Study guide
10.1 Solubility, Adsorption, Persistence, and Volatility
Georgia Commercial Pesticide Applicator Certification Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Georgia Commercial Applicator Exam Facts 1.2 Private, Commercial, and Contractor Licenses 1.3 How to Prepare
2 Georgia and Federal Pesticide Law
2.1 Georgia Pesticide Use and Application Act of 1976 2.2 FIFRA, Registration, and Restricted-Use Classification 2.3 FQPA, ESA, WPS Overview, and Other Federal Rules
3 Certification, Categories, and Recertification
3.1 Exam Logistics, Scores, and Retakes 3.2 Georgia License Categories 21–41 3.3 Five-Year Recertification and Renewal Fees
4 Records, Contracting, and Landscape Posting
4.1 Georgia Recordkeeping (Rule 40-21-5) 4.2 Contractor Licenses and Financial Responsibility 4.3 Landscape Application Posting (Rule 40-21-9)
5 Pests, Control Methods, and IPM
5.1 Pest Recognition and Biology 5.2 Biological, Mechanical, Cultural, and Chemical Control 5.3 IPM Steps and Pesticide Resistance
6 Labels and Labeling Comprehension
6.1 The Label Is the Law; Registration Types 6.2 Label Parts, Signal Words, and Precautionary Statements 6.3 Directions for Use, REI, PHI, and SDS
7 Pesticide Types and Formulations
7.1 Solutions, Suspensions, Emulsions, and Liquid Formulations 7.2 Dry Formulations, Baits, Fumigants, and Packets 7.3 Adjuvants, Tank-Mix Compatibility, and Dilution
8 Toxicity, Exposure, and First Aid
8.1 Toxicity vs Hazard, LD50, and Toxicity Categories 8.2 Exposure Routes and Poisoning Symptoms 8.3 First Aid and Heat Stress vs Poisoning
9 PPE and Handler Safety
9.1 Chemical-Resistant Clothing, Gloves, Footwear, and Eyewear 9.2 Respirators and Fit 9.3 PPE Care, Wash, and Disposal
10 Pesticides in the Environment
10.1 Solubility, Adsorption, Persistence, and Volatility 10.2 Surface Water, Groundwater, Anti-Siphon, and Rule 40-23 10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species
11 Transport, Storage, Security, and Disposal
11.1 Transportation and Site Security 11.2 Storage Site Design and Container Safety 11.3 Triple Rinse, Recycling, and Waste Disposal
12 Mixing, Loading, and Emergencies
12.1 Safe Mixing and Loading; Protecting Water 12.2 Closed Systems, Water-Soluble Packets, Enclosed Cabs 12.3 Spill Control-Contain-Clean and Fire Response
13 Equipment and Calibration
13.1 Sprayers, Nozzles, Granular, and Other Equipment 13.2 Calibration and Application-Rate Calculations 13.3 Area Math and Mixing Concentrates
14 Application Methods and Drift
14.1 Broadcast, Band, Directed, Spot, ULV, Chemigation 14.2 Particle vs Vapor Drift, Inversions, and Wind 14.3 Drift-Reduction Practices and Nozzle Selection
15 Supervision, WPS, and Professional Conduct
15.1 Supervising Uncertified Persons and Professional Conduct 15.2 Worker Protection Standard Duties 15.3 Paraquat and Other Product-Specific Training
16 Category Exam Competency
16.1 Categories 21, 22, 24 (Plant, Animal, Ornamental & Turf) 16.2 Categories 23, 25–27, 31, 41 (Forest, Seed, Aquatic, ROW, Public Health, Mosquito) 16.3 Categories 32–40 (Regulatory, Demo, Aerial, 35, Wood, Antimicrobial, Fumigation, Antifoulant, WPS)
10.1 Solubility, Adsorption, Persistence, and Volatility
Key Takeaways Explain This Topic AI
Solubility is how readily a pesticide dissolves in water; highly soluble products are more likely to move with runoff and leaching than poorly soluble ones (National Core Chapter 7).
Adsorption is binding to soil particles, not uptake into a plant (absorption); oil-soluble and positively charged pesticides bind tightly to clay and organic matter and are less likely to leave the site in dissolved form.
Persistence is described by half-life (time for 50 percent of the chemical to degrade); residue that remains may be useful for control or illegal on food and feed if it exceeds a tolerance.
Pesticides degrade by chemical hydrolysis, microbial action, and photodegradation; warm, moist soil speeds chemical and microbial breakdown, while cool, dry soil slows them.
Volatility (turning into vapor) increases with higher temperature, higher wind, and lower relative humidity; spray-droplet drift tactics belong mainly in Chapter 14.
Last updated: August 2026
10.1 Solubility, Adsorption, Persistence, and Volatility
Every Georgia commercial pesticide application starts with the same environmental question: after the product leaves the tank, where can it go, and what can it do when it gets there? Rule 40-21-3 requires every certified applicator—Category 21 Agricultural Plant through Category 41 Mosquito Control—to show practical knowledge of the environment, including weather, soil, nontarget organisms, and drainage. The National Pesticide Applicator Certification Core Manual, Chapter 7 , supplies the fate vocabulary the General Standards exam uses: solubility , adsorption , persistence , and volatility . Those four properties, plus how a pesticide degrades , decide whether a cotton herbicide stays in a Tifton-sand bed, a pecan insecticide rides a thunderstorm into a farm pond, or a turf product evaporates off a hot Atlanta sidewalk.
The environment is not only forests and rivers. It is air, soil, water, plants, animals, houses, shops, office buildings, and everything in them. A Category 24 ornamental-and-turf job in a Gwinnett County subdivision is an environmental application just as surely as a Category 21 peanut spray in Early County.
Solubility
Solubility is the ability of a pesticide to dissolve in a solvent, usually water. Highly soluble pesticides dissolve easily. That is convenient when you mix a spray, and it is a liability the moment rain, irrigation, or a spill puts extra water on the treated surface. Dissolved pesticide moves with the water. Two water pathways matter:
Runoff — water moving across the surface, carrying dissolved pesticide or pesticide stuck to eroded soil.
Leaching — water moving downward through soil, carrying dissolved pesticide toward the water table .
A poorly soluble product is less eager to travel with water. It may still move if it is attached to eroding soil, which is why labels warn about both runoff and sediment. Solubility does not tell you whether a product is “safe.” It tells you whether water is an efficient carrier.
Adsorption (not absorption)
Adsorption is the process of a pesticide binding to soil particles . Do not confuse it with absorption , which is uptake into a plant or animal. Oil-soluble pesticides generally adsorb more tightly to clay and organic matter than water-soluble pesticides do. Pesticide molecules with a positive charge bind tightly to negatively charged clay surfaces. A tightly adsorbed pesticide is less likely to leach or run off in dissolved form. A weakly adsorbed, highly soluble product on coarse sand is the leaching combination you should be able to name in your sleep.
Georgia’s Coastal Plain sands (peanuts, cotton, tobacco, vegetables) offer fewer binding sites than Piedmont clays. High organic matter in a pecan orchard floor or a compost-amended landscape bed works like a sponge: it holds water and adsorbed pesticide in the root zone, where plants may take it up and microbes can degrade it.
Adsorption is not a guarantee the product stays put. If a gully-washer peels treated topsoil into a ditch, the adsorbed pesticide travels with the sediment . That is still off-site movement; it is just riding soil instead of dissolving in the water column.
Persistence, residue, and half-life
Persistence is the ability of a pesticide to remain present and active in its original form for an extended time before it breaks down. Persistence is described by half-life : the time needed for 50 percent of the chemical to degrade. A longer half-life means a more persistent pesticide.
Residue is the pesticide that remains after an application or a spill. Residue is useful when you need residual insect or weed control. Residue is a problem when it injures a rotational crop, contaminates forage, or remains as an illegal residue on food or feed. Tolerances are the legal limits on residues in food and feed. Labels carry plant-back (replant) restrictions because a persistent herbicide can still be active when the next crop goes in.
Persistent plus soluble is the groundwater worry: the molecule stays intact long enough to ride percolating water. Persistent plus adsorbed may stay near the application site—until erosion moves the soil itself. Persistence is not automatically “bad.” It is a property you must match to the site, the crop rotation, and the label.
Degradation: how pesticides stop being pesticides
Pesticides break down into simpler, often less toxic, compounds by three processes:
Chemical degradation (often hydrolysis ) — a chemical reaction with water; living organisms are not required.
Microbial degradation — fungi and bacteria in soil transform the molecule.
Photodegradation — sunlight breaks the molecule apart.
Warm, moist soil speeds chemical and microbial breakdown. Cool, dry soil slows both. A drought-stressed south Georgia field can keep a herbicide active longer than the same rate applied after a June rain. Photodegradation matters most on exposed surfaces—leaf, soil crust, pavement—not two feet down in the profile.
Volatility
Volatility is the tendency of a pesticide to turn into a gas or vapor. Volatility rises as temperature and wind increase and as relative humidity falls (drier air favors evaporation). Vapor can move off-site even when droplets were released correctly. Particle (spray) drift, temperature inversions, and nozzle selection are taught in Chapter 14 . The fate point here is that a volatile product has an extra off-site pathway: air .
How pesticides move from the target
Pesticides leave the target in four ways:
Air — spray droplets, vapors, dusts or solid particles, and pesticide riding blowing soil.
Water — runoff on the surface or leaching downward.
Soil particles — adsorbed pesticide moving with erosion.
Objects, plants, or animals — residues on PPE, work clothing, harvested crops, treated seed, or animals that walk through a wet spray. Contaminated clothing can unload residue onto carpet, laundry, pets, and people at home.
Runoff and leaching are more likely when too much product is applied or spilled, when rain or irrigation is excessive, or when the pesticide is highly soluble or persistent. Outdoor runoff heads toward ditches, streams, ponds, and storm drains. Leaching heads toward groundwater. In a greenhouse, leachate can contaminate floors, other benches, and drains.
- Property What it measures If this property is HIGH
- Solubility Ability to dissolve in water More movement with runoff and leaching
- Adsorption Binding to clay and organic matter Less dissolved movement; sediment can still carry it
Persistence Time the original molecule stays active (half-life) Longer residue; more time to leach or injure a rotational crop
Volatility Tendency to become vapor More vapor movement in air (see Chapter 14 for spray-drift tactics)
Important
High solubility, low adsorption, long persistence, coarse texture, low organic matter, and a shallow water table stack the deck for leaching. High adsorption to clay and organic matter is the property that reduces dissolved movement.
Worked Georgia site
A Category 21 applicator near Tifton is choosing between two residual herbicides for peanuts on coarse sand with a water table close to the surface after winter rains. Product A is highly water-soluble, weakly adsorbed, and has a long half-life. Product B is less soluble, binds to organic matter, and degrades faster in warm moist soil. Even if both are labeled for peanuts, Product A is the leaching candidate. If Product A’s label carries a groundwater advisory, that statement is the legal control—not a marketing footnote. Product B still can move if a storm erodes treated soil into a ditch, because adsorption does not stop sediment transport.
Exam traps
Treating adsorption as if it were absorption .
Assuming a dry formulation cannot move—granules left on a driveway run to the storm drain with the next rain.
Believing persistence is always a defect; residual control is often why the product was chosen.
Dumping all drift detail into this chapter. Fate tells you vapors and droplets can move; Chapter 14 tells you how to reduce spray drift.
If you can name the four properties, the three degradation processes, and the four movement pathways, you have the General Standards environment core.