Study guide

8.4 Heavy Timber, Fire Performance & Mass Timber

Georgia General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Exam Orientation, Blueprint & Open-Book Method

0.1 Official Exam Facts, Content Outlines & Approved References 0.2 Open-Book Navigation, Reference Indexing & Study Plan

2 Chapter 1: Georgia Contractor Licensing & Regulatory Law

1.1 Board Authority & Commercial General Contractor Tiers 1.2 Scope, Exemptions & Unlicensed Contracting 1.3 Eligibility, Experience Requirements & Qualifying Agents 1.4 Financial Responsibility, Net Worth, Surety Bonds & Insurance 1.5 License Renewal, No-CE Rule & Disciplinary Actions

3 Chapter 2: Georgia Construction & Lien Law

2.1 Georgia Mechanics & Materialmen's Liens 2.2 Project Notices: Notice of Commencement, Notice to Contractor & Preliminary Notice 2.3 Statutory Lien Waivers & Affidavits of Nonpayment 2.4 Georgia Prompt Pay Act & Right to Repair Act

4 Chapter 3: Business Organization, Financial Management & Taxes

3.1 Business Entity Selection & Joint Ventures 3.2 Georgia Entity Registration, Foreign Qualification & Trade Names 3.3 Construction Accounting, WIP & Financial Statements 3.4 Cash Flow, Working Capital & Construction Banking 3.5 Federal, Georgia & Payroll Tax Administration 3.6 Worker Classification, Wage-and-Hour & Prevailing Wage

5 Chapter 4: Construction Contracts, Bidding & Risk Management

4.1 Contract Pricing Models & Cost Risk 4.2 Project Delivery Methods & Responsibility 4.3 Essential Contract Clauses & Risk Allocation 4.4 Standard Documents: AIA, ConsensusDocs & EJCDC 4.5 Quantity Takeoff, Direct Cost & Markup 4.6 Bid Scope Review, Submission & Withdrawal 4.7 Surety Bonds, Insurance & Risk Management

6 Chapter 5: Project Management, Scheduling & Quality Control

5.1 Project Planning, WBS, Logic & Resources 5.2 CPM, Float, Updating & Schedule Compression 5.3 Project Administration, Submittals, RFIs & Records 5.4 Changes, Delays, Claims & Dispute Resolution 5.5 QA/QC, Special Inspections & Closeout

7 Chapter 6: Georgia Building Codes, Environmental Regulations & Site Work

6.1 Current Georgia Codes, Amendments, Permits & Inspections 6.2 Occupancy, Construction Type, Egress & Accessibility 6.3 GESA, NPDES, Buffers, BMPs & Certified Personnel 6.4 Survey Control, Layout, Clearing & Site Preparation 6.5 Excavation, Earthwork Volumes, Hauling & Compaction 6.6 Shallow Foundations, Slabs, Deep Systems & Drainage

8 Chapter 7: Concrete & Masonry Construction

7.1 Concrete Materials, Mix Design & Field Testing 7.2 Concrete Placement, Hot/Cold Weather, Curing & Defects 7.3 Formwork, Shores, Reshores & Removal 7.4 Reinforcing Steel, Splices & Post-Tensioning 7.5 Masonry Units, Mortar, Grout & Testing 7.6 Masonry Walls, Reinforcement, Flashing & Movement Joints

9 Chapter 8: Structural Steel, Metals & Framing Systems

8.1 Structural Steel Shapes, Framing & Erection Stability 8.2 Bolted Connections, Welding & Nondestructive Testing 8.3 Steel Joists, Deck & Cold-Formed Framing 8.4 Heavy Timber, Fire Performance & Mass Timber 8.5 Engineered Wood, I-Joists, Trusses & Connectors 8.6 Wood Framing, Sheathing, Bracing & Fastening

10 Chapter 9: Building Envelope, Thermal & Moisture Protection, Doors & Windows

9.1 Low-Slope Roofing, Insulation & Drainage 9.2 Steep-Slope Roofing, Sheet Metal & Flashing 9.3 Insulation, Air Barriers & Vapor Control 9.4 Commercial Doors, Frames, Hardware & Fire Assemblies 9.5 Windows, Storefronts & Curtain Walls 9.6 Insulating Glass, Safety Glazing & Water Control

11 Chapter 10: Finishes, Mechanical, Electrical & Plumbing Coordination

10.1 Gypsum Assemblies, Ceilings & Finish Coordination 10.2 Concrete Moisture, Flooring & Tile Assemblies 10.3 HVAC, Ductwork, Dampers & Mechanical Coordination 10.4 Plumbing, DWV, Venting & Backflow 10.5 Fire Sprinklers, Standpipes & Fire Department Connections 10.6 Electrical Distribution, Grounding & Emergency Systems

12 Chapter 11: Construction Safety & OSHA Standards (29 CFR Part 1926)

11.1 OSHA Authority, Inspections, Reporting & Multi-Employer Sites 11.2 Fall Protection, Clearance Planning & Scaffolds 11.3 Excavation, Protective Systems & Trench Safety 11.4 Hazard Communication, Silica, Temporary Power & PPE 11.5 Cranes, Rigging, Signal Persons & Power-Line Safety

8.4 Heavy Timber, Fire Performance & Mass Timber

Key Takeaways Explain This Topic AI

Large timber develops a protective char layer but design uses approved fire-resistance calculations.

Type IV categories and protection requirements depend on the adopted IBC edition.

Connections and concealed spaces can govern fire and structural performance.

Last updated: August 2026

8.4 Heavy Timber, Fire Performance & Mass Timber

Mass timber and engineered wood products (EWP) represent one of the fastest-growing structural framing sectors in commercial general contracting across the Southeast. Driven by sustainability, biophilic architectural design, and advances in structural adhesives, modern mass timber systems achieve structural capacities and fire-resistance ratings rivaling structural steel and reinforced concrete. General contractors must master the dimensional criteria of IBC Type IV (Heavy Timber) construction, understand wood char physics, properly handle Glued Laminated Timber (Glulam) , enforce strict penetration limits on Wood I-Joists , and understand the tall wood building provisions for Cross-Laminated Timber (CLT) .

IBC Type IV Heavy Timber (HT) Construction Standards

Under IBC Chapter 6 (Types of Construction) and IBC Section 2304.11 , Type IV (HT) construction relies on large-dimension solid-sawn or glued-laminated structural wood elements. The code strictly prohibits concealed spaces (such as drop-ceiling plenum cavities) in traditional heavy timber construction unless fully protected, preventing undetected fire spread.

Minimum Nominal Member Dimensions for Type IV (HT)

To qualify as Type IV construction, structural timber members must meet or exceed prescriptive minimum cross-sectional dimensions:

Structural Framing Member Minimum Nominal Dimensions (inches) Actual Finished Dimensions (inches) Structural Application / Code Basis

Columns Supporting Floor Loads 8 " × 8 " 8" \times 8" 8" × 8" 7 − 1 / 2 " × 7 − 1 / 2 " 7-1/2" \times 7-1/2" 7 − 1/2" × 7 − 1/2" Must carry multi-story floor dead and live loads; wood-to-wood bearing or heavy steel caps required.

Columns Supporting Roof/Ceiling Only 6 " × 8 " 6" \times 8" 6" × 8" 5 − 1 / 2 " × 7 − 1 / 2 " 5-1/2" \times 7-1/2" 5 − 1/2" × 7 − 1/2" Restricted to top-story roof gravity loads only.

Beams & Girders Supporting Floor Loads 6 " × 10 " 6" \times 10" 6" × 10" 5 − 1 / 2 " × 9 − 1 / 4 " 5-1/2" \times 9-1/4" 5 − 1/2" × 9 − 1/4" Primary and secondary floor framing girders and floor beams.

Beams, Girders & Arches Supporting Roof Only 4 " × 6 " 4" \times 6" 4" × 6" 3 − 1 / 2 " × 5 − 1 / 2 " 3-1/2" \times 5-1/2" 3 − 1/2" × 5 − 1/2" Roof rafters, purlins, and timber roof trusses not carrying floor loads.

Heavy Timber Floor Decking 3 " 3" 3" Nominal (Splined or Tongue-and-Groove) 2 − 1 / 2 " 2-1/2" 2 − 1/2" Actual Planks Planks must be overlaid with 1-inch nominal finish flooring or 1/2-inch wood structural panel sheathing.

Heavy Timber Roof Decking 2 " 2" 2" Nominal (Splined or Tongue-and-Groove) 1 − 1 / 2 " 1-1/2" 1 − 1/2" Actual Planks Or minimum 1-1/8-inch thick tongue-and-groove wood structural panel roof sheathing.

Inherent Fire Resistance & Wood Char Rate

Unlike unprotected structural steel—which rapidly loses approximately 50% of its yield strength at 1 , 000 ∘ F 1,000^\circ\text{F} 1 , 00 0 ∘ F and collapses catastrophically—massive structural wood elements perform exceptionally well in standard ASTM E119 fire conditions. WOOD CHAR THERMAL BARRIER

  • Fire Exposure (1,000°F - 1,800°F)
  • ═════════════════════════════════►
  • ┌───────────────────────────────┐
  • │ CHAR LAYER (~1.5" / Hour) │ ◄── Thermal Conductivity ~ 1/6th of unburned wood
  • ├───────────────────────────────┤
  • │ PYROLYSIS ZONE (~1/4" Thick) │ ◄── Thermal transition (390°F to 570°F)
  • ├───────────────────────────────┤
  • │ │
  • │ UNBURNED WOOD CORE │ ◄── Retains a Calculated Residual Section
  • │ (Ambient Temp < 212°F) │ Strength and Modulus of Elasticity (E)
  • │ │
  • └───────────────────────────────┘
  • The Charring Mechanism & Physics

Standard Char Rate: Heavy timber burns at a slow, predictable nominal rate of approximately 1.5 inches per hour (0.025 inches per minute) for solid-sawn lumber and glulam under standard fire exposures.

Insulating Charcoal Blanket: As the outer wood fibers combust, they form an expanding, porous layer of solid carbon (charcoal). Charcoal has a thermal conductivity approximately one-sixth that of raw timber, acting as a natural thermal insulator.

Core Strength Preservation: The char layer slows heat penetration, leaving a residual section that can continue to carry load. Fire design reduces the original member by the calculated char depth and heated zone and then checks the remaining section, connections, adhesive qualification, and required duration; it does not assume 100 percent ambient capacity.

Edition, connection, and moisture controls

Traditional heavy-timber dimensions are an exam-reference issue, while modern IBC Type IV-A, IV-B, and IV-C buildings add mass-timber, noncombustible-protection, height, area, and concealed-space provisions. Identify the IBC edition and subtype named in the question before selecting a member dimension. The sealed structural and fire-resistance design controls the project.

Connections often govern fire performance before the wood member does. Concealed plates, bolts, dowels, bearing seats, char protection, and fire-stopping at penetrations must match the tested or calculated assembly. Field cuts and penetrations can remove the sacrificial section or expose metal that conducts heat into the connection. Obtain the engineer's detail instead of improvising.

Mass timber also requires a moisture plan. Protect end grain and connection pockets during delivery; elevate members off the ground; document wetting; provide temporary drainage and ventilation; and measure moisture before enclosure. Trapped construction moisture can stain finishes, corrode concealed hardware, promote biological growth, and change dimensions. Coordinate repair, sanding, coating, and enclosure decisions with the manufacturer and design team rather than concealing a wet member.

Loading diagram... Engineered Wood Systems, Quality Standards & Tall Wood Classifications