheet Metal & Flashing 9.3 Insulation, Air Barriers & Vapor Control 9.4 Commercial Doors, Frames, Hardware & Fire Assemblies 9.5 Windows, Storefronts & Curtain Walls 9.6 Insulating Glass, Safety Glazing & Water Control

11 Chapter 10: Finishes, Mechanical, Electrical & Plumbing Coordination

10.1 Gypsum Assemblies, Ceilings & Finish Coordination 10.2 Concrete Moisture, Flooring & Tile Assemblies 10.3 HVAC, Ductwork, Dampers & Mechanical Coordination 10.4 Plumbing, DWV, Venting & Backflow 10.5 Fire Sprinklers, Standpipes & Fire Department Connections 10.6 Electrical Distribution, Grounding & Emergency Systems

12 Chapter 11: Construction Safety & OSHA Standards (29 CFR Part 1926)

11.1 OSHA Authority, Inspections, Reporting & Multi-Employer Sites 11.2 Fall Protection, Clearance Planning & Scaffolds 11.3 Excavation, Protective Systems & Trench Safety 11.4 Hazard Communication, Silica, Temporary Power & PPE 11.5 Cranes, Rigging, Signal Persons & Power-Line Safety

6.1 Current Georgia Codes, Amendments, Permits & Inspections

Key Takeaways Explain This Topic AI

Georgia moved most mandatory construction codes to the 2024 ICC editions on January 1, 2026; the electrical code is the 2023 NEC and the energy code remains the amended 2015 IECC.

Georgia amendments and State Fire Marshal requirements must be read with the model code.

Mandatory state minimum codes apply statewide, while listed permissive codes require local adoption.

A state contractor license does not replace local permits, trade permits, inspections, or a certificate of occupancy.

Last updated: August 2026

6.1 Current Georgia Codes, Amendments, Permits & Inspections

Georgia adopts state minimum construction codes through the Department of Community Affairs. Effective January 1, 2026, most mandatory model codes advanced to the 2024 ICC family. An examination reference edition and the code governing current field work can differ: the current NASCLA bulletin permits specified reference editions, while a Georgia project must follow the code legally adopted for that project, the Georgia amendments, and applicable local and fire-safety requirements.

Current mandatory state minimum codes

  • Subject Current Georgia base edition
  • Building 2024 International Building Code with 2026 Georgia amendments
  • Residential 2024 International Residential Code with 2026 Georgia amendments
  • Fire 2024 International Fire Code, coordinated with State Fire Marshal requirements
  • Plumbing 2024 International Plumbing Code with 2026 Georgia amendments
  • Mechanical 2024 International Mechanical Code with 2026 Georgia amendments
  • Fuel gas 2024 International Fuel Gas Code with 2026 Georgia amendments
  • Electrical 2023 National Electrical Code with 2026 Georgia amendments
  • Swimming pools and spas 2024 International Swimming Pool and Spa Code with 2026 Georgia amendments
  • Energy 2015 International Energy Conservation Code with Georgia supplements and amendments

Do not assume that every line advanced to a 2024 model edition. Georgia's current commercial energy path remains the amended 2015 IECC; the DCA amendments identify available compliance paths such as COMcheck and the referenced ASHRAE 90.1 edition. For fire and life safety and accessibility, coordinate DCA codes with the Georgia Safety Fire Commissioner rules and the project authority having jurisdiction.

Georgia also lists permissive state minimum codes, including the 2018 International Property Maintenance Code, 2018 International Existing Building Code, and 2008 National Green Building Standard with Georgia amendments. A permissive code becomes enforceable through local adoption. A mandatory code applies statewide, although a local government may administer and enforce it. Local amendments must satisfy state law and cannot be assumed from a neighboring jurisdiction.

Resolve the governing rule

Begin with the adopted base code, then apply Georgia amendments, State Fire Marshal rules where applicable, and valid local requirements. Project documents can exceed code minimums. When a specification is more stringent and lawful, it remains a contract requirement even if the building official would accept the code minimum. Send conflicts to the design professional and authority having jurisdiction; a contractor should not silently choose the cheaper interpretation.

Permit workflow

Confirm zoning and site approvals before treating a building permit as the only gate. A typical commercial workflow includes plan preparation and professional seals, plan review, building and separate trade permits, permit issuance, required notices, inspections, correction notices, tests and special inspections, final approvals, and certificate of occupancy. Land-disturbance, stormwater, driveway, utility, fire, elevator, or health approvals may run on separate tracks.

Inspections do not transfer the contractor's quality responsibility to the government. Schedule inspections at required milestones and before concealment. Common checkpoints include footing and reinforcing, under-slab utilities, foundation, framing, rough MEP, fire-stopping, energy components, ceiling close-in, fire and life-safety systems, accessibility, finals, and site completion. The permit documents and local inspection card control the actual sequence.

The certificate of occupancy authorizes occupancy after required approvals. A temporary certificate may allow restricted occupancy subject to stated conditions and expiration. Neither one is a warranty that all contract work is complete. Keep permit cards, approved drawings, inspection reports, testing and special-inspection records, certificates, and closeout approvals in the permanent project file.

Existing-building and edition questions

An alteration can invoke the existing-building provisions, the building code, accessibility rules, fire code, energy provisions, and local ordinances together. Determine whether the jurisdiction adopted the permissive IEBC and which compliance method the design uses. Do not assume that calling work a repair eliminates permits or upgrades.

At project start, place an edition matrix on the code sheet: base code, Georgia amendment date, fire and accessibility rules, referenced standards, local amendments, and permit issue date. Reconfirm after redesign or a long delay because the applicable edition can depend on adoption and permit rules. A contractor preparing for NASCLA should answer from the permitted exam reference; a contractor building in 2026 should answer the authority having jurisdiction from the current Georgia adoption. The question context decides which source controls.

Exam-versus-field trap

If a NASCLA item expressly asks from the permitted 2021 IBC, answer that reference. If a Georgia project scenario asks what is currently enforceable in 2026, use the adopted 2024 IBC with Georgia amendments. The source named by the question prevents an apparent edition conflict.