Study guide

4.3 Ratios, Proportions, Rates, Work and Time Problems

Ghana Armed Forces Officer Cadet Written Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Orientation & GAF Officer Selection Architecture

1.1 Ghana Military Academy (GMA) Cadet Selection Overview & Regulations 1.2 Selection Phases — Screening, Aptitude Test, BFT, OLT, Medical & Final Interview 1.3 Written Examination Strategy, Competitive Scoring & Test-Taking Tactics

2 Chapter 2: Verbal Reasoning — Comprehension & Text Analysis

2.1 Military & Strategic Reading Comprehension Strategies 2.2 Drawing Inferences, Identifying Author Intent & Central Themes 2.3 Critical Text Evaluation & Logical Paragraph Coherence

3 Chapter 3: Verbal Reasoning — Grammar, Vocabulary & Usage

3.1 Lexicon Mastery — High-Frequency Vocabulary, Antonyms & Synonyms 3.2 English Grammar, Syntax, Subject-Verb Agreement & Tense Consistency 3.3 Verbal Analogies, Idiomatic Expressions & Sentence Correction

4 Chapter 4: Quantitative Aptitude — Arithmetic & Business Math

4.1 Arithmetic Operations, Number Properties & Order of Operations 4.2 Percentages, Profit and Loss, Simple and Compound Interest 4.3 Ratios, Proportions, Rates, Work and Time Problems

5 Chapter 5: Quantitative Aptitude — Algebra & Word Problems

5.1 Linear Equations, Inequalities & Simultaneous Systems 5.2 Quadratic Equations, Polynomials & Algebraic Factoring 5.3 Mathematical Word Problems & Quantitative Formulation

6 Chapter 6: Quantitative Aptitude — Geometry, Mensuration & Data

6.1 Geometric Principles — Angles, Lines, Triangles & Polygons 6.2 Mensuration — Perimeter, Area, Surface Area & Volume 6.3 Basic Probability, Statistics & Data Interpretation

7 Chapter 7: Logical Reasoning — Patterns, Sequences & Ciphers

7.1 Number, Letter & Alphanumeric Series 7.2 Coding, Decoding & Substitution Ciphers 7.3 Diagrammatic, Abstract & Matrix Pattern Recognition

8 Chapter 8: Logical Reasoning — Analytical Deduction & Arrangements

8.1 Formal Syllogisms, Venn Diagrams & Deductive Logic 8.2 Direction Sense, Distance Tracking & Cardinal Navigation 8.3 Linear and Circular Seating Arrangements & Blood Relations Logic

9 Chapter 9: General Knowledge — Ghanaian History & Governance

9.1 Pre-Colonial, Colonial Era & Ghana's Independence (1957) 9.2 The Republics, Constitutional Transitions & Key National Leaders 9.3 The 1992 Constitution, Arms of Government & Public Institutions

10 Chapter 10: General Knowledge — Geography, Defense & Security Architecture

10.1 Geography of Ghana — 16 Regions, Capitals, Physical Features & Resources 10.2 Ghana Armed Forces Structure — Army, Navy, Air Force, Command & Ranks 10.3 National Security, Peacekeeping Operations (UN/AU/ECOWAS) & Regional Security

4.3 Ratios, Proportions, Rates, Work and Time Problems

Key Takeaways Explain This Topic AI

The multi-variable chain rule identity (M1 * D1 * H1 * E1) / W1 = (M2 * D2 * H2 * E2) / W2 balances variable labor forces, shift lengths, project timelines, and work outputs.

In work-and-time systems, individual work capacities add linearly as daily rates (1 / T_total = Sum of 1 / t_i); drainage outlets or consumption drains act as negative work components.

Average speed across equal outbound and return distances is the harmonic mean of the speeds, v_avg = (2 * v1 * v2) / (v1 + v2), not the simple arithmetic average.

Relative velocity dynamics mandate that bodies closing distance in opposite directions add velocities (v1 + v2), while bodies traveling in the same pursuit direction subtract velocities (|v1 - v2|).

Last updated: October 2026

Ratios, Proportions, Rates, Work and Time Problems

Tactical planning is fundamentally an exercise in rate balancing and proportional allocation. Military engineers must determine how many combat pioneer personnel and operational hours are required to construct defensive berms or bridge crossings before an advancing adversary arrives. Staff officers must calculate fuel flow rates through logistical pipeline bladders, pace mechanized convoys across differing road surfaces, and schedule rendezvous timings between dispersed reconnaissance patrols.

On the Ghana Armed Forces Officer Cadet Written Examination, questions on ratios, work-time mechanics, and kinematic motion test a candidate's structured problem-solving discipline and mental speed. Deploying standardized rate templates and algebraic identities prevents mathematical confusion under exam conditions.

Ratio Theory, Compound Ratios & Proportional Division

A ratio is an ordered comparison of two or more quantities of identical dimension, expressed as a : b a:b a : b or a b \frac{a}{b} b a ​ . The first term a a a is the antecedent , and the second term b b b is the consequent .

Properties and Classification of Ratios

Scale Invariance : Multiplying or dividing both antecedent and consequent by a non-zero constant k k k preserves the ratio: a : b = k a : k b a:b = ka:kb a : b = ka : kb .

Compound Ratio : The compound ratio of two ratios a : b a:b a : b and c : d c:d c : d is the product of their terms: a b × c d = a c b d \frac{a}{b} \times \frac{c}{d} = \frac{ac}{bd} b a ​ × d c ​ = b d a c ​ , written as a c : b d ac:bd a c : b d .

Power and Root Ratios :

  • Duplicate Ratio : a 2 : b 2 a^2:b^2 a 2 : b 2
  • Sub-duplicate Ratio : a : b \sqrt{a}:\sqrt{b} a ​ : b ​
  • Triplicate Ratio : a 3 : b 3 a^3:b^3 a 3 : b 3
  • Sub-triplicate Ratio : a 3 : b 3 \sqrt[3]{a}:\sqrt[3]{b} 3 a ​ : 3 b ​
  • Continued Ratio Unification

A standard test item provides pairwise ratios (e.g., A : B A:B A : B and B : C B:C B : C ) and requires unifying them into a continuous multi-term ratio A : B : C A:B:C A : B : C .

A : B B : C ⟹ A : B : C = ( A × B 2 ) : ( B 1 × B 2 ) : ( B 1 × C ) \begin{matrix} A & : & B \\ & & B & : & C \end{matrix} \implies A:B:C = (A \times B_2) : (B_1 \times B_2) : (B_1 \times C) A ​ : ​ B B ​ : ​ C ​ ⟹ A : B : C = ( A × B 2 ​ ) : ( B 1 ​ × B 2 ​ ) : ( B 1 ​ × C )

Worked Example : In a combined-arms brigade, the ratio of infantry to armor personnel is 5 : 3 5:3 5 : 3 , and the ratio of armor to artillery personnel is 4 : 7 4:7 4 : 7 . What is the continuous ratio of Infantry to Armor to Artillery?

Align on common term (Armor): Multiply the first ratio by 4 4 4 and the second ratio by 3 3 3 :

Infantry : Armor = 5 × 4 : 3 × 4 = 20 : 12 \text{Infantry} : \text{Armor} = 5 \times 4 : 3 \times 4 = 20 : 12 Infantry : Armor = 5 × 4 : 3 × 4 = 20 : 12

Armor : Artillery = 4 × 3 : 7 × 3 = 12 : 21 \text{Armor} : \text{Artillery} = 4 \times 3 : 7 \times 3 = 12 : 21 Armor : Artillery = 4 × 3 : 7 × 3 = 12 : 21

Combined Ratio: Infantry : Armor : Artillery = 20 : 12 : 21 \text{Infantry} : \text{Armor} : \text{Artillery} = 20 : 12 : 21 Infantry : Armor : Artillery = 20 : 12 : 21 .

Proportional Division of Logistical Assets

To divide a total quantity Q Q Q into parts proportional to a : b : c a : b : c a : b : c : Sum of Ratio Parts S = a + b + c \text{Sum of Ratio Parts } S = a + b + c Sum of Ratio Parts S = a + b + c Part A = a S × Q , Part B = b S × Q , Part C = c S × Q \text{Part } A = \frac{a}{S} \times Q, \quad \text{Part } B = \frac{b}{S} \times Q, \quad \text{Part } C = \frac{c}{S} \times Q Part A = S a ​ × Q , Part B = S b ​ × Q , Part C = S c ​ × Q

Operational Scenario : A logistical consignment of 1 , 800 1,800 1 , 800 mortar shells is distributed among forward outposts Alpha, Bravo, and Charlie in the ratio 4 : 5 : 9 4:5:9 4 : 5 : 9 .

Total ratio parts: S = 4 + 5 + 9 = 18 S = 4 + 5 + 9 = 18 S = 4 + 5 + 9 = 18 .

Outpost Alpha: 4 18 × 1800 = 400 \frac{4}{18} \times 1800 = 400 18 4 ​ × 1800 = 400 shells.

Outpost Bravo: 5 18 × 1800 = 500 \frac{5}{18} \times 1800 = 500 18 5 ​ × 1800 = 500 shells.

Outpost Charlie: 9 18 × 1800 = 900 \frac{9}{18} \times 1800 = 900 18 9 ​ × 1800 = 900 shells.

Variation & The Multi-Variable Chain Rule

Variation describes how a dependent variable changes in response to alterations in independent driving variables.

Direct Variation ( y ∝ x y \propto x y ∝ x ) : y = k x ⟹ y 1 x 1 = y 2 x 2 y = kx \implies \frac{y_1}{x_1} = \frac{y_2}{x_2} y = k x ⟹ x 1 ​ y 1 ​ ​ = x 2 ​ y 2 ​ ​ .

Inverse Variation ( y ∝ 1 x y \propto \frac{1}{x} y ∝ x 1 ​ ) : y = k x ⟹ x 1 y 1 = x 2 y 2 y = \frac{k}{x} \implies x_1 y_1 = x_2 y_2 y = x k ​ ⟹ x 1 ​ y 1 ​ = x 2 ​ y 2 ​ .

Joint Variation : When an outcome depends directly on some factors and inversely on others.

The Master Chain Rule for Labor and Construction

In field engineering problems, the total work output W W W is directly proportional to the number of personnel ( M M M ), the duration in days ( D D D ), daily operating hours ( H H H ), and worker efficiency ( E E E ): W ∝ M × D × H × E W \propto M \times D \times H \times E W ∝ M × D × H × E

This yields the universal balanced chain rule invariant: M 1 × D 1 × H 1 × E 1 W 1 = M 2 × D 2 × H 2 × E 2 W 2 \frac{M_1 \times D_1 \times H_1 \times E_1}{W_1} = \frac{M_2 \times D_2 \times H_2 \times E_2}{W_2} W 1 ​ M 1 ​ × D 1 ​ × H 1 ​ × E 1 ​ ​ = W 2 ​ M 2 ​ × D 2 ​ × H 2 ​ × E 2 ​ ​

If worker efficiencies are equal, the efficiency term E E E cancels out: M 1 D 1 H 1 W 1 = M 2 D 2 H 2 W 2 \frac{M_1 D_1 H_1}{W_1} = \frac{M_2 D_2 H_2}{W_2} W 1 ​ M 1 ​ D 1 ​ H 1 ​ ​ = W 2 ​ M 2 ​ D 2 ​ H 2 ​ ​

Step-by-Step Chain Rule Execution

Problem : A field engineering detachment of 36 36 36 combat engineers working 8 8 8 hours per day constructs an anti-tank trench measuring 720 meters 720\text{ meters} 720 meters in 12 12 12 days. How many days will it take a reinforced detachment of 48 48 48 engineers working 9 9 9 hours per day to construct a similar trench measuring 1 , 080 meters 1,080\text{ meters} 1 , 080 meters ?

Identify Known Parameters :

M 1 = 36 M_1 = 36 M 1 ​ = 36 , D 1 = 12 D_1 = 12 D 1 ​ = 12 , H 1 = 8 H_1 = 8 H 1 ​ = 8 , W 1 = 720 W_1 = 720 W 1 ​ = 720

M 2 = 48 M_2 = 48 M 2 ​ = 48 , D 2 = ? D_2 = ? D 2 ​ = ? , H 2 = 9 H_2 = 9 H 2 ​ = 9 , W 2 = 1080 W_2 = 1080 W 2 ​ = 1080

Set up the Equation : 36 × 12 × 8 720 = 48 × D 2 × 9 1080 \frac{36 \times 12 \times 8}{720} = \frac{48 \times D_2 \times 9}{1080} 720 36 × 12 × 8 ​ = 1080 48 × D 2 ​ × 9 ​

Simplify the Left Side : 36 × 12 × 8 720 = 12 × 8 20 = 96 20 = 4.8 \frac{36 \times 12 \times 8}{720} = \frac{12 \times 8}{20} = \frac{96}{20} = 4.8 720 36 × 12 × 8 ​ = 20 12 × 8 ​ = 20 96 ​ = 4.8

Simplify the Right Side : 48 × 9 × D 2 1080 = 48 × D 2 120 = 2 × D 2 5 = 0.4 × D 2 \frac{48 \times 9 \times D_2}{1080} = \frac{48 \times D_2}{120} = \frac{2 \times D_2}{5} = 0.4 \times D_2 1080 48 × 9 × D 2 ​ ​ = 120 48 × D 2 ​ ​ = 5 2 × D 2 ​ ​ = 0.4 × D 2 ​

Solve for D 2 D_2 D 2 ​ : 4.8 = 0.4 × D 2 ⟹ D 2 = 4.8 0.4 = 12 days 4.8 = 0.4 \times D_2 \implies D_2 = \frac{4.8}{0.4} = 12\text{ days} 4.8 = 0.4 × D 2 ​ ⟹ D 2 ​ = 0.4 4.8 ​ = 12 days

The reinforced detachment requires exactly 12 12 12 days.

Work and Time Mathematics & Negative Drainage Rates

Work and time problems are solved by converting total project deliverables into unitary daily rates.

The Reciprocal Work Rate Principle

If an operative or unit can complete an entire project in T T T days, their daily work rate is 1 T \frac{1}{T} T 1 ​ of the project per day. When multiple units cooperate independently, their individual work rates sum linearly: Combined Work Rate R comb = 1 t 1 + 1 t 2 + ⋯ + 1 t n \text{Combined Work Rate } R_{\text{comb}} = \frac{1}{t_1} + \frac{1}{t_2} + \dots + \frac{1}{t_n} Combined Work Rate R comb ​ = t 1 ​ 1 ​ + t 2 ​ 1 ​ + ⋯ + t n ​ 1 ​ Total Days to Complete T comb = 1 R comb \text{Total Days to Complete } T_{\text{comb}} = \frac{1}{R_{\text{comb}}} Total Days to Complete T comb ​ = R comb ​ 1 ​

Two Workers ( A A A and B B B ) : T comb = t A t B t A + t B T_{\text{comb}} = \frac{t_A t_B}{t_A + t_B} T comb ​ = t A ​ + t B ​ t A ​ t B ​ ​

Three Workers ( A A A , B B B , and C C C ) : 1 T comb = 1 t A + 1 t B + 1 t C = b c + a c + a b a b c ⟹ T comb = a b c a b + b c + c a \frac{1}{T_{\text{comb}}} = \frac{1}{t_A} + \frac{1}{t_B} + \frac{1}{t_C} = \frac{bc + ac + ab}{abc} \implies T_{\text{comb}} = \frac{abc}{ab + bc + ca} T comb ​ 1 ​ = t A ​ 1 ​ + t B ​ 1 ​ + t C ​ 1 ​ = ab c b c + a c + ab ​ ⟹ T comb ​ = ab + b c + c a ab c ​

Worker Efficiency Ratios

When problem statements specify that Worker A A A is twice as efficient as Worker B B B ( E A = 2 E B E_A = 2 E_B E A ​ = 2 E B ​ ), then for any fixed task, the time required by A A A is half the time required by B B B ( t A = t B 2 t_A = \frac{t_B}{2} t A ​ = 2 t B ​ ​ ).

Negative Work: Pipes, Cisterns & Fuel Bladders

In liquid fuel supply and drainage problems, filling pipes represent positive work, while consumption drainage outlets or puncture leaks represent negative work: Net Rate R net = ∑ 1 T fill − ∑ 1 T drain \text{Net Rate } R_{\text{net}} = \sum \frac{1}{T_{\text{fill}}} - \sum \frac{1}{T_{\text{drain}}} Net Rate R net ​ = ∑ T fill ​ 1 ​ − ∑ T drain ​ 1 ​ Net Time to Fill T = 1 R net \text{Net Time to Fill } T = \frac{1}{R_{\text{net}}} Net Time to Fill T = R net ​ 1 ​

Worked Logistics Example : A forward aviation fuel bladder can be filled by Pipe A in 6 6 6 hours and by Pipe B in 8 8 8 hours. A gravity distribution pipe drains the full bladder to supply refueling helicopters in 12 12 12 hours. If both inflow pipes and the drainage pipe are opened simultaneously, how long does it take to fill an empty bladder?

Establish Individual Hourly Rates :

  • Rate of Pipe A: + 1 6 +\frac{1}{6} + 6 1 ​
  • Rate of Pipe B: + 1 8 +\frac{1}{8} + 8 1 ​
  • Rate of Drainage Pipe: − 1 12 -\frac{1}{12} − 12 1 ​

Sum to Find Net Hourly Inflow Rate : R net = 1 6 + 1 8 − 1 12 R_{\text{net}} = \frac{1}{6} + \frac{1}{8} - \frac{1}{12} R net ​ = 6 1 ​ + 8 1 ​ − 12 1 ​ Common denominator of { 6 , 8 , 12 } \{6, 8, 12\} { 6 , 8 , 12 } is 24 24 24 : R net = 4 24 + 3 24 − 2 24 = 4 + 3 − 2 24 = 5 24 bladder per hour R_{\text{net}} = \frac{4}{24} + \frac{3}{24} - \frac{2}{24} = \frac{4 + 3 - 2}{24} = \frac{5}{24}\text{ bladder per hour} R net ​ = 24 4 ​ + 24 3 ​ − 24 2 ​ = 24 4 + 3 − 2 ​ = 24 5 ​ bladder per hour

Invert to Find Net Fill Time : T = 24 5 = 4.8 hours = 4 hours and 48 minutes T = \frac{24}{5} = 4.8\text{ hours} = 4\text{ hours and } 48\text{ minutes} T = 5 24 ​ = 4.8 hours = 4 hours and 48 minutes

The bladder reaches full operational capacity in 4 4 4 hours and 48 48 48 minutes.

Time, Speed, and Distance Kinetics

The kinematics of troop movements and vehicular transport rest upon the foundational relationship: Distance = Speed × Time ⟺ D = v × t \text{Distance } = \text{Speed} \times \text{Time} \iff D = v \times t Distance = Speed × Time ⟺ D = v × t

Essential Unit Conversion Factors

Velocity in military operations is frequently expressed interchangeably in kilometers per hour ( km/h \text{km/h} km/h ) and meters per second ( m/s \text{m/s} m/s ): 1 km/h = 1 , 000 m 3 , 600 s = 5 18 m/s 1\text{ km/h} = \frac{1,000\text{ m}}{3,600\text{ s}} = \frac{5}{18}\text{ m/s} 1 km/h = 3 , 600 s 1 , 000 m ​ = 18 5 ​ m/s 1 m/s = 18 5 km/h = 3.6 km/h 1\text{ m/s} = \frac{18}{5}\text{ km/h} = 3.6\text{ km/h} 1 m/s = 5 18 ​ km/h = 3.6 km/h

To convert from km/h \text{km/h} km/h to m/s \text{m/s} m/s , multiply by 5 18 \frac{5}{18} 18 5 ​ .

Example : 72 km/h = 72 × 5 18 = 20 m/s 72\text{ km/h} = 72 \times \frac{5}{18} = 20\text{ m/s} 72 km/h = 72 × 18 5 ​ = 20 m/s .

To convert from m/s \text{m/s} m/s to km/h \text{km/h} km/h , multiply by 18 5 \frac{18}{5} 5 18 ​ .

Example : 25 m/s = 25 × 18 5 = 90 km/h 25\text{ m/s} = 25 \times \frac{18}{5} = 90\text{ km/h} 25 m/s = 25 × 5 18 ​ = 90 km/h .

Average Speed: The Harmonic Mean Principle

Average speed is defined as the total distance traversed divided by the total elapsed time: v avg = Total Distance Total Time v_{\text{avg}} = \frac{\text{Total Distance}}{\text{Total Time}} v avg ​ = Total Time Total Distance ​

Special Case: Equal Distance Segments (Harmonic Mean) : When a vehicle travels a distance d d d at speed v 1 v_1 v 1 ​ and returns along the same distance d d d at speed v 2 v_2 v 2 ​ , the average speed is NOT the arithmetic mean v 1 + v 2 2 \frac{v_1 + v_2}{2} 2 v 1 ​ + v 2 ​ ​ . Because more time is spent at the slower speed, the average speed is given by the harmonic mean : v avg = 2 d d v 1 + d v 2 = 2 v 1 v 2 v 1 + v 2 v_{\text{avg}} = \frac{2d}{\frac{d}{v_1} + \frac{d}{v_2}} = \frac{2 v_1 v_2}{v_1 + v_2} v avg ​ = v 1 ​ d ​ + v 2 ​ d ​ 2 d ​ = v 1 ​ + v 2 ​ 2 v 1 ​ v 2 ​ ​ Example : A patrol vehicle travels to an outpost at 60 km/h 60\text{ km/h} 60 km/h and returns at 40 km/h 40\text{ km/h} 40 km/h : v avg = 2 × 60 × 40 60 + 40 = 4 , 800 100 = 48 km/h v_{\text{avg}} = \frac{2 \times 60 \times 40}{60 + 40} = \frac{4,800}{100} = 48\text{ km/h} v avg ​ = 60 + 40 2 × 60 × 40 ​ = 100 4 , 800 ​ = 48 km/h

Special Case: Equal Travel Time Segments (Arithmetic Mean) : When a vehicle travels for time t t t at speed v 1 v_1 v 1 ​ and for an identical time t t t at speed v 2 v_2 v 2 ​ , the average speed is the arithmetic mean: v avg = v 1 t + v 2 t 2 t = v 1 + v 2 2 v_{\text{avg}} = \frac{v_1 t + v_2 t}{2t} = \frac{v_1 + v_2}{2} v avg ​ = 2 t v 1 ​ t + v 2 ​ t ​ = 2 v 1 ​ + v 2 ​ ​

Convoy and Obstacle Crossing Mechanics

When a moving body with non-negligible physical length L 1 L_1 L 1 ​ (e.g., a motorized column or military freight train) crosses a landmark:

Crossing a Stationary Point Object (Tree, Sentry Post) : Distance Traversed = L 1 , t = L 1 v \text{Distance Traversed} = L_1, \qquad t = \frac{L_1}{v} Distance Traversed = L 1 ​ , t = v L 1 ​ ​

Crossing an Extended Stationary Platform / Bridge / Defile ( L 2 L_2 L 2 ​ ) : Distance Traversed = L 1 + L 2 , t = L 1 + L 2 v \text{Distance Traversed} = L_1 + L_2, \qquad t = \frac{L_1 + L_2}{v} Distance Traversed = L 1 ​ + L 2 ​ , t = v L 1 ​ + L 2 ​ ​

Crossing Another Moving Unit ( L 2 L_2 L 2 ​ ) : Distance Traversed = L 1 + L 2 , t = L 1 + L 2 v rel \text{Distance Traversed} = L_1 + L_2, \qquad t = \frac{L_1 + L_2}{v_{\text{rel}}} Distance Traversed = L 1 ​ + L 2 ​ , t = v rel ​ L 1 ​ + L 2 ​ ​

Relative Speed, Tactical Pacing & Rendezvous Problems

Relative velocity defines the rate at which the separation distance between two mobile bodies changes. OPPOSITE DIRECTIONS (Closing In / Head-on Approach):

  • [Unit A: v1] ====>> <<==== [Unit B: v2]
  • Relative Speed = v1 + v2

SAME DIRECTION (Pursuit / Overtaking):

  • [Unit A: v1] ====================>>
  • [Unit B: v2] ============>>
  • Relative Speed = |v1 - v2|
  • 1. Relative Velocity Formulas

Moving in Opposite Directions (Approaching or Receding) : The distance between the units closes or widens at the sum of their speeds: v rel = v 1 + v 2 v_{\text{rel}} = v_1 + v_2 v rel ​ = v 1 ​ + v 2 ​ Time to Rendezvous / Collision = Initial Separation Distance v 1 + v 2 \text{Time to Rendezvous / Collision} = \frac{\text{Initial Separation Distance}}{v_1 + v_2} Time to Rendezvous / Collision = v 1 ​ + v 2 ​ Initial Separation Distance ​

Moving in the Same Direction (Pursuit / Interception) : The distance between the units changes at the difference of their speeds: v rel = v faster − v slower = ∣ v 1 − v 2 ∣ v_{\text{rel}} = v_{\text{faster}} - v_{\text{slower}} = |v_1 - v_2| v rel ​ = v faster ​ − v slower ​ = ∣ v 1 ​ − v 2 ​ ∣ Time to Overtake = Lead Distance v faster − v slower \text{Time to Overtake} = \frac{\text{Lead Distance}}{v_{\text{faster}} - v_{\text{slower}}} Time to Overtake = v faster ​ − v slower ​ Lead Distance ​

2. Worked Interception Problem: Convoy Pursuit

A motorized logistics convoy departs a supply base heading north along a highway at a steady speed of 54 km/h 54\text{ km/h} 54 km/h . Exactly 30 minutes 30\text{ minutes} 30 minutes later, a fast armored scout car departs the same base in pursuit along the identical route at a speed of 90 km/h 90\text{ km/h} 90 km/h . At what distance from the supply base will the scout car intercept the logistics convoy?

Determine the Convoy's Lead Distance :

Lead time: 30 minutes = 0.5 hours 30\text{ minutes} = 0.5\text{ hours} 30 minutes = 0.5 hours .

Distance covered by convoy prior to scout car departure: D lead = 54 km/h × 0.5 h = 27 km D_{\text{lead}} = 54\text{ km/h} \times 0.5\text{ h} = 27\text{ km} D lead ​ = 54 km/h × 0.5 h = 27 km

Calculate Relative Velocity :

Both units move in the same direction: v rel = v scout − v convoy = 90 − 54 = 36 km/h v_{\text{rel}} = v_{\text{scout}} - v_{\text{convoy}} = 90 - 54 = 36\text{ km/h} v rel ​ = v scout ​ − v convoy ​ = 90 − 54 = 36 km/h

Compute Time Required to Close the Separation Gap : t = D lead v rel = 27 km 36 km/h = 0.75 hours = 45 minutes t = \frac{D_{\text{lead}}}{v_{\text{rel}}} = \frac{27\text{ km}}{36\text{ km/h}} = 0.75\text{ hours} = 45\text{ minutes} t = v rel ​ D lead ​ ​ = 36 km/h 27 km ​ = 0.75 hours = 45 minutes

Calculate Total Distance Traveled by the Scout Car : D = v scout × t = 90 km/h × 0.75 h = 67.5 km D = v_{\text{scout}} \times t = 90\text{ km/h} \times 0.75\text{ h} = 67.5\text{ km} D = v scout ​ × t = 90 km/h × 0.75 h = 67.5 km

Verification: In the total 1.25 hours 1.25\text{ hours} 1.25 hours of convoy motion ( 0.5 h lead + 0.75 h pursuit 0.5\text{ h lead} + 0.75\text{ h pursuit} 0.5 h lead + 0.75 h pursuit ), the convoy travels 54 × 1.25 = 67.5 km 54 \times 1.25 = 67.5\text{ km} 54 × 1.25 = 67.5 km . The interception occurs exactly 67.5 km 67.5\text{ km} 67.5 km from the base camp.

Comprehensive Kinematic Reference Matrix

Problem Type Governing Condition Mathematical Formulation Direct Operational Application

Unitary Chain Rule Multi-variable labor allocation M 1 D 1 H 1 W 1 = M 2 D 2 H 2 W 2 \frac{M_1 D_1 H_1}{W_1} = \frac{M_2 D_2 H_2}{W_2} W 1 ​ M 1 ​ D 1 ​ H 1 ​ ​ = W 2 ​ M 2 ​ D 2 ​ H 2 ​ ​ Trench construction, fortification engineering.

Combined Work Rate Collaborative task completion 1 T = 1 t 1 + 1 t 2 + … \frac{1}{T} = \frac{1}{t_1} + \frac{1}{t_2} + \dots T 1 ​ = t 1 ​ 1 ​ + t 2 ​ 1 ​ + … Multi-detachment logistical loading operations.

Drainage System Inflow combined with drain/loss 1 T = 1 T fill − 1 T drain \frac{1}{T} = \frac{1}{T_{\text{fill}}} - \frac{1}{T_{\text{drain}}} T 1 ​ = T fill ​ 1 ​ − T drain ​ 1 ​ Aviation fuel reservoir bladder replenishment.

Average Speed Round trip across equal distance v avg = 2 v 1 v 2 v 1 + v 2 v_{\text{avg}} = \frac{2 v_1 v_2}{v_1 + v_2} v avg ​ = v 1 ​ + v 2 ​ 2 v 1 ​ v 2 ​ ​ Reconnaissance patrol vehicular route estimation.

Opposite Motion Head-on convergence t = Distance v 1 + v 2 t = \frac{\text{Distance}}{v_1 + v_2} t = v 1 ​ + v 2 ​ Distance ​ Rendezvous planning of two converging troop columns.

Pursuit Motion Single-direction chase t = Lead Distance v 1 − v 2 t = \frac{\text{Lead Distance}}{v_1 - v_2} t = v 1 ​ − v 2 ​ Lead Distance ​ Interception of hostile motorized reconnaissance units.

Loading diagram... Work-Rate and Motion Kinetics Solving Framework