Study guide

5.3 IPM Steps and Pesticide Resistance

Georgia Commercial Pesticide Applicator Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Georgia Commercial Applicator Exam Facts 1.2 Private, Commercial, and Contractor Licenses 1.3 How to Prepare

2 Georgia and Federal Pesticide Law

2.1 Georgia Pesticide Use and Application Act of 1976 2.2 FIFRA, Registration, and Restricted-Use Classification 2.3 FQPA, ESA, WPS Overview, and Other Federal Rules

3 Certification, Categories, and Recertification

3.1 Exam Logistics, Scores, and Retakes 3.2 Georgia License Categories 21–41 3.3 Five-Year Recertification and Renewal Fees

4 Records, Contracting, and Landscape Posting

4.1 Georgia Recordkeeping (Rule 40-21-5) 4.2 Contractor Licenses and Financial Responsibility 4.3 Landscape Application Posting (Rule 40-21-9)

5 Pests, Control Methods, and IPM

5.1 Pest Recognition and Biology 5.2 Biological, Mechanical, Cultural, and Chemical Control 5.3 IPM Steps and Pesticide Resistance

6 Labels and Labeling Comprehension

6.1 The Label Is the Law; Registration Types 6.2 Label Parts, Signal Words, and Precautionary Statements 6.3 Directions for Use, REI, PHI, and SDS

7 Pesticide Types and Formulations

7.1 Solutions, Suspensions, Emulsions, and Liquid Formulations 7.2 Dry Formulations, Baits, Fumigants, and Packets 7.3 Adjuvants, Tank-Mix Compatibility, and Dilution

8 Toxicity, Exposure, and First Aid

8.1 Toxicity vs Hazard, LD50, and Toxicity Categories 8.2 Exposure Routes and Poisoning Symptoms 8.3 First Aid and Heat Stress vs Poisoning

9 PPE and Handler Safety

9.1 Chemical-Resistant Clothing, Gloves, Footwear, and Eyewear 9.2 Respirators and Fit 9.3 PPE Care, Wash, and Disposal

10 Pesticides in the Environment

10.1 Solubility, Adsorption, Persistence, and Volatility 10.2 Surface Water, Groundwater, Anti-Siphon, and Rule 40-23 10.3 Bees, Wildlife, Sensitive Sites, and Endangered Species

11 Transport, Storage, Security, and Disposal

11.1 Transportation and Site Security 11.2 Storage Site Design and Container Safety 11.3 Triple Rinse, Recycling, and Waste Disposal

12 Mixing, Loading, and Emergencies

12.1 Safe Mixing and Loading; Protecting Water 12.2 Closed Systems, Water-Soluble Packets, Enclosed Cabs 12.3 Spill Control-Contain-Clean and Fire Response

13 Equipment and Calibration

13.1 Sprayers, Nozzles, Granular, and Other Equipment 13.2 Calibration and Application-Rate Calculations 13.3 Area Math and Mixing Concentrates

14 Application Methods and Drift

14.1 Broadcast, Band, Directed, Spot, ULV, Chemigation 14.2 Particle vs Vapor Drift, Inversions, and Wind 14.3 Drift-Reduction Practices and Nozzle Selection

15 Supervision, WPS, and Professional Conduct

15.1 Supervising Uncertified Persons and Professional Conduct 15.2 Worker Protection Standard Duties 15.3 Paraquat and Other Product-Specific Training

16 Category Exam Competency

16.1 Categories 21, 22, 24 (Plant, Animal, Ornamental & Turf) 16.2 Categories 23, 25–27, 31, 41 (Forest, Seed, Aquatic, ROW, Public Health, Mosquito) 16.3 Categories 32–40 (Regulatory, Demo, Aerial, 35, Wood, Antimicrobial, Fumigation, Antifoulant, WPS)

5.3 IPM Steps and Pesticide Resistance

Key Takeaways Explain This Topic AI

National Core Manual Chapter 1 groups IPM into five components: identify the pest and its biology, monitor, develop the pest-management goal, implement a combination of tactics, and record and evaluate results.

Spraying first is an exam trap because it skips identification, monitoring, and the threshold/goal step and often creates secondary pests.

Agronomic cotton and peanuts use economic or action thresholds from scouting; turf and ornamentals often use aesthetic thresholds based on appearance, which are not the same number.

Pesticide resistance is a heritable population change; the Core Manual response is mode-of-action rotation and IPM, not using more product or exceeding the label.

Host resistance such as Bt cotton still needs resistance-management practices (refuges, scouting for non-target pests); Rule 40-21-3 Domain 5 expressly tests factors that lead to resistance.

Last updated: August 2026

Why spraying first is the exam trap

A Gwinnett lawn looks off-color. A Tift County cotton consultant sees stippled leaves. A Chatham County truck gets a call that "the mosquitoes are terrible." The wrong General Standards answer in every one of those stories is the same: mix a broad-spectrum product immediately. That answer skips Rule 40-21-3's pests domain (you never recognized the organism or its biology), skips most of Chapter 1's applied methods, and skips integrated pest management (IPM) .

Chapter 1 defines IPM as a strategy that uses a wide range of tactics and reduces reliance on pesticides as the only method. The goal is to prevent pests from reaching economically or aesthetically damaging levels with the least risk to the environment. Economic damage is yield, grade, or quality in cotton, peanuts, pecans, and peaches. Aesthetic damage is how a turf stand, ornamental bed, or right-of-way looks to the people who pay for it. Public-health mosquito work adds disease risk that is not a crop yield and not a golf-green color.

Spraying first fails that definition for concrete reasons you should be able to recite:

You may treat the wrong organism (fungicide on TSWV; insecticide on dollar spot; adult fog on a larval bucket).

You may treat the wrong stage (foliar spray for white grubs; a contact herbicide on johnsongrass rhizomes).

You may kill natural enemies and create a secondary pest (cotton mites after a pyrethroid).

You apply selection pressure that breeds resistance (Palmer amaranth and the "just use more" reflex).

You may violate the label if the site or pest is not listed — the label chapter comes next; IPM does not waive it.

IPM is not a promise that you will never use a pesticide. It is a promise that chemical control, when used, sits after identification, monitoring, and a management goal, and beside biological, mechanical, cultural, physical, genetic, and regulatory tools.

The five IPM components (Core Manual Chapter 1)

Memorize the five components in order. Older short lists that collapse IPM into "scout, spray, write it down" are not the 2nd-edition Chapter 1 sequence Georgia manuals follow.

Identify the pest and understand its biology. Section 5.1. Key pests, occasional pests, and secondary pests live here. If you cannot name the organism, you do not have an IPM program; you have a guess.

Monitor the pest to be managed. Scouting, traps, mosquito landing counts or larval dips, weed mapping, disease weather watchers, degree-days where your category uses them. Monitoring is repeated. One windshield tour of a pecan orchard is not a monitoring program. Rule 40-21-5 application records ask for target pest — you cannot honestly fill that field if you never monitored.

Develop the pest management goal. This is where thresholds live. The goal may be suppress, prevent, or, in regulatory programs, eradicate. It is not "zero insects on every cotton leaf" and not "brown turf is always a pesticide emergency."

Implement the integrated pest management program. Combine compatible methods from Section 5.2. Hit the susceptible stage. Use pesticides when the goal and the label say they are needed, not because the tank is already filled from the last job.

Record and evaluate results. Did the tactic work? Did mites flare? Did the right-of-way rhizomes return? Evaluation feeds next week's decision. Georgia contractors record all applications; commercial applicators not on a contractor record RUP and state-restricted uses. The pests domain still cares that evaluation exists even when a particular job used only cultural sanitation.

Component What you actually do in Georgia Failure mode the exam likes

Identify and biology Name Palmer vs nutsedge; TSWV vs leaf spot; grub vs chinch bug Treat "damage" as a pest name

  • Monitor Sweep nets in cotton; pecan weevil traps; larval dips; weed maps Calendar spraying with no counts
  • Management goal Action threshold vs aesthetic threshold vs public-health trigger Zero-pest as the only goal

Implement combination Rotation, sanitation, Bt trait, then a labeled spray if needed Chemical as the only tactic

Record and evaluate Target pest on the record; check whether mites or resistant weeds followed "We always use this jug" with no look-back

Loading diagram... IPM five components and the spray-first skip

Action thresholds versus aesthetic thresholds

Chapter 1's management-goal step is where turf companies and cotton consultants part ways, and the exam will make you say so out loud.

An economic injury level is the pest density at which damage equals the cost of control. An economic threshold or action threshold is a lower density at which you act so you never reach that injury level. In agronomic cotton and peanuts, that math is why you scout plant bugs, worms, weeds, and leaf spot instead of treating because a neighbor sprayed. Pecans and peaches use the same idea with orchard-specific counts, trap captures, and disease models: you are protecting nuts and fruit as commodities, not keeping a lawn camera-ready.

An aesthetic threshold is based on appearance , not bushels. A putting green, a Gwinnett HOA lawn, and a campus ornamental bed will trigger treatment at pest levels that would be ignored in a peanut field. That is not sloppy agronomy. It is a different management goal. It is also why Category 24 work can be pesticide-heavy if the contract defines "damage" as any blemish — IPM still requires identification and monitoring; it does not require you to pretend a lawn is a cotton crop. Conversely, a hay field or a low-visibility right-of-way interior may tolerate weed or insect levels a golf green cannot. Rights-of-way add safety and line-of-sight goals that are neither yield nor curb appeal: brush on a curve is a different threshold than a few winter annuals behind a fence.

Mosquito programs (Category 41, and government 31 ) use public-health and nuisance triggers: species, stage, landing rates, larval presence, and disease surveillance. Those are not peanut action thresholds and not HOA aesthetic thresholds. Source reduction and larval control still sit earlier in IPM than a default adulticide.

Write this contrast in one line: cotton and peanuts act on scouting economics; turf often acts on appearance; neither goal authorizes spraying before identification.

Pesticide resistance: rotate mode of action, do not pour more

Rule 40-21-3 General Standard 5. Pesticides includes "factors which influence effectiveness or lead to such problems as resistance to pesticides ." Chapter 1's effectiveness section is where Core Manual students meet the definition.

Resistance is a heritable change in a pest population : individuals that survive a pesticide pass that ability on. It is not a clogged nozzle, not a rain-fastness miss, and not "the product got weak in the jug." Repeated use of the same mode of action selects those survivors. Georgia's loudest field example is herbicide-resistant Palmer amaranth in cotton and peanuts. Insect and mite resistance, fungicide resistance in pecan scab or peanut leaf spot, and mosquito adulticide resistance are the same evolutionary story in other categories.

What the exam will not accept as a resistance plan:

  • Use more product or a higher-than-label rate
  • Spray more often with the same chemistry
  • Switch to a "hotter" product that has the same mode of action
  • Abandon scouting because "nothing works unless we drench it"

What Chapter 1 and resistance-management programs do accept:

Rotate modes of action (insecticide, herbicide, and fungicide grouping systems exist so you rotate sites of action , not brand names or signal words)

Use labeled rates — rates that are too low can select resistance; rates above the label are illegal and not a resistance cure

Use tank mixes of different modes of action only when the labels allow the mix

Keep non-chemical tactics in the program so every generation is not screened with the same chemistry (cultivation, sanitation, thresholds, biological conservation)

For Bt crops , follow refuge and trait-stewardship rules so susceptible insects are not eliminated from the landscape; keep scouting for pests the trait does not cover

Host resistance can itself be overcome if you treat the trait as a permanent chemical. That is why Section 5.2's Bt cotton example returns here: genetic control is an IPM tactic that still needs resistance management.

Close the chapter the way the sitting will close a pests item: identify, monitor, set the correct kind of threshold, combine methods, record what happened, and when you do use a pesticide, change the mode of action — do not turn up the volume.

National Core Manual Chapter 1 IPM component order