Study guide

3.4 Percentages, Percent Change, Markup & Profit

GMAT Quantitative Reasoning Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Adaptive Scoring & Problem Solving Fundamentals

1.1 GMAT Focus Quant Overview & Question Mechanics 1.2 Mental Math, Estimation & Non-Calculator Strategies 1.3 Problem Solving Strategies & Elimination Techniques

2 Chapter 2: Number Theory & Integer Properties

2.1 Divisibility Rules, Prime Factorization & Factors 2.2 Greatest Common Factor (GCF) & Least Common Multiple (LCM) 2.3 Division Algorithm & Remainder Arithmetic 2.4 Parity, Signs & Consecutive Integer Properties 2.5 Real Numbers, the Number Line & Properties of Operations

3 Chapter 3: Fractions, Decimals, Ratios & Percentages

3.1 Fraction Arithmetic & Operations 3.2 Decimals, Place Value & Terminating Decimals 3.3 Ratios, Proportions & Variation 3.4 Percentages, Percent Change, Markup & Profit

4 Chapter 4: Exponents, Roots & Radical Expressions

4.1 Laws of Exponents & Exponential Equations 4.2 Radicals & Operations with Roots 4.3 Exponent & Root Inequalities and Traps

5 Chapter 5: Algebraic Expressions, Equations & Inequalities

5.1 Algebraic Manipulation & Special Products 5.2 Linear Equations & Systems of Equations 5.3 Quadratic Equations, Roots & Factoring 5.4 Inequalities, Sign Charts & Absolute Value 5.5 Formulas, Units & Measurement Conversion

6 Chapter 6: Coordinate Geometry & Linear Functions

6.1 The Coordinate Plane, Distance & Midpoint 6.2 Slope, Equations of Lines & Intercepts 6.3 Functions, Notation & Transformations

7 Chapter 7: Rates, Work, Motion & Mixture Word Problems

7.1 Uniform Motion: Rate, Time & Distance 7.2 Relative Speed, Catch-Up & Current/Wind Problems 7.3 Work-Rate & Cooperative Labor 7.4 Mixture & Weighted Average Word Problems

8 Chapter 8: Applied Word Problems, Sets & Sequences

8.1 Overlapping Sets & Venn Diagrams 8.2 Arithmetic & Geometric Sequences 8.3 Simple & Compound Interest Calculations 8.4 Age Problems & Discrete Optimization

9 Chapter 9: Descriptive Statistics & Data Distributions

9.1 Mean, Median & Mode 9.2 Range, Variance & Standard Deviation 9.3 Frequency Distributions & Distribution Properties

10 Chapter 10: Permutations, Combinations & Probability

10.1 Fundamental Counting Principle & Factorials 10.2 Combinations, Permutations & Grouping 10.3 Probability Rules: Independent & Dependent Events 10.4 Complementary Probability & Multi-Stage Events

3.4 Percentages, Percent Change, Markup & Profit

Key Takeaways Explain This Topic AI

A P% change uses the multiplier (1 + P/100) for an increase and (1 - P/100) for a decrease; apply it to the original base.

Percent change is always (New - Old) / Old; a 25% increase the other way is a 20% decrease, not 25%.

Percent of a percent is a product: 20% of 30% = 6%, never 50%. Chain 'is a percent of' statements by multiplying decimals.

Successive percent changes multiply: (1.20)(0.80) = 0.96, which is a 4% net decrease, not a wash.

Markup is profit over cost; margin is profit over selling price (revenue); discount is taken from the marked price, not from cost.

Last updated: August 2026

Quick Answer: P % = P 100 P\% = \frac{P}{100} P % = 100 P ​ . The no-calculator engine is the decimal (or fractional) multiplier: new = original × ( 1 ± P / 100 ) \times (1 \pm P/100) × ( 1 ± P /100 ) . Percent of a percent multiplies; successive changes multiply; percent change always divides by the old value. Markup lives on cost, margin lives on revenue, and discount lives on the marked price. Official Guide review groups percents with rates and ratios because every one of these is a proportion.

Percent as a Multiplier

Rather than computing a percentage amount and then adding or subtracting it, multiply the base by one factor: New value = Original value × Multiplier . \text{New value} = \text{Original value} \times \text{Multiplier}. New value = Original value × Multiplier .

  • Change Decimal multiplier Fractional multiplier On a 120 120 120 base
  • + 10 % +10\% + 10% 1.10 1.10 1.10 11 10 \frac{11}{10} 10 11 ​ 132 132 132
  • + 20 % +20\% + 20% 1.20 1.20 1.20 6 5 \frac{6}{5} 5 6 ​ 144 144 144
  • + 25 % +25\% + 25% 1.25 1.25 1.25 5 4 \frac{5}{4} 4 5 ​ 150 150 150
  • + 50 % +50\% + 50% 1.50 1.50 1.50 3 2 \frac{3}{2} 2 3 ​ 180 180 180
  • − 10 % -10\% − 10% 0.90 0.90 0.90 9 10 \frac{9}{10} 10 9 ​ 108 108 108
  • − 20 % -20\% − 20% 0.80 0.80 0.80 4 5 \frac{4}{5} 5 4 ​ 96 96 96
  • − 25 % -25\% − 25% 0.75 0.75 0.75 3 4 \frac{3}{4} 4 3 ​ 90 90 90
  • − 50 % -50\% − 50% 0.50 0.50 0.50 1 2 \frac{1}{2} 2 1 ​ 60 60 60

Fractions beat decimals on the GMAT whenever the percent is a friendly unit fraction ( 25 % = 1 4 25\% = \frac{1}{4} 25% = 4 1 ​ , 12.5 % = 1 8 12.5\% = \frac{1}{8} 12.5% = 8 1 ​ , 33 1 3 % = 1 3 33\frac{1}{3}\% = \frac{1}{3} 33 3 1 ​ % = 3 1 ​ ).

Percent of a Percent

' 20 % 20\% 20% of 30 % 30\% 30% ' is a product of fractions , not a sum: 20 % of 30 % = 20 100 × 30 100 = 0.06 = 6 % . 20\% \text{ of } 30\% = \frac{20}{100} \times \frac{30}{100} = 0.06 = 6\%. 20% of 30% = 100 20 ​ × 100 30 ​ = 0.06 = 6%.

It is not 50 % 50\% 50% . If a bonus is 20 % 20\% 20% of a commission that is itself 30 % 30\% 30% of revenue, the bonus is 6 % 6\% 6% of revenue.

Chaining 'is a percent of' works the same way. If X X X is 25 % 25\% 25% of Y Y Y and Y Y Y is 40 % 40\% 40% of Z Z Z , then X = 0.25 × 0.40 × Z = 0.10 Z , X = 0.25 \times 0.40 \times Z = 0.10 Z, X = 0.25 × 0.40 × Z = 0.10 Z ,

so X X X is 10 % 10\% 10% of Z Z Z . Multiply the decimal forms; do not add 25 25 25 and 40 40 40 .

Worked example. What is 40 % 40\% 40% of 25 % 25\% 25% of 800 800 800 ? Compute 0.40 × 0.25 × 800 = 0.10 × 800 = 80 0.40 \times 0.25 \times 800 = 0.10 \times 800 = 80 0.40 × 0.25 × 800 = 0.10 × 800 = 80 . Equivalently, 25 % 25\% 25% of 800 800 800 is 200 200 200 , and 40 % 40\% 40% of 200 200 200 is 80 80 80 . Taking ' 40 % 40\% 40% of 25 % 25\% 25% ' as 65 % 65\% 65% of 800 800 800 produces 520 520 520 and is the standard wrong answer.

Percent of a percent is also how overlapping discounts differ from a single combined discount: a 10 % 10\% 10% coupon applied to a price that is already 20 % 20\% 20% off is 0.90 × 0.80 = 0.72 0.90 \times 0.80 = 0.72 0.90 × 0.80 = 0.72 of original, which is a 28 % 28\% 28% total discount, not 30 % 30\% 30% . The extra 2 % 2\% 2% is exactly the 10 % 10\% 10% of the 20 % 20\% 20% that stacking would double-count if you added.

Percent Change and the Asymmetric Base Percent change = New − Old Old × 100 % = Change Original base × 100 % . \text{Percent change} = \frac{\text{New} - \text{Old}}{\text{Old}} \times 100\% = \frac{\text{Change}}{\text{Original base}} \times 100\%. Percent change = Old New − Old ​ × 100% = Original base Change ​ × 100%.

The denominator is always the starting value of the quantity whose change you are reporting. Switching the base is the most common GMAT percent error.

Trap. If A A A is 25 % 25\% 25% greater than B B B , by what percent is B B B less than A A A ? Not 25 % 25\% 25% . A = 1.25 B = 5 4 B ⟹ B = 4 5 A = 0.80 A , A = 1.25 B = \frac{5}{4} B \implies B = \frac{4}{5} A = 0.80 A, A = 1.25 B = 4 5 ​ B ⟹ B = 5 4 ​ A = 0.80 A ,

so B B B is 20 % 20\% 20% less than A A A . In general, if A A A is x % x\% x % greater than B B B , then B B B is smaller than A A A by x 100 + x × 100 % \frac{x}{100 + x} \times 100\% 100 + x x ​ × 100% . For x = 25 x = 25 x = 25 , that is 25 125 = 20 % \frac{25}{125} = 20\% 125 25 ​ = 20% . For x = 50 x = 50 x = 50 , B B B is 50 150 = 33 1 3 % \frac{50}{150} = 33\frac{1}{3}\% 150 50 ​ = 33 3 1 ​ % less than A A A . The two percentages are reciprocals of the two multipliers, not copies of each other.

Going down and then asking about going up is the mirror: if B B B is 20 % 20\% 20% less than A A A , then A A A is 25 % 25\% 25% greater than B B B , because 0.20 0.80 = 0.25 \frac{0.20}{0.80} = 0.25 0.80 0.20 ​ = 0.25 .

Successive Percent Changes

When a value undergoes consecutive percentage changes, the overall multiplier is the product of the individual multipliers: Final = Initial × M 1 × M 2 × ⋯ × M k . \text{Final} = \text{Initial} \times M_1 \times M_2 \times \cdots \times M_k. Final = Initial × M 1 ​ × M 2 ​ × ⋯ × M k ​ .

Addition of the percents is legal only for successive changes that are each computed on the same original base (rare in word problems). Compound changes use a new base at every step, so they multiply.

A + 20 % +20\% + 20% move followed by a − 20 % -20\% − 20% move is ( 1.20 ) ( 0.80 ) = 0.96 , (1.20)(0.80) = 0.96, ( 1.20 ) ( 0.80 ) = 0.96 ,

which is a 4 % 4\% 4% net decrease , not a wash. In general, ( 1 + P 100 ) ( 1 − P 100 ) = 1 − ( P 100 ) 2 , \left(1 + \frac{P}{100}\right)\left(1 - \frac{P}{100}\right) = 1 - \left(\frac{P}{100}\right)^2, ( 1 + 100 P ​ ) ( 1 − 100 P ​ ) = 1 − ( 100 P ​ ) 2 ,

so an up-and-down of P % P\% P % always nets a decrease of ( P 10 ) 2 \left(\frac{P}{10}\right)^2 ( 10 P ​ ) 2 percent: 10 % 10\% 10% each way nets 1 % 1\% 1% down; 20 % 20\% 20% each way nets 4 % 4\% 4% down; 50 % 50\% 50% each way nets 25 % 25\% 25% down.

Because multiplication commutes, order does not matter for a sequence of ordinary percent changes on one quantity: + 30 % +30\% + 30% then − 10 % -10\% − 10% is 1.30 × 0.90 = 1.17 1.30 \times 0.90 = 1.17 1.30 × 0.90 = 1.17 , and − 10 % -10\% − 10% then + 30 % +30\% + 30% is the same 1.17 1.17 1.17 ( + 17 % +17\% + 17% net). Order would matter only if a later step depended on a threshold or a different base (tax vs discount vs tip on different amounts).

Loading diagram... Successive percent multipliers: +20% then -20%

Reverse Percents and Discounts

To recover the original value before a percentage change, divide by the multiplier: Original = Final Multiplier . \text{Original} = \frac{\text{Final}}{\text{Multiplier}}. Original = Multiplier Final ​ .

Worked example. An item sold for $ 360 \text{\textdollar}360 $ 360 after a 20 % 20\% 20% discount. What was the original (marked) price?

Wrong: $ 360 + 0.20 × 360 = $ 432 \text{\textdollar}360 + 0.20 \times 360 = \text{\textdollar}432 $ 360 + 0.20 × 360 = $ 432 applies 20 % 20\% 20% to the sale price, which is the wrong base.

Correct: original = 360 0.80 = 360 × 5 4 = $ 450 = \frac{360}{0.80} = 360 \times \frac{5}{4} = \text{\textdollar}450 = 0.80 360 ​ = 360 × 4 5 ​ = $ 450 .

A discount of P % P\% P % is a multiplier of 1 − P / 100 1 - P/100 1 − P /100 on the marked price , not on cost. Two successive discounts of 10 % 10\% 10% and 20 % 20\% 20% are 0.90 × 0.80 = 0.72 0.90 \times 0.80 = 0.72 0.90 × 0.80 = 0.72 of marked, a 28 % 28\% 28% single-equivalent discount. They are not a 30 % 30\% 30% discount.

Profit, Cost, Revenue, Markup, and Margin

GMAT commercial word problems use three dollar amounts and two different percentages of profit.

  • Quantity Meaning Formula
  • Cost C C C What the seller paid given or back-solved
  • Selling price / revenue S S S What the buyer paid S = C + profit S = C + \text{profit} S = C + profit
  • Profit Surplus of revenue over cost S − C S - C S − C (negative profit is a loss)
  • Markup % Profit as a percent of cost S − C C × 100 % \frac{S - C}{C} \times 100\% C S − C ​ × 100%
  • Margin % Profit as a percent of selling price S − C S × 100 % \frac{S - C}{S} \times 100\% S S − C ​ × 100%
  • Discount % Reduction from marked price M M M M − S M × 100 % \frac{M - S}{M} \times 100\% M M − S ​ × 100%

Markup and margin are not interchangeable. If cost is $ 80 \text{\textdollar}80 $ 80 and selling price is $ 100 \text{\textdollar}100 $ 100 , profit is $ 20 \text{\textdollar}20 $ 20 :

  • markup on cost = 20 80 = 25 % = \frac{20}{80} = 25\% = 80 20 ​ = 25%
  • margin on revenue = 20 100 = 20 % = \frac{20}{100} = 20\% = 100 20 ​ = 20%

The relationship is the same asymmetric-base identity as before: a 25 % 25\% 25% markup is a 20 % 20\% 20% margin, because S = 1.25 C S = 1.25 C S = 1.25 C implies C = 0.80 S C = 0.80 S C = 0.80 S . If a problem says 'marked up 40 % 40\% 40% ' it means S marked = 1.40 C S_{\text{marked}} = 1.40 C S marked ​ = 1.40 C . If it then says 'discounted 25 % 25\% 25% ', the sale price is 1.40 C × 0.75 = 1.05 C 1.40 C \times 0.75 = 1.05 C 1.40 C × 0.75 = 1.05 C . Sold at $ 252 \text{\textdollar}252 $ 252 , cost is 252 1.05 = $ 240 \frac{252}{1.05} = \text{\textdollar}240 1.05 252 ​ = $ 240 and profit is $ 12 \text{\textdollar}12 $ 12 . That two-step (markup multiplier, then discount multiplier) is the standard profit item.

Revenue itself is S × Q S \times Q S × Q when quantity also changes. A 25 % 25\% 25% price increase with a 20 % 20\% 20% drop in units sold produces revenue multiplier 1.25 × 0.80 = 1.00 1.25 \times 0.80 = 1.00 1.25 × 0.80 = 1.00 — unchanged revenue. A 20 % 20\% 20% price increase with a 20 % 20\% 20% drop in units produces 1.20 × 0.80 = 0.96 1.20 \times 0.80 = 0.96 1.20 × 0.80 = 0.96 , a 4 % 4\% 4% revenue decrease. Translate every percent into a multiplier, multiply the multipliers, then read the net percent off the product. That is the entire commercial-math toolkit the Quantitative Reasoning section uses.