Study guide

6.2 Slope, Equations of Lines & Intercepts

GMAT Quantitative Reasoning Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Adaptive Scoring & Problem Solving Fundamentals

1.1 GMAT Focus Quant Overview & Question Mechanics 1.2 Mental Math, Estimation & Non-Calculator Strategies 1.3 Problem Solving Strategies & Elimination Techniques

2 Chapter 2: Number Theory & Integer Properties

2.1 Divisibility Rules, Prime Factorization & Factors 2.2 Greatest Common Factor (GCF) & Least Common Multiple (LCM) 2.3 Division Algorithm & Remainder Arithmetic 2.4 Parity, Signs & Consecutive Integer Properties 2.5 Real Numbers, the Number Line & Properties of Operations

3 Chapter 3: Fractions, Decimals, Ratios & Percentages

3.1 Fraction Arithmetic & Operations 3.2 Decimals, Place Value & Terminating Decimals 3.3 Ratios, Proportions & Variation 3.4 Percentages, Percent Change, Markup & Profit

4 Chapter 4: Exponents, Roots & Radical Expressions

4.1 Laws of Exponents & Exponential Equations 4.2 Radicals & Operations with Roots 4.3 Exponent & Root Inequalities and Traps

5 Chapter 5: Algebraic Expressions, Equations & Inequalities

5.1 Algebraic Manipulation & Special Products 5.2 Linear Equations & Systems of Equations 5.3 Quadratic Equations, Roots & Factoring 5.4 Inequalities, Sign Charts & Absolute Value 5.5 Formulas, Units & Measurement Conversion

6 Chapter 6: Coordinate Geometry & Linear Functions

6.1 The Coordinate Plane, Distance & Midpoint 6.2 Slope, Equations of Lines & Intercepts 6.3 Functions, Notation & Transformations

7 Chapter 7: Rates, Work, Motion & Mixture Word Problems

7.1 Uniform Motion: Rate, Time & Distance 7.2 Relative Speed, Catch-Up & Current/Wind Problems 7.3 Work-Rate & Cooperative Labor 7.4 Mixture & Weighted Average Word Problems

8 Chapter 8: Applied Word Problems, Sets & Sequences

8.1 Overlapping Sets & Venn Diagrams 8.2 Arithmetic & Geometric Sequences 8.3 Simple & Compound Interest Calculations 8.4 Age Problems & Discrete Optimization

9 Chapter 9: Descriptive Statistics & Data Distributions

9.1 Mean, Median & Mode 9.2 Range, Variance & Standard Deviation 9.3 Frequency Distributions & Distribution Properties

10 Chapter 10: Permutations, Combinations & Probability

10.1 Fundamental Counting Principle & Factorials 10.2 Combinations, Permutations & Grouping 10.3 Probability Rules: Independent & Dependent Events 10.4 Complementary Probability & Multi-Stage Events

6.2 Slope, Equations of Lines & Intercepts

Key Takeaways Explain This Topic AI

Slope m = (y2 − y1)/(x2 − x1). Positive m rises left-to-right, negative m falls, m = 0 is the horizontal line y = c, and a vertical line x = k has undefined slope because Δx = 0.

The three working forms are slope-intercept y = mx + b, point-slope y − y1 = m(x − x1), and standard Ax + By = C, where m = −A/B, the y-intercept is C/B, and the x-intercept is C/A.

Parallel non-vertical lines have equal slopes and different intercepts. Perpendicular non-vertical lines have negative-reciprocal slopes (m1 · m2 = −1). Every horizontal line is perpendicular to every vertical line.

Set y = 0 for the x-intercept and x = 0 for the y-intercept. The intercept triangle with the origin has area (1/2)|x-intercept × y-intercept|; a triangle bounded by two lines and an axis uses the same (1/2)|base × height| from coordinates.

A non-horizontal, non-vertical line that misses the origin passes through exactly three quadrants. The signs of m and b name the missed quadrant.

Last updated: August 2026

Slope as a Rate

Slope is the constant rate of change of y with respect to x along a non-vertical line:

m = (y₂ − y₁) / (x₂ − x₁) = rise / run

Order of the two points does not matter: swapping both pairs of coordinates cancels the two minus signs. Mixing the order — using y₂ − y₁ over x₁ − x₂ — flips the sign and is a common miss.

Four pictures, four algebraic facts:

  • Orientation Slope Equation shape As x increases
  • Rises left to right m > 0 y = (positive)x + b y increases
  • Falls left to right m < 0 y = (negative)x + b y decreases
  • Horizontal m = 0 y = c y stays c
  • Vertical undefined x = k x never changes

A vertical line through (4, −1) and (4, 9) has Δx = 0. The slope fraction is 10/0, which is undefined — not 0, and not a number you should write as "infinity" on Quant. Zero slope is the horizontal line y = constant. Mixing those two cases is one of the highest-yield coordinate traps in the section.

Worked example. Slope from (−3, 1) to (1, 9): m = (9 − 1)/(1 − (−3)) = 8/4 = 2 .

Worked example (horizontal vs vertical). Through (5, 7) and (−1, 7): Δy = 0, so m = 0 and the equation is y = 7. Through (5, 7) and (5, −2): Δx = 0, slope undefined, equation x = 5 .

Three distinct points A, B, and C are collinear when slope AB equals slope BC (and therefore AC). If the slopes disagree, the points are not on one line. Collinearity is an equal-rate test, not a triangle-angle theorem.

Three Forms of a Line

  • Form Equation When to use it
  • Slope-intercept y = mx + b Graphing; reading m and the y-intercept (0, b)
  • Point-slope y − y₁ = m(x − x₁) You already know one point and the slope
  • Standard Ax + By = C Integer coefficients; intercepts by setting a variable to 0

Horizontal: y = c (slope 0). Vertical: x = k (undefined slope). A vertical line is not a function of x; every other line in the table is.

Standard-form shortcuts

From Ax + By = C with B ≠ 0:

  • Slope m = −A/B
  • y-intercept = C/B, point (0, C/B)
  • x-intercept = C/A if A ≠ 0, point (C/A, 0)

Worked example. 3x + 4y = 24. Slope = −3/4. y-intercept 24/4 = 6 → (0, 6). x-intercept 24/3 = 8 → (8, 0). Slope-intercept form: y = −(3/4)x + 6.

To convert point-slope into slope-intercept, distribute and add y₁. From slope 2 through (−3, 1): y − 1 = 2(x + 3) → y − 1 = 2x + 6 → y = 2x + 7. The y-intercept is 7 , not 1. The 1 was only the known point's y-coordinate — and 1 will sit in the answer list if the question asked for b.

Finding a line from two points is a two-step habit:

Compute m from the two points.

Plug one of the points into point-slope (or into y = mx + b to solve for b).

Computing m and then stopping is how "2" becomes a trap when the stem asked for an intercept or a constant term.

Parallel and Perpendicular

Parallel non-vertical lines: m₁ = m₂ and the y-intercepts differ. They never meet. The system of their equations has no solution .

Same line (coincident): m₁ = m₂ and b₁ = b₂. Infinitely many solutions.

Perpendicular non-vertical lines: slopes are negative reciprocals . m₁ · m₂ = −1 , or m₂ = −1/m₁.

Every horizontal line is perpendicular to every vertical line. That pair is the exception to "multiply the slopes to get −1," because one slope is undefined.

Negative reciprocal means two moves: flip the fraction and change the sign.

  • Given slope Perpendicular slope
  • 2 −1/2
  • −5 1/5
  • 3/4 −4/3
  • −2/7 7/2
  • 0 (horizontal) undefined (vertical)

Worked example. Line L1 through (−3, 1) and (1, 9) has slope 2. Line L2 is perpendicular to L1 and passes through (6, 5). Then m₂ = −1/2. Point-slope: y − 5 = (−1/2)(x − 6) → y − 5 = −x/2 + 3 → y = −x/2 + 8. Set y = 0 for the x-intercept: 0 = −x/2 + 8, so x = 16 . The value 8 is the y-intercept — the usual partial-calculation trap when the question asked for the x-intercept.

Perpendicular bisector (still coordinate algebra)

The perpendicular bisector of segment AB is the line through the midpoint of AB with slope −1/m_AB . Compute M from Chapter 6.1, flip the slope, write point-slope. That is midpoint plus negative reciprocal, not a Euclidean construction.

Worked example. Segment from (0, 0) to (6, 8). Midpoint (3, 4). Slope of the segment is 8/6 = 4/3, so the perpendicular slope is −3/4. Equation: y − 4 = (−3/4)(x − 3).

Intercepts and Intercept Triangles

x-intercept: set y = 0 and solve for x. Point (x, 0).

y-intercept: set x = 0 and solve for y. Point (0, y).

A line that is not horizontal, not vertical, and not through the origin cuts the axes at two points (a, 0) and (0, b). Those two intercepts and the origin form a right triangle with legs |a| and |b|. Its area is (1/2)|a · b| . That intercept triangle is coordinate algebra: two axis-parallel legs.

Worked example. The line 2x + 5y = 20 has intercepts (10, 0) and (0, 4). The triangle with the origin has area (1/2)(10)(4) = 20 .

A second official-style setup is a triangle bounded by two lines and an axis .

Worked example. Region bounded by y = 2x, y = −(1/2)x + 5, and the y-axis x = 0.

y = 2x meets x = 0 at (0, 0).

y = −(1/2)x + 5 meets x = 0 at (0, 5).

The two slanted lines: 2x = −x/2 + 5 → (5/2)x = 5 → x = 2, y = 4. Third vertex (2, 4).

Base along the y-axis has length 5. Height is the horizontal distance from (2, 4) to x = 0, which is 2. Area = (1/2)(5)(2) = 5 . Forgetting the 1/2 produces 10; using the slanted segment as a "base" without an altitude from coordinates is how Euclidean instincts waste time on an algebra item.

Which quadrants does y = mx + b hit?

Any non-horizontal, non-vertical line that misses the origin passes through exactly three quadrants and misses one.

  • m b x-intercept −b/m Quadrants hit Quadrant missed
  • + + negative I, II, III IV
  • + − positive I, III, IV II
  • − + positive I, II, IV III
  • − − negative II, III, IV I
  • + 0 origin I and III only II and IV
  • − 0 origin II and IV only I and III
  • 0 + none I and II III and IV
  • 0 − none III and IV I and II

Memory: positive slope and positive y-intercept starts on the positive y-axis (between I and II) and rises to the right into I, so the missed quadrant is the bottom-right, IV . Negative slope from a positive y-intercept falls to the right into IV and never reaches III.

Worked example. kx + 3y = 12. Slope-intercept: y = (−k/3)x + 4. Here b = 4 > 0. The line hits I, II, and IV but not III precisely when the slope is negative: −k/3 < 0 → k > 0 . If k < 0 the slope is positive and the line does enter III. If k = 0 the line is the horizontal y = 4 and stays in I and II only.

Intersections

Two lines with different slopes meet in exactly one point: solve the system. Equal slopes and different intercepts: no intersection (parallel). Equal slopes and equal intercepts: the same line.

Substitution is usually faster than elimination on Quant because one equation is often already solved for y. Set mx + b equal to the other expression, solve for x, then back-substitute for y. The solution pair is the intersection point on the plane — the same (x, y) you would plot.

Worked example. y = 3x − 1 and y = −x + 7. Then 3x − 1 = −x + 7 → 4x = 8 → x = 2, y = 5. Intersection (2, 5) . Different slopes (3 and −1) guaranteed a unique meeting point; 3 · (−1) = −3, not −1, so the lines are not perpendicular.

Loading diagram... From a Line Equation to Parallel, Perpendicular, or Intersection