Study guide
8.3 Probability, Statistics, and Data Displays
GED General Educational Development
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: GED Overview, Scoring, and Study Plan
GED Subjects and Scoring Registration, Retakes, and State Rules Diagnostic Study Plan
2 Chapter 6: GED Math Number Sense, Fractions, and Ratios
6.1 Integers, Fractions, Decimals, and Percent 6.2 Ratios, Rates, Proportions, and Unit Conversion 6.3 Powers, Roots, and Scientific Notation 6.4 Calculator vs. Noncalculator Number Strategy
3 Chapter 7: GED Math Algebra, Functions, and Expressions
7.1 Expressions, Equations, and Inequalities 7.2 Linear Functions, Slope, and Graphs 7.3 Systems, Quadratics, and Polynomials 7.4 Algebra Word-Problem Translation
4 Chapter 8: GED Math Geometry, Data, and Statistics
8.1 Area, Volume, and Composite Figures 8.2 Coordinate Geometry and Distance 8.3 Probability, Statistics, and Data Displays 8.4 Formula Sheet and Diagram Strategy
5 Chapter 2: Mathematical Reasoning and RLA
Algebra and Quantitative Problem Solving Geometry, Data, and Calculator Strategy RLA Reading, Language, and Essay
6 Chapter 9: GED RLA Reading Comprehension and Evidence
9.1 Main Idea, Detail, and Inference 9.2 Argument Claims, Evidence, and Purpose 9.3 Vocabulary, Tone, and Point of View 9.4 Paired Passages and Evidence Selection
7 Chapter 10: GED RLA Language Conventions and Extended Response
10.1 Sentence Structure, Punctuation, and Usage 10.2 Revision, Organization, and Word Choice 10.3 Extended Response Argument Analysis 10.4 Essay Planning, Writing, and Revision
8 Chapter 11: GED Science Life Science and Physical Science
11.1 Life Science Systems and the Human Body 11.2 Genetics, Evolution, and Ecosystems 11.3 Physical Science Forces, Energy, and Motion 11.4 Chemistry, Matter, and Reactions
9 Chapter 12: GED Science Data, Experiments, and Earth/Space Science
12.1 Variables, Hypotheses, and Experimental Design 12.2 Graphs, Tables, and Scientific Models 12.3 Earth, Space, and Environmental Systems 12.4 Science Short-Answer and Calculation Strategy
10 Chapter 3: Science, Social Studies, and Final Review
3.1 Science Data and Experiments 3.2 Social Studies Civics, Economics, and Sources 3.3 Final Week Test Strategy
11 Chapter 13: GED Social Studies Civics, Government, and U.S. History
13.1 Civics, Government, and Rights 13.2 Founding Documents and American Democracy 13.3 U.S. History Cause, Effect, and Change 13.4 Primary-Source Reading and Civic Argument
12 Chapter 14: GED Social Studies Economics, Geography, and Data
14.1 Economics: Markets, Labor, and Policy 14.2 Geography: Human Systems and Environment 14.3 Charts, Maps, Timelines, and Political Cartoons 14.4 Social Studies Argument and Evidence Traps
13 Chapter 4: GED Question Types and Score Improvement
4.1 Data, Graphics, and Source-Based Questions 4.2 Constructed Response and Evidence 4.3 Score-Band Improvement Plan
14 Chapter 15: GED Four-Subject Mock Tests and Final Readiness
15.1 Four-Subject Study Calendar 15.2 GED Ready Score Decisions 15.3 Mixed-Question Review Log 15.4 Final Week and Retake Strategy
15 Chapter 5: Full Practice, Test Day, and Retake Plan
Subject Practice Rotation Online vs Test Center Readiness Test Day and Retake Plan
8.3 Probability, Statistics, and Data Displays
Key Takeaways Explain This Topic AI
GED Math data questions require reading the display first: title, axis labels, scale, units, and any key or legend before calculating.
Mean, median, mode, and range describe data differently, so the right measure depends on the question and on whether outliers are present.
A missing value behind an average is found by computing total = mean * count, then subtracting the known values.
Simple probability is favorable outcomes divided by total equally likely outcomes; compound probability depends on whether the events are independent or change one another.
Bar graphs, circle graphs, dot plots, histograms, box plots, scatter plots, and two-way tables can all appear as GED data displays.
Last updated: June 2026
Read the Display Before the Numbers
GED Math data items test interpretation, not just arithmetic. The official assessment targets include bar graphs, circle graphs, dot plots, histograms, box plots, two-way tables, scatter plots, mean, median, mode, range, weighted average, and probability. That is a long list, but the routine is identical every time: read the title, read the labels, check the scale, then answer only what the display supports.
The scale changes everything. If a bar graph rises by 5 per gridline, a bar halfway between 20 and 25 is 22.5, not 21. If a circle graph gives percentages, convert to counts only when a total is provided; 30% of an unstated whole is not a number. If a scatter plot trends upward, it suggests association , but GED Math asks you to describe the pattern (positive, negative, or none; linear or nonlinear; presence of an outlier), not to claim that one variable causes the other.
Statistics Quick Table
- Measure How to find it GED use
- Mean Add all values, divide by the count Average amount, equal sharing
- Median Order the values, take the middle Typical value when outliers exist
- Mode The most frequent value Most common response or category
- Range Largest value minus smallest Spread from low to high
- Weighted average Sum of (value x weight), divided by total weight Categories with different counts
The mean is pulled toward extreme values, so when a data set has one very large or very small number, the median is the better 'typical' measure. Test items often hinge on exactly that distinction.
Worked Mean, Median, and Missing-Value Examples
Suppose four quiz scores are 72, 80, 85, and 91. The mean is (72 + 80 + 85 + 91) / 4 = 328 / 4 = 82. For the median of an even-sized list, average the two middle values once the data are ordered: (80 + 85) / 2 = 82.5. Always order before finding a median; an unordered list is the single most common median error.
Missing-value (work-backward) example. Five delivery times have a mean of 24 minutes. Four of them are 18, 22, 25, and 30. The total must be 5 * 24 = 120 minutes. The known total is 18 + 22 + 25 + 30 = 95. The missing time is 120 - 95 = 25 minutes. The formula total = mean * count is the engine of nearly every GED average problem, including 'what score do I need on the last test?' items.
Weighted-average example. A grade is 40% homework and 60% exam. With homework 90 and exam 80, the grade is 0.40 * 90 + 0.60 * 80 = 36 + 48 = 84, not the simple average of 85. The weights, not the raw count of categories, decide the result.
Data Displays at a Glance
Dot plot : each dot is one value on a number line; good for counting frequency and spotting the mode.
Histogram : groups numerical data into equal intervals (bins); shows distribution shape.
Box plot : marks minimum, lower quartile, median, upper quartile, and maximum; the box spans the interquartile range.
Scatter plot : compares two variables, such as hours studied versus score.
Bar graph : compares separate categories; circle graph : shows parts of one whole.
Probability Routine
Simple probability is favorable outcomes divided by total equally likely outcomes. If a bag holds 5 red, 3 blue, and 2 green tiles (10 total), then P(blue) = 3/10 and P(not blue) = 7/10, because the complement of an event is 1 minus its probability.
For compound events , decide whether the first event changes the second. A coin flip and a number-cube roll are independent , so multiply: P(heads and a 4) = 1/2 * 1/6 = 1/12. Drawing two tiles without replacement is dependent: after pulling one blue from the 10-tile bag, only 2 blue remain among 9 tiles, so P(blue, then blue) = 3/10 * 2/9 = 6/90 = 1/15. Treating a without-replacement draw as independent is a built-in trap answer. The word or usually means add (after avoiding double-counting), while and for independent events means multiply.
GED Data Checklist
Identify the source: table, graph, plot, or word problem.
Decide whether the item wants a count, a percent, a statistic, or a probability.
Order the data before finding a median.
Use total = mean * count for any missing-average problem.
Reduce probability fractions only after the setup is correct.
The most common wrong answers come from skipping step 1. Misreading a bar height, ignoring the axis scale, forgetting to order data, or treating a without-replacement draw as independent all produce arithmetic that looks tidy yet answers the wrong question.
Percent and probability overlap. GED probability is often phrased as a percent or a fraction, and a probability can never exceed 1 (or 100%). If you compute 4/3 or 120%, the setup is wrong, usually because favorable and total were reversed. To convert, 3/10 is 0.30 is 30%. Expected counts also appear: if a spinner lands on red with probability 1/4 and is spun 60 times, the expected number of red results is (1/4) * 60 = 15.
Two-way tables add one more skill: read the row total and column total carefully, because a conditional probability such as 'given the person is a student' uses only that row as the denominator, not the grand total of the whole table.