Study guide

2.5 Real Numbers, the Number Line & Properties of Operations

GMAT Quantitative Reasoning Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Adaptive Scoring & Problem Solving Fundamentals

1.1 GMAT Focus Quant Overview & Question Mechanics 1.2 Mental Math, Estimation & Non-Calculator Strategies 1.3 Problem Solving Strategies & Elimination Techniques

2 Chapter 2: Number Theory & Integer Properties

2.1 Divisibility Rules, Prime Factorization & Factors 2.2 Greatest Common Factor (GCF) & Least Common Multiple (LCM) 2.3 Division Algorithm & Remainder Arithmetic 2.4 Parity, Signs & Consecutive Integer Properties 2.5 Real Numbers, the Number Line & Properties of Operations

3 Chapter 3: Fractions, Decimals, Ratios & Percentages

3.1 Fraction Arithmetic & Operations 3.2 Decimals, Place Value & Terminating Decimals 3.3 Ratios, Proportions & Variation 3.4 Percentages, Percent Change, Markup & Profit

4 Chapter 4: Exponents, Roots & Radical Expressions

4.1 Laws of Exponents & Exponential Equations 4.2 Radicals & Operations with Roots 4.3 Exponent & Root Inequalities and Traps

5 Chapter 5: Algebraic Expressions, Equations & Inequalities

5.1 Algebraic Manipulation & Special Products 5.2 Linear Equations & Systems of Equations 5.3 Quadratic Equations, Roots & Factoring 5.4 Inequalities, Sign Charts & Absolute Value 5.5 Formulas, Units & Measurement Conversion

6 Chapter 6: Coordinate Geometry & Linear Functions

6.1 The Coordinate Plane, Distance & Midpoint 6.2 Slope, Equations of Lines & Intercepts 6.3 Functions, Notation & Transformations

7 Chapter 7: Rates, Work, Motion & Mixture Word Problems

7.1 Uniform Motion: Rate, Time & Distance 7.2 Relative Speed, Catch-Up & Current/Wind Problems 7.3 Work-Rate & Cooperative Labor 7.4 Mixture & Weighted Average Word Problems

8 Chapter 8: Applied Word Problems, Sets & Sequences

8.1 Overlapping Sets & Venn Diagrams 8.2 Arithmetic & Geometric Sequences 8.3 Simple & Compound Interest Calculations 8.4 Age Problems & Discrete Optimization

9 Chapter 9: Descriptive Statistics & Data Distributions

9.1 Mean, Median & Mode 9.2 Range, Variance & Standard Deviation 9.3 Frequency Distributions & Distribution Properties

10 Chapter 10: Permutations, Combinations & Probability

10.1 Fundamental Counting Principle & Factorials 10.2 Combinations, Permutations & Grouping 10.3 Probability Rules: Independent & Dependent Events 10.4 Complementary Probability & Multi-Stage Events

2.5 Real Numbers, the Number Line & Properties of Operations

Key Takeaways Explain This Topic AI

Every point on the number line is a real number: integers, rationals (any ratio of integers, including every terminating or repeating decimal), and irrationals such as sqrt(2) and pi.

"Number" never means "integer" on the GMAT. If a stem says x is a number, test 1/2 and -0.4, not only 1, 2, and 3.

"Between 1 and 4" is 1 < x < 4; "between 1 and 4, inclusive" is 1 <= x <= 4, and the count of integers from a to b inclusive is b - a + 1.

|x| is the distance from x to 0, so |x| is never negative and -x is positive whenever x is negative.

The distributive property read right to left is factoring: 37 x 98 + 37 x 2 = 37(98 + 2) = 3,700 replaces two multiplications with one.

Last updated: August 2026

Where the Number Line Sits on the Official Outline

Official Guide Quantitative Review 2026–2027 Math Review 3.1 opens with Numbers and the Number Line and closes with Properties of Operations . Those two sub-topics bracket everything else in this chapter. Divisibility, GCF and LCM, remainders, and parity all assume you can place a number on the line, order it against another number, and rearrange an expression without changing its value. On a 21-question, 45-minute, no-calculator section, that rearranging is where the time is won.

The real-number map

Every point on the number line is a real number , and every real number is a point on the number line. GMAT stems name the sub-categories directly, so keep them straight.

Set Contains Examples Watch for

Integers the whole numbers and their negatives −7, 0, 12 0 is an integer, and "integer" never implies "positive"

Rational any ratio of two integers with a nonzero denominator 3/4, −5, 0.25, 0.333... every terminating or repeating decimal is rational

Irrational reals that are not a ratio of integers sqrt(2), sqrt(3), pi non-terminating and non-repeating decimals

Real all of the above everything on the line GMAT Quant stays inside the real numbers

Two traps GMAC uses constantly. First, "number" does not mean "integer." If a stem says x is a number and you only substitute 1, 2, and 3, you will miss the case that breaks the pattern, which is usually a proper fraction such as 1/2 or a negative such as −0.4. Second, "positive" does not mean "integer" either. In n is a positive integer , both words are load-bearing, and dropping either one is how a must-be-true item gets answered wrong.

Order, betweenness, and inclusivity

On the number line each number is less than every number to its right . That single sentence settles most sign comparisons: −9 < −2 because −9 sits farther left, even though 9 > 2.

The official wording matters for counting.

"x is between 1 and 4" means 1 < x < 4. The endpoints are excluded.

"x is between 1 and 4, inclusive " means 1 ≤ x ≤ 4. The endpoints count.

The same trap runs through integer counts. The number of integers from a to b inclusive is b − a + 1 , not b − a. From 1 to 4 inclusive that is four integers, not three. Chapter 8 reuses this exact count for evenly spaced sets, so build the habit here.

Absolute value is distance, not "drop the sign"

|x| is the distance from x to 0 on the number line: |x| = x when x ≥ 0, and |x| = −x when x < 0. Because it is a distance, |x| is never negative, and |−3| = |3| = 3.

Reading absolute value as distance is what makes |x − 5| = 2 immediate: x is two units from 5, so x = 3 or x = 7. Chapter 5 builds the full inequality machinery on this definition; here it is enough to see it as a length.

One sign note that decides must-be-true items: −x is not automatically negative. If x = −6, then −x = 6. The minus sign reverses whatever sign x already had.

Properties of Operations: Your Licence to Rearrange

The official Math Review lists the algebra of ordinary arithmetic as tested content. You will never be asked to name a property on Problem Solving, but every fast solution uses one.

  • Property Statement What it buys you on Quant
  • Commutative x + y = y + x and xy = yx reorder terms to pair friendly numbers
  • Associative (x + y) + z = x + (y + z) and (xy)z = x(yz) regroup to build a 10 or a 100
  • Distributive x(y + z) = xy + xz pull a common factor out of an ugly sum
  • Additive identity x + 0 = x adding zero changes nothing
  • Multiplicative identity x × 1 = x multiply by a disguised 1, such as 5/5, to rewrite a fraction
  • Additive inverse x + (−x) = 0 cancel matched terms on sight
  • Zero product if xy = 0 then x = 0 or y = 0, or both the entire reason factoring solves equations
  • Division by zero is undefined

x/0 has no value for any x, including x = 0. A denominator that could be zero is therefore a hidden restriction rather than a nuisance. Given (x² − 9)/(x − 3), the condition x ≠ 3 exists before you cancel anything, and GMAC writes answer choices for testers who cancel first and check later.

  • Sign rules, stated once
  • positive + positive = positive; negative + negative = negative
  • positive × positive = positive; negative × negative = positive; positive × negative = negative
  • x − y = −(y − x), so flipping a subtraction flips the sign of the result
  • if xy = 0 then at least one factor is 0; if xy > 0 the factors share a sign; if xy < 0 they do not
  • Order of operations

Parentheses first, then exponents, then multiplication and division left to right, then addition and subtraction left to right. The one that actually costs points is the minus sign in front of a power: −3² = −9, but (−3)² = 9. The exponent binds to the 3 alone unless parentheses capture the sign. Chapter 4 returns to this with negative bases.

Distribution as a No-Calculator Weapon

Read right to left, the distributive property is factoring, and factoring is how you avoid long multiplication on a section with no calculator.

Worked example. 37 × 98 + 37 × 2. Do not compute either product. Factor the shared 37: 37(98 + 2) = 37 × 100 = 3,700 .

Worked example. 63 × 101. Split the awkward factor: 63(100 + 1) = 6,300 + 63 = 6,363 .

Worked example. 48 × 25. Rewrite 25 as 100/4, which is associativity plus a disguised 1: 48 × 100 / 4 = 4,800 / 4 = 1,200 .

Worked example. (873 × 46) − (873 × 45). The stem shows two four-digit multiplications; the distributive property turns it into one subtraction: 873(46 − 45) = 873 × 1 = 873 .

Worked example. 19 × 21 + 19 × 79. Factor: 19(21 + 79) = 19 × 100 = 1,900 .

The habit to carry into every later chapter: before you compute, look for a shared factor. A stem that displays large products almost never wants you to evaluate them.

Loading diagram... Reading a Number Stem Before You Substitute