Study guide

10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species

Georgia Commercial Pesticide Applicator Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Georgia Commercial Applicator Exam Facts 1.2 Private, Commercial, and Contractor Licenses 1.3 How to Prepare

2 Georgia and Federal Pesticide Law

2.1 Georgia Pesticide Use and Application Act of 1976 2.2 FIFRA, Registration, and Restricted-Use Classification 2.3 FQPA, ESA, WPS Overview, and Other Federal Rules

3 Certification, Categories, and Recertification

3.1 Exam Logistics, Scores, and Retakes 3.2 Georgia License Categories 21–41 3.3 Five-Year Recertification and Renewal Fees

4 Records, Contracting, and Landscape Posting

4.1 Georgia Recordkeeping (Rule 40-21-5) 4.2 Contractor Licenses and Financial Responsibility 4.3 Landscape Application Posting (Rule 40-21-9)

5 Pests, Control Methods, and IPM

5.1 Pest Recognition and Biology 5.2 Biological, Mechanical, Cultural, and Chemical Control 5.3 IPM Steps and Pesticide Resistance

6 Labels and Labeling Comprehension

6.1 The Label Is the Law; Registration Types 6.2 Label Parts, Signal Words, and Precautionary Statements 6.3 Directions for Use, REI, PHI, and SDS

7 Pesticide Types and Formulations

7.1 Solutions, Suspensions, Emulsions, and Liquid Formulations 7.2 Dry Formulations, Baits, Fumigants, and Packets 7.3 Adjuvants, Tank-Mix Compatibility, and Dilution

8 Toxicity, Exposure, and First Aid

8.1 Toxicity vs Hazard, LD50, and Toxicity Categories 8.2 Exposure Routes and Poisoning Symptoms 8.3 First Aid and Heat Stress vs Poisoning

9 PPE and Handler Safety

9.1 Chemical-Resistant Clothing, Gloves, Footwear, and Eyewear 9.2 Respirators and Fit 9.3 PPE Care, Wash, and Disposal

10 Pesticides in the Environment

10.1 Solubility, Adsorption, Persistence, and Volatility 10.2 Surface Water, Groundwater, Anti-Siphon, and Rule 40-23 10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species

11 Transport, Storage, Security, and Disposal

11.1 Transportation and Site Security 11.2 Storage Site Design and Container Safety 11.3 Triple Rinse, Recycling, and Waste Disposal

12 Mixing, Loading, and Emergencies

12.1 Safe Mixing and Loading; Protecting Water 12.2 Closed Systems, Water-Soluble Packets, Enclosed Cabs 12.3 Spill Control-Contain-Clean and Fire Response

13 Equipment and Calibration

13.1 Sprayers, Nozzles, Granular, and Other Equipment 13.2 Calibration and Application-Rate Calculations 13.3 Area Math and Mixing Concentrates

14 Application Methods and Drift

14.1 Broadcast, Band, Directed, Spot, ULV, Chemigation 14.2 Particle vs Vapor Drift, Inversions, and Wind 14.3 Drift-Reduction Practices and Nozzle Selection

15 Supervision, WPS, and Professional Conduct

15.1 Supervising Uncertified Persons and Professional Conduct 15.2 Worker Protection Standard Duties 15.3 Paraquat and Other Product-Specific Training

16 Category Exam Competency

16.1 Categories 21, 22, 24 (Plant, Animal, Ornamental & Turf) 16.2 Categories 23, 25–27, 31, 41 (Forest, Seed, Aquatic, ROW, Public Health, Mosquito) 16.3 Categories 32–40 (Regulatory, Demo, Aerial, 35, Wood, Antimicrobial, Fumigation, Antifoulant, WPS)

10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species

Key Takeaways Explain This Topic AI

Do not spray blooming forage while bees are foraging unless the label clearly allows it; evening or early-morning timing is the usual Core recommendation when honey bees are inactive, and you must notify beekeepers when the label requires notice.

Honey bees may forage about three miles from the hive (National Core Chapter 7); insecticides are the usual acute hazard, and blooming weeds in middles or ditches count as forage.

Sensitive areas include schools, playgrounds, apiaries, water, livestock, ornamental plantings, and endangered-species habitat; labels may list extra precautions, but a sensitive site is not automatically untreated if a pest must be controlled.

If the label directs you to EPA Bulletins Live! Two, obtain any applicable Endangered Species Protection Bulletin within six months before or on the day of application, search by EPA registration number, and follow PULA limits as labeling.

Fish kills often follow insecticide runoff into small ponds or low-flow creeks; birds mistake granules, baits, and treated seed for food; secondary poisoning is a predator eating a contaminated carcass.

Last updated: August 2026

10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species

A legal rate on the right crop can still be an environmental failure if it kills a hive, a pond full of fish, or a listed species. Rule 40-21-3 lists nontarget injury among the General Standards. National Core Chapter 7 groups the problem as sensitive areas , non-target plants and animals , and endangered species . EPA now puts geographically specific limits in Endangered Species Protection Bulletins served through Bulletins Live! Two (BLT) . Particle-drift tactics belong in Chapter 14 ; this section is about who you must not hit and which extra label documents you must pull before you spray.

Sensitive areas

A sensitive area is any place where living things—or drinking water—could be easily injured. Outdoor examples from Core, mapped onto Georgia work:

School grounds, playgrounds, parks, and recreational fields (Category 24 and mosquito work).

Apiaries (managed honey bee yards) and blooming forage.

Wildlife refuges, wetlands, farm ponds, creeks, and irrigation reservoirs.

Habitats of endangered or threatened species.

Livestock lots, horse farms, and domestic-animal areas.

Ornamental plantings, public gardens, and sensitive food or feed crops.

Indoor interiorscapes (malls, conservatories) and food-storage or food-preparation areas.

A sensitive area is not automatically a no-spray zone. Mosquito-control ( Category 41 ) and some regulated-pest programs exist because the sensitive site has a pest. The operating rules are: read the label for special precautions, leave untreated buffers when you can, use the least-hazardous effective product, and do not treat a larger site sloppily just because a playground sits in one corner of a campus.

Important

Core exam language: pesticide labels may contain statements that list special precautions around sensitive areas . Endangered-species habitat is a sensitive area. “Never spray a sensitive area for any reason” is too absolute.

Bees and other pollinators

Honey bees pollinate Georgia peaches, apples, blueberries, vegetables, and many seed crops; wild bees and other beneficials do the same work without a hive box. Bees may forage as far as about three miles from the hive. Preventing bee kill is shared among the applicator, the grower, and the beekeeper.

Routes of exposure:

Direct contact during foliar sprays.

Contact with residues on bloom (the crop or weeds in the ditch and orchard middles).

Drift to the hive entrance (how you stop droplets is Chapter 14; the duty to prevent it is yours now).

Residues in nectar, pollen, or guttation water from foliar, soil, seed-treatment, or tree-injection uses.

Insecticides are the usual acute bee hazard. Some fungicides can affect larvae; tank mixes of insecticide plus fungicide can be more toxic than either product alone. Herbicides are less often directly toxic to bees but can remove forage.

Label practice you must be able to recite:

Find the bee hazard icon and the pollinator statements in Directions for Use.

Do not spray blooming forage while bees are foraging unless the label clearly allows a stated exception.

When bloom cannot be avoided, labels often restrict applications to evening or early morning (or night) when honey bees are not foraging. Wild bees may fly at dawn—read the label; do not assume “early morning” is always safe.

Notify beekeepers when the label requires it (some products specify advance notice, commonly on the order of 48 hours, so colonies can be moved, covered, or shut in). Georgia Rule 40-23 does not replace that label duty with a different state number; if the label says notify, notify.

Do not let spray contaminate hives or blooming weeds at the field edge.

Choose a less hazardous formulation and method when bees are nearby. Residual wettable powders on bloom are a classic high-hazard residue; aerial application over bloom is generally more hazardous to bees than a targeted ground spray. Neither fact authorizes ignoring a label that forbids bloom applications.

If you will treat blooming cotton, a pecan orchard with clover in the middles, or a municipal right-of-way full of wildflowers, walk the site for forage and hive boxes the same day, not last month.

Fish, wildlife, livestock, and plants

Fish kills often follow insecticide-contaminated runoff into a small pond or a low-flow creek—the farm-pond geometry common in Georgia pastures. Birds die from eating granules, baits, or treated seed they mistake for food, from direct spray, from contaminated water, or from eating contaminated insects. Liquid formulations are often a better choice when birds are actively feeding in the site; placement of baits must keep them away from pets and wildlife.

Secondary poisoning happens when a predator or scavenger eats an animal that already carries a harmful residue. If the label discusses secondary poisoning (some rodenticides and highly persistent insecticides), those statements are part of the law of the label.

Livestock poisoning is still most often contaminated feed, forage, or drinking water from sloppy storage, spills, or spray on hay that will be cut too soon. Check grazing and haying intervals.

Phytotoxicity is chemical injury to plants—stunting, speckling, cupped leaves, dead margins—from the wrong rate, the wrong timing, vapor movement of a herbicide, or root uptake of a product that ran off into a peach row or a nursery bed. Nearly any pesticide can injure a plant if misapplied; herbicides are the usual driver. Repeated mix/load on the same patch of soil can build a residue hotspot that injures whatever grows there later.

Nontarget Typical hazard Practical control

Bees Insecticide on bloom while foraging No bloom spray unless the label allows; evening/early morning; notify when required

Fish Insecticide runoff into ponds and creeks Keep product off water; watch storms after application

Birds / wildlife Granules, baits, treated seed, secondary poisoning Choose formulation; place baits; read scavenger statements

Livestock Contaminated hay, pasture, or water Storage, spill control, grazing/haying intervals

Plants Phytotoxicity from rate, timing, vapor, or root uptake Right product, right rate, watch vapor-active herbicides

Endangered and threatened species and Bulletins Live! Two

An endangered species is in danger of extinction across all or a significant portion of its range. A threatened species is likely to become endangered. Removing one species can cascade through a food web; EPA’s Endangered Species Protection Program is how pesticide labels carry that federal duty down to the applicator.

Older training talked about “county bulletins.” The current delivery system is EPA’s web application Bulletins Live! Two (BLT) . Endangered Species Protection Bulletins set geographically specific pesticide use limitations to protect listed species and designated critical habitat . Limits may include buffers, timing windows, rate caps, runoff/erosion mitigation, or a prohibition in a mapped Pesticide Use Limitation Area (PULA) .

If your label directs you to BLT , you must:

Obtain any applicable Bulletin within six months before the application, or on the day of application (EPA’s example: a July 1 application can use a Bulletin obtained anytime from January 1 through July 1).

Search with the EPA registration number on the label—not a distributor code, not the crop name alone.

Match location and application month .

Follow both the ordinary label and every limit in the applicable Bulletin. Using a pesticide in a manner inconsistent with its labeling, including a Bulletin the label incorporates, is a FIFRA violation.

You may open BLT, enter a Georgia county and a product, and see no extra map limits. That does not mean you skipped a step. EPA continues to add PULAs as consultations finish. Check before each application window , not once per license term. Keep a copy of the Bulletin you generated for that site and date. If you lack internet in the field, EPA’s ESPP help line is 1-844-447-3813 ( ESPP@epa.gov ).

Bulletins do not erase pollinator language, aquatic setbacks, or Georgia anti-siphon law. They add a geographic overlay. A Category 21 cotton applicator in south Georgia and a Category 27 right-of-way applicator along a coastal marsh may hold different Bulletins for the same EPA registration number because the place changed.

Putting nontarget protection on a Georgia workday

Walk the site: bloom, hives, ponds, wells, school property lines, livestock, and any label-listed habitat. Read Environmental Hazards and Directions for Use, including bee icons and BLT sentences. If bees will forage, change timing or product, and notify when required. If a Bulletin PULA covers the field this month, those extra limits are as binding as the rate table. Drift reduction—nozzles, wind, inversions—is Chapter 14; leaving it out of today’s pre-job check is how nontarget kills happen.

Worked Georgia site

A Category 24 crew is treating flowering ornamental beds next to a school playground. The insecticide label shows the bee icon, forbids application while bees are foraging, and directs users to BLT. Same-day tasks: confirm no bloom-foraging bees (or wait until evening if the label allows that window), look for hives within foraging range, generate a BLT Bulletin for the EPA registration number and the application month, and treat the playground edge as a sensitive area with any labeled buffer. None of that is optional “stewardship.” It is labeling plus Core Chapter 7 practice.

Loading diagram... Pre-application nontarget and Bulletins Live! Two decision flow

Relative pollinator-risk ranking for teaching (0–10 scale, not a toxicity lab value)