Study guide
6.3 Functions, Notation & Transformations
GMAT Quantitative Reasoning Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Adaptive Scoring & Problem Solving Fundamentals
1.1 GMAT Focus Quant Overview & Question Mechanics 1.2 Mental Math, Estimation & Non-Calculator Strategies 1.3 Problem Solving Strategies & Elimination Techniques
2 Chapter 2: Number Theory & Integer Properties
2.1 Divisibility Rules, Prime Factorization & Factors 2.2 Greatest Common Factor (GCF) & Least Common Multiple (LCM) 2.3 Division Algorithm & Remainder Arithmetic 2.4 Parity, Signs & Consecutive Integer Properties 2.5 Real Numbers, the Number Line & Properties of Operations
3 Chapter 3: Fractions, Decimals, Ratios & Percentages
3.1 Fraction Arithmetic & Operations 3.2 Decimals, Place Value & Terminating Decimals 3.3 Ratios, Proportions & Variation 3.4 Percentages, Percent Change, Markup & Profit
4 Chapter 4: Exponents, Roots & Radical Expressions
4.1 Laws of Exponents & Exponential Equations 4.2 Radicals & Operations with Roots 4.3 Exponent & Root Inequalities and Traps
5 Chapter 5: Algebraic Expressions, Equations & Inequalities
5.1 Algebraic Manipulation & Special Products 5.2 Linear Equations & Systems of Equations 5.3 Quadratic Equations, Roots & Factoring 5.4 Inequalities, Sign Charts & Absolute Value 5.5 Formulas, Units & Measurement Conversion
6 Chapter 6: Coordinate Geometry & Linear Functions
6.1 The Coordinate Plane, Distance & Midpoint 6.2 Slope, Equations of Lines & Intercepts 6.3 Functions, Notation & Transformations
7 Chapter 7: Rates, Work, Motion & Mixture Word Problems
7.1 Uniform Motion: Rate, Time & Distance 7.2 Relative Speed, Catch-Up & Current/Wind Problems 7.3 Work-Rate & Cooperative Labor 7.4 Mixture & Weighted Average Word Problems
8 Chapter 8: Applied Word Problems, Sets & Sequences
8.1 Overlapping Sets & Venn Diagrams 8.2 Arithmetic & Geometric Sequences 8.3 Simple & Compound Interest Calculations 8.4 Age Problems & Discrete Optimization
9 Chapter 9: Descriptive Statistics & Data Distributions
9.1 Mean, Median & Mode 9.2 Range, Variance & Standard Deviation 9.3 Frequency Distributions & Distribution Properties
10 Chapter 10: Permutations, Combinations & Probability
10.1 Fundamental Counting Principle & Factorials 10.2 Combinations, Permutations & Grouping 10.3 Probability Rules: Independent & Dependent Events 10.4 Complementary Probability & Multi-Stage Events
6.3 Functions, Notation & Transformations
Key Takeaways Explain This Topic AI
Function notation f(x) sends each allowed input to one output. To evaluate f(argument), replace every x with the entire argument, in parentheses; f(a + b) is not f(a) + f(b) in general.
Defined operations (invented symbols such as a ★ b = a^2 − 2b) are functions of one or two variables. Evaluate the innermost parentheses first, and do not assume the symbol is commutative or associative.
Light composition is inside-out: (f ∘ g)(x) = f(g(x)) means compute u = g(x), then f(u). Order matters: f(g(x)) is not g(f(x)) in general.
The shift g(x) = f(x − h) + k moves the graph of f right h units and up k units. Inside the parentheses the horizontal sign looks backwards: f(x − 3) is a shift right, not left.
On Quant the real-number domain forbids a zero denominator and a negative even-root radicand. Official QR also asks you to read outputs and shifts from graphs and tables.
Last updated: August 2026
Function Notation and Evaluation
Official Guide algebra (OG 3.2) includes functions . On Problem Solving, a function is a rule that sends each allowed input to exactly one output. The notation y = f(x) means "the output of rule f at input x." The set of legal inputs is the domain ; the outputs that actually occur are the range .
Evaluating f(argument) means replacing every x with the entire argument, wrapped in parentheses.
Numerical. If f(x) = 3x² − 5x + 2, then f(4) = 3(16) − 5(4) + 2 = 48 − 20 + 2 = 30 .
Algebraic. f(x + 2) = 3(x + 2)² − 5(x + 2) + 2 = 3(x² + 4x + 4) − 5x − 10 + 2 = 3x² + 12x + 12 − 5x − 8 = 3x² + 7x + 4 .
Reciprocal input. f(1/x) = 3(1/x)² − 5(1/x) + 2 = 3/x² − 5/x + 2.
Trap: f(a + b) is not f(a) + f(b) in general, and f(kx) is not k · f(x) unless f happens to be a linear map through the origin. Expand; do not distribute the letter f.
A graph represents a function of x when it passes the vertical-line test : no vertical line hits the graph more than once. The vertical line x = k from Section 6.2 is itself not a function of x. A horizontal line y = c is a constant function.
Domain restrictions you actually need
On Quant, "all real numbers" is the default universe. Two restrictions appear over and over:
Denominator ≠ 0. If f(x) = (2x + 1)/(x² − 9), then x ≠ 3 and x ≠ −3.
Even-root radicand ≥ 0. If f(x) = √(16 − 4x), then 16 − 4x ≥ 0 → x ≤ 4.
You will not be asked for calculus-style range proofs. You may be asked for the minimum of a quadratic written as a(x − h)² + k: if a > 0 the minimum output is k, so the range is y ≥ k.
Defined Operations (Invented Symbols)
GMAC likes to define a new binary symbol on the spot. The stem looks like:
For all integers a and b, a ★ b = a² − 2ab + b .
That is just a function of two variables. Substitute in the given order, inner parentheses first . Do not assume the operation is commutative (a ★ b need not equal b ★ a) or associative ((a ★ b) ★ c need not equal a ★ (b ★ c)).
Worked example. a ★ b = a² − 2ab + b. Compute (3 ★ 2) ★ 4.
- Inner: 3 ★ 2 = 9 − 2(3)(2) + 2 = 9 − 12 + 2 = −1
- Outer: (−1) ★ 4 = (−1)² − 2(−1)(4) + 4 = 1 + 8 + 4 = 13
Trap arithmetic: treating (−1)² as −1 produces −1 + 8 + 4 = 11. Dropping the sign in −2ab produces 1 − 8 + 4 = −3. Square the first operand, including a negative base, then handle the middle term.
A unary box is the same idea with one input: ♣x = x² − 3x . Then ♣(♣2) = ♣(4 − 6) = ♣(−2) = 4 − 3(−2) = 4 + 6 = 10 . Nested defined operations are composition in costume.
When the definition has a denominator, the inner value cannot make that denominator 0 — the same domain rule as any rational function.
Typical GMAT operator checklist:
Copy the template with blanks: first operand everywhere the definition uses the first letter, second operand everywhere it uses the second letter.
If the stem writes (p ★ q) ★ r, compute p ★ q as a single number, then use that number as the new first operand with r.
If two remaining answers match your inner value, you stopped one layer too soon.
If the stem asks for a ★ b + b ★ a, compute both orders separately; they often differ.
Light Composition
A composite (f ∘ g)(x) = f(g(x)) is inside-out:
Compute u = g(x).
Compute f(u).
Order matters: f(g(x)) is not g(f(x)) in general.
Worked example (order). f(x) = x² − 4 and g(x) = 2x + 3.
- f(g(2)): inner g(2) = 7, outer f(7) = 49 − 4 = 45
- g(f(2)): inner f(2) = 0, outer g(0) = 3
Same ingredients, two different outputs. The engine is not being cute; it is testing whether you respect parentheses.
Worked example (solve a composite). f(x) = 2x² − 5, g(x) = 3x + 1, and k is a positive constant with f(g(k)) = 67.
- 2[g(k)]² − 5 = 67 → 2[g(k)]² = 72 → [g(k)]² = 36 → g(k) = 6 or g(k) = −6
- 3k + 1 = 6 → k = 5/3
- 3k + 1 = −6 → k = −7/3, discarded because k is positive
So k = 5/3 . The value −7/3 is the extra algebraic root. The value 6 is g(k), not k — a classic stop-one-layer-too-soon trap sitting next to 5/3 in a five-choice live item.
From a table , composition is a lookup chain. If a table gives g(2) = 5 and another row gives f(5) = 11, then f(g(2)) = 11. If f(5) is missing, the composition is not determined from the table. Never average table outputs or "combine" rows.
Shifts: f(x − h) + k
Official QR includes interpreting graphs . The transformation you must read at sight is the rigid shift of a graph:
g(x) = f(x − h) + k
- Piece Effect on the graph Effect on a point (x, y) on y = f(x)
- f(x) + k with k > 0 up k (x, y + k)
- f(x) − k with k > 0 down k (x, y − k)
- f(x − h) with h > 0 right h (x + h, y)
- f(x + h) with h > 0 left h (x − h, y)
- −f(x) reflect across the x-axis (x, −y)
- f(−x) reflect across the y-axis (−x, y)
The horizontal rule is the one testers reverse. f(x − 3) shifts right by 3, because the input that reproduces f(0) is now x = 3. Inside the parentheses, the sign looks backwards. Vertical shifts do what they look like: +k is up.
Track a landmark (vertex, intercept, or a plotted point) in a fixed order:
- Horizontal shift from the inside of f(·)
- Reflection −f if present
- Vertical shift ± k
Worked example. Vertex of y = f(x) is (3, −4). Let g(x) = −f(x + 2) + 3.
- f(x + 2) moves left 2: x-coordinate 3 − 2 = 1
- −f reflects over the x-axis: y-coordinate −(−4) = 4
- +3 moves up 3: y-coordinate 4 + 3 = 7
- New vertex (1, 7)
If you shift (3, −4) right because you saw "+2," you land on x = 5 and miss. If you forget the reflection and add 3 to −4, you land on y = −1, another designed neighbor.
Reading a graphed line or curve
When the item shows a graph rather than an equation:
A straight graph is a line: read two grid points, compute slope, read the y-intercept off the axis (Section 6.2).
A V-shape is typically y = a|x − h| + k: vertex (h, k), opening up if a > 0.
A shift of y = x² has vertex (h, k) from y = (x − h)² + k, which is exactly f(x − h) + k with f(x) = x².
If the graph of f is given and you need g(x) = f(x) + 2, every labeled y-coordinate increases by 2. If you need f(x − 1), every labeled point slides right 1; the y-value at a fixed x generally changes because you are reading a different input.
Worked example (graph reading). A plotted point on y = f(x) is (2, 5). On y = f(x − 4) + 1 that point moves to (2 + 4, 5 + 1) = (6, 6) . The output f(2) is still 5; you have moved the point , not substituted x = 2 into the new rule blindly without shifting.
Keep function evaluation and graph shifts in separate mental boxes when the stem mixes them. f(2) is a number. The graph of y = f(x − 2) is a picture moved right. Computing f(2) does not tell you where the moved graph crosses the y-axis unless you do the shift on an actual known point.