Study guide
2.5 Disinfecting Contaminated Tools, Machines, Equipment, and the Daily Workstation
Georgia Nail Technician License Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Georgia Laws, Rules, and Licensure Standards
1.1 Georgia State Board Regulations & Licensing Requirements 1.2 Georgia Salon Sanitary Regulations & Inspections 1.3 Scope of Practice, Professional Ethics & Salon Business
2 Chapter 2: Infection Control, Decontamination, and Salon Safety
2.1 Microbiology & Pathology for Nail Technicians 2.2 Levels of Infection Control & Chemical Decontamination 2.3 OSHA Standards, SDS, and Blood Exposure Incident Protocols 2.4 Single-Use vs. Multi-Use Items, Labeling, and Storage 2.5 Disinfecting Contaminated Tools, Machines, Equipment, and the Daily Workstation
3 Chapter 3: Nail, Skin, and Musculoskeletal Anatomy & Physiology
3.1 Anatomy of the Natural Nail Unit 3.2 Skin Structure, Histology, and Glands 3.3 Bones, Muscles, Nerves, and Blood Vessels of Hands and Feet
4 Chapter 4: Nail Analysis, Disorders, Diseases, and Contraindications
4.1 Non-Infectious Nail Disorders & Serviceable Abnormalities 4.2 Infectious Nail Diseases & Contraindications 4.3 Skin Conditions, Allergies, and Chemical Irritation 4.4 Skin and Nail Analysis and Selecting the Appropriate Service 4.5 Contraindications and Declining or Altering a Service 4.6 Allergic Reaction (Patch) Test Procedures and Recognizing Adverse Reactions
5 Chapter 5: Manicure, Pedicure, and Skin Care Services
5.1 Professional Natural Nail Manicure Procedures 5.2 Pedicure Procedures, Callus Management, and Foot Safety 5.3 Hand, Arm, Foot, and Leg Massage & Specialty Treatments 5.4 Hot Towels, Skin-Care Tools and Devices, and Product Selection by Skin Condition
6 Chapter 6: Nail Enhancement Chemistry and Acrylic Systems
6.1 Nail Product Chemistry & Polymerization Fundamentals 6.2 Liquid Monomer and Polymer Powder (L&P) Acrylic Enhancements 6.3 Maintenance, Rebalancing, and Safe Acrylic Removal
7 Chapter 7: Gels, Wraps, Dip Systems, Tips, and Nail Art
7.1 Light-Cured Gels and Gel Polish Systems 7.2 Nail Wraps and Dip Powder Systems 7.3 Electric Filing Mechanics, Bits, Safety, and Nail Art 7.4 Nail Tip Application, Natural Nail Repair, and Artificial Nail Removal
8 Chapter 8: Workplace Safety Precautions
8.1 Maintaining Safe Working Conditions and Safe Water Temperature 8.2 Safe Use and Maintenance of Equipment, and Electrical Safety 8.3 Labeling and Storage of Materials and Chemicals, SDS, and Prohibited Substances 8.4 Protective Chemical Barriers and Draping for Clients
9 Chapter 9: Ergonomics, Client Consultation, and Georgia Exam Preparation
9.1 Ergonomics, Ventilation, and Workplace Hazard Control 9.2 Client Consultation, Professional Records, and Retention 9.3 PSI National Nail Technician Theory Test: Blueprint and Strategy 9.4 PSI National Nail Technician Practical Test: Topic Areas and Rating Criteria
2.5 Disinfecting Contaminated Tools, Machines, Equipment, and the Daily Workstation
Key Takeaways Explain This Topic AI
The PSI outline splits cleaning and disinfection into three distinct targets: contaminated tools, machines and equipment, and the daily workstation — each has a different procedure.
Rule 240-4-.04(1) prohibits the use of any article that is not properly cleansed and disinfected on any client, which makes an unprocessed tool a violation the moment it touches a client.
Machines and equipment that cannot be immersed — e-file handpieces, lamps, table lamps, chairs, armrests — are wiped or sprayed with an EPA-registered disinfectant and kept visibly wet for the full label contact time.
Daily workstation preparation and end-of-day breakdown are separately scored topic areas 1 and 5 on the PSI practical test, worth 20 of the roughly 90 practical minutes.
Disinfectant solution must be free of debris and contaminants at all times and must be changed daily, and implements may never be stored in it.
Last updated: August 2026
Disinfecting Contaminated Tools, Machines, Equipment, and the Daily Workstation
The PSI theory outline does not treat disinfection as one topic. Under Safety and Infection Control it lists "Methods and procedures for cleaning and disinfection" and then breaks that into three lettered targets: (a) contaminated tools, (b) machines and equipment, and (c) daily workstation. They are listed separately because the procedures genuinely differ. A single-procedure answer will be wrong for two of the three.
1. Target A — Contaminated Tools (Immersion)
This is the procedure most technicians know, and Georgia states it in five parts in Rule 240-4-.04(2)(b):
Clean with warm soapy water to remove all hair and debris. A nail brush reaches hinge joints, nipper box joints, and serrations. Disinfectant cannot penetrate organic soil, so skipping this step invalidates everything after it.
Immerse completely for 10 minutes in a product whose label indicates EPA registration as a disinfectant. The container must be large enough that solution covers all surfaces of the item — a nipper standing on end with its handles above the waterline is not disinfected.
Maintain the solution. It must be free of debris and contaminants at all times and must be changed daily . Cloudy, hair-flecked, or diluted solution is a citable finding on inspection.
Rinse thoroughly with clean warm water and blot dry .
Store per Rule 240-4-.05 in the "Clean Implements" container. Tools cannot be stored in disinfectant.
An autoclave meeting or exceeding ANSI/AAMI ST55:2010 or ISO 17665, producing high-temperature steam at 121°C to 134°C , is an acceptable alternative under Rule 240-4-.04(2)(c). It is optional in a nail salon, not required.
2. Target B — Machines and Equipment (Wipe and Dwell)
Most of the expensive items at a nail station cannot go in a jar. An electric file handpiece, a UV/LED lamp, a table lamp, a dust collector housing, an armrest, a client chair, and a technician stool all contact clients or contaminated hands and none of them can be immersed.
The procedure is the same logic without the bath:
Remove and process the detachable parts separately. Metal drill bits are multi-use and go through full immersion. Sanding bands and mandrel sleeves are single-use and are discarded.
Pre-clean the surface. Wipe away nail dust, product residue, and oils with a clean disposable towel. Dust is organic soil; disinfectant sprayed onto dust disinfects the dust.
Apply the EPA-registered disinfectant and keep the surface visibly wet for the full label contact time. This is the step most often botched. A quick swipe that dries in fifteen seconds has not achieved a ten-minute contact time. Re-wet as needed, or use a saturated wipe and leave it in place.
Wipe dry and return to service. +-----------------------------------------------------------------------------+
- | EQUIPMENT THAT NEEDS DISINFECTION BUT CANNOT BE IMMERSED |
- | |
- | [E-FILE HANDPIECE & CORD] --> Wipe body + cord; bits immersed 10 min; |
- | sanding bands/sleeves DISCARDED. |
- | |
- | [UV / LED CURING LAMP] -----> Interior floor and rim contact fingers; |
- | wipe after EVERY client, not daily. |
- | |
- | [DUST COLLECTOR] -----------> Wipe housing and grate; empty and clean |
- | filter per manufacturer schedule. |
- | |
- | [ARMREST / CUSHION] --------> Non-porous cover wiped between clients. |
- | A cloth cover is LINEN: single client, then |
- | laundered. Store soiled linens in a closed |
- | container (Rule 240-4-.05). |
- | |
- | [PARAFFIN BATH] ------------> Client never enters the tank. Ladle or use |
- | single-use liners; discard used wax. |
- | |
- | [PEDICURE UNIT] ------------> Own three-tier schedule under |
- | Rule 240-4-.04(4) with a mandatory log. |
- +-----------------------------------------------------------------------------+
- 3. Target C — The Daily Workstation
The workstation is the third target, and PSI weights it heavily: topic area 1 (Workstation Preparation, 10 minutes) and topic area 5 (Workstation Preparation for Next Client, 10 minutes) together are 20 of the roughly 90 practical minutes, and neither involves touching a nail.
Opening the station (daily preparation):
Wash hands. Rule 240-4-.03(2) requires hand washing before and between every client service.
Clear the table completely, then clean and disinfect the entire work surface, including the edge you rest your forearms on.
Cover the surface with a clean disposable towel or freshly laundered cloth.
Set out the "Clean Implements" container, the "Dirty Implements" container, and a covered waste receptacle.
Confirm the disinfectant jar holds fresh solution, is free of debris, and is labeled.
Check that products are in closed, uncontaminated containers with legible manufacturer labels.
Between clients: Discard all single-use items, move multi-use items to "Dirty Implements," disinfect the table surface and any equipment the client touched, replace the towel, wash hands, and only then seat the next client.
Closing the station: Process all remaining implements, discard the day's disinfectant solution, remove all waste (Rule 240-4-.03(6) requires waste removal daily and prohibits leaving garbage in the establishment overnight), and store soiled linens in a closed container.
Important
Rule 240-4-.04(1) is the sentence that makes all of this enforceable: "The use of any article that is not properly cleansed and disinfected on any client or subject is prohibited." There is no de minimis exception for a tool that "looks clean" or was "only used for a second."
4. Contamination Events Mid-Service
The outline's phrase "daily workstation" also covers what happens when a clean surface becomes unclean partway through a service. PSI names the scenarios directly in its infection-control expectations:
You know when your hands become contaminated — after touching your face, hair, phone, the floor, or a soiled item — and you re-wash before continuing.
Items set on a contaminated work surface may not be inserted into product containers or touch the dispensing tips of bottles and jars.
Dispense without contamination. No double dipping; no touching a brush that returns to the bottle against skin.
If a body fluid appears — blood, vomit, feces — you handle it without contaminating yourself, the client, or the station.
Each of these is a scored behavior on every practical topic area, because adheres to workplace infection control precautions is a criterion in all five.