Study guide

7.2 Linear Functions, Slope, and Graphs

GED General Educational Development

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: GED Overview, Scoring, and Study Plan

GED Subjects and Scoring Registration, Retakes, and State Rules Diagnostic Study Plan

2 Chapter 6: GED Math Number Sense, Fractions, and Ratios

6.1 Integers, Fractions, Decimals, and Percent 6.2 Ratios, Rates, Proportions, and Unit Conversion 6.3 Powers, Roots, and Scientific Notation 6.4 Calculator vs. Noncalculator Number Strategy

3 Chapter 7: GED Math Algebra, Functions, and Expressions

7.1 Expressions, Equations, and Inequalities 7.2 Linear Functions, Slope, and Graphs 7.3 Systems, Quadratics, and Polynomials 7.4 Algebra Word-Problem Translation

4 Chapter 8: GED Math Geometry, Data, and Statistics

8.1 Area, Volume, and Composite Figures 8.2 Coordinate Geometry and Distance 8.3 Probability, Statistics, and Data Displays 8.4 Formula Sheet and Diagram Strategy

5 Chapter 2: Mathematical Reasoning and RLA

Algebra and Quantitative Problem Solving Geometry, Data, and Calculator Strategy RLA Reading, Language, and Essay

6 Chapter 9: GED RLA Reading Comprehension and Evidence

9.1 Main Idea, Detail, and Inference 9.2 Argument Claims, Evidence, and Purpose 9.3 Vocabulary, Tone, and Point of View 9.4 Paired Passages and Evidence Selection

7 Chapter 10: GED RLA Language Conventions and Extended Response

10.1 Sentence Structure, Punctuation, and Usage 10.2 Revision, Organization, and Word Choice 10.3 Extended Response Argument Analysis 10.4 Essay Planning, Writing, and Revision

8 Chapter 11: GED Science Life Science and Physical Science

11.1 Life Science Systems and the Human Body 11.2 Genetics, Evolution, and Ecosystems 11.3 Physical Science Forces, Energy, and Motion 11.4 Chemistry, Matter, and Reactions

9 Chapter 12: GED Science Data, Experiments, and Earth/Space Science

12.1 Variables, Hypotheses, and Experimental Design 12.2 Graphs, Tables, and Scientific Models 12.3 Earth, Space, and Environmental Systems 12.4 Science Short-Answer and Calculation Strategy

10 Chapter 3: Science, Social Studies, and Final Review

3.1 Science Data and Experiments 3.2 Social Studies Civics, Economics, and Sources 3.3 Final Week Test Strategy

11 Chapter 13: GED Social Studies Civics, Government, and U.S. History

13.1 Civics, Government, and Rights 13.2 Founding Documents and American Democracy 13.3 U.S. History Cause, Effect, and Change 13.4 Primary-Source Reading and Civic Argument

12 Chapter 14: GED Social Studies Economics, Geography, and Data

14.1 Economics: Markets, Labor, and Policy 14.2 Geography: Human Systems and Environment 14.3 Charts, Maps, Timelines, and Political Cartoons 14.4 Social Studies Argument and Evidence Traps

13 Chapter 4: GED Question Types and Score Improvement

4.1 Data, Graphics, and Source-Based Questions 4.2 Constructed Response and Evidence 4.3 Score-Band Improvement Plan

14 Chapter 15: GED Four-Subject Mock Tests and Final Readiness

15.1 Four-Subject Study Calendar 15.2 GED Ready Score Decisions 15.3 Mixed-Question Review Log 15.4 Final Week and Retake Strategy

15 Chapter 5: Full Practice, Test Day, and Retake Plan

Subject Practice Rotation Online vs Test Center Readiness Test Day and Retake Plan

7.2 Linear Functions, Slope, and Graphs

Key Takeaways Explain This Topic AI

The GED assesses slope from graphs, equations, AND tables, so practice converting freely among all three representations.

In y = mx + b, m is the slope or constant rate of change and b is the y-intercept or starting value when x = 0.

A proportional relationship has a graph through the origin and an equation of the form y = kx, with no constant added.

A relation is a function only when each input x has exactly one output y; use the vertical line test on a graph.

Function notation f(3) means substitute 3 for x inside the rule, NOT multiply f by 3.

Last updated: June 2026

GED Focus: Lines Model Real Rates

The GED targets for graphs and functions include locating coordinate points, finding slope from a graph, equation, or table, graphing two-variable linear equations, and evaluating linear or simple quadratic functions written in function notation. These items are concrete: they describe pay rates, distance over time, membership fees, savings plans, or fuel use, all of which a straight line can model.

Graphing items appear in the calculator-allowed section, but the TI-30XS MultiView is a scientific, not graphing, calculator, so it will NOT draw lines for you. You read slope and intercepts yourself.

The coordinate plane has four quadrants. A point such as (-3, 5) sits left of the y-axis and above the x-axis (Quadrant II). Getting the sign of each coordinate right is the foundation for plotting and for reading slope correctly.

Read y = mx + b Like a Sentence

The slope-intercept form is y = mx + b. The slope m is the change in y for each increase of 1 in x. The y-intercept b is the value of y when x = 0. A useful sentence: "start at b, then go up m for every step right."

  • Representation What to look for Example
  • Equation Coefficient of x y = 4x + 9 has slope 4, intercept 9
  • Graph Rise over run Up 6, right 3 gives slope 2
  • Table Change in y over change in x x up by 2, y up by 10 gives slope 5
  • Verbal model The unit rate $12 per hour means slope 12

Slope can be negative (the line falls), zero (a horizontal line, y = b), or undefined (a vertical line, x = a constant).

Worked Example: Table to Equation

A tutoring service charges a one-time sign-up fee plus an hourly rate.

  • Hours x Cost y
  • 1 45
  • 2 70
  • 3 95

The cost rises by 25 each time x increases by 1, so the slope is 25. Plug one point, say (1, 45), into y = mx + b: 45 = 25(1) + b, which gives b = 20. The equation is y = 25x + 20. In context, the $20 is the sign-up fee (the value at x = 0) and the $25 is the hourly rate. A classic trap is reporting 45 as the fee; 45 is the cost after one hour, not the starting value.

Functions and the One-Output Rule

A function assigns each input exactly one output. In a table, no x-value may pair with two different y-values. On a graph, apply the vertical line test : if any vertical line touches the graph more than once, it is not a function. A circle, for instance, fails the test.

Function notation simply names outputs. If f(x) = 2x + 7, then f(5) means replace every x with 5: f(5) = 2(5) + 7 = 17. The GED also tests reading values from a function table or graph, such as "find f(3)" by locating x = 3 and reading the matching y. It does not mean f multiplied by 5. The GED may also reverse the task and give an output, asking which input produces it: if f(x) = 2x + 7 and the question states f(x) = 19, solve 2x + 7 = 19 to find x = 6.

Worked Example and Test-Day Checklist

Plan A costs y = 15x. Plan B is given by a table: at 2 months the cost is 40, and at 5 months the cost is 100. Plan A has slope 15. Plan B has slope (100 - 40) / (5 - 2) = 60 / 3 = 20. Plan B increases faster, regardless of where each plan starts.

Run this checklist on every graph item:

Identify what x and y measure, with units, before calculating.

Find the y-intercept at x = 0, not from the first listed point unless x is actually 0 there.

Compute slope as rise over run: change in y divided by change in x.

For proportional relationships, confirm the line passes through (0, 0).

To compare rates of change, compare slopes only; intercepts give starting values, not speed. A line starting at 50 rising by 2 grows slower than a line starting at 0 rising by 8.

Proportional vs. Non-Proportional

A proportional relationship has the form y = kx with no constant added, so its graph passes through the origin (0, 0) and k is both the slope and the unit rate. "$0.12 per text message" gives y = 0.12x, a proportional line through the origin. As soon as there is a flat fee, such as a $20 sign-up cost, the relationship is non-proportional (y = 25x + 20) and the line no longer hits the origin. The GED tests this distinction directly: a question may show a table and ask whether it is proportional, which is true only when every y/x ratio is identical and the line would pass through (0, 0).

Always check the ratio at two or more points before deciding.