Study guide
7.4 Mixture & Weighted Average Word Problems
GMAT Quantitative Reasoning Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Adaptive Scoring & Problem Solving Fundamentals
1.1 GMAT Focus Quant Overview & Question Mechanics 1.2 Mental Math, Estimation & Non-Calculator Strategies 1.3 Problem Solving Strategies & Elimination Techniques
2 Chapter 2: Number Theory & Integer Properties
2.1 Divisibility Rules, Prime Factorization & Factors 2.2 Greatest Common Factor (GCF) & Least Common Multiple (LCM) 2.3 Division Algorithm & Remainder Arithmetic 2.4 Parity, Signs & Consecutive Integer Properties 2.5 Real Numbers, the Number Line & Properties of Operations
3 Chapter 3: Fractions, Decimals, Ratios & Percentages
3.1 Fraction Arithmetic & Operations 3.2 Decimals, Place Value & Terminating Decimals 3.3 Ratios, Proportions & Variation 3.4 Percentages, Percent Change, Markup & Profit
4 Chapter 4: Exponents, Roots & Radical Expressions
4.1 Laws of Exponents & Exponential Equations 4.2 Radicals & Operations with Roots 4.3 Exponent & Root Inequalities and Traps
5 Chapter 5: Algebraic Expressions, Equations & Inequalities
5.1 Algebraic Manipulation & Special Products 5.2 Linear Equations & Systems of Equations 5.3 Quadratic Equations, Roots & Factoring 5.4 Inequalities, Sign Charts & Absolute Value 5.5 Formulas, Units & Measurement Conversion
6 Chapter 6: Coordinate Geometry & Linear Functions
6.1 The Coordinate Plane, Distance & Midpoint 6.2 Slope, Equations of Lines & Intercepts 6.3 Functions, Notation & Transformations
7 Chapter 7: Rates, Work, Motion & Mixture Word Problems
7.1 Uniform Motion: Rate, Time & Distance 7.2 Relative Speed, Catch-Up & Current/Wind Problems 7.3 Work-Rate & Cooperative Labor 7.4 Mixture & Weighted Average Word Problems
8 Chapter 8: Applied Word Problems, Sets & Sequences
8.1 Overlapping Sets & Venn Diagrams 8.2 Arithmetic & Geometric Sequences 8.3 Simple & Compound Interest Calculations 8.4 Age Problems & Discrete Optimization
9 Chapter 9: Descriptive Statistics & Data Distributions
9.1 Mean, Median & Mode 9.2 Range, Variance & Standard Deviation 9.3 Frequency Distributions & Distribution Properties
10 Chapter 10: Permutations, Combinations & Probability
10.1 Fundamental Counting Principle & Factorials 10.2 Combinations, Permutations & Grouping 10.3 Probability Rules: Independent & Dependent Events 10.4 Complementary Probability & Multi-Stage Events
7.4 Mixture & Weighted Average Word Problems
Key Takeaways Explain This Topic AI
Concentration is (solute) / (total mixture). Mixing two solutions conserves solute: C₁V₁ + C₂V₂ = C_mix(V₁ + V₂), so C_mix is the volume-weighted average of C₁ and C₂.
Alligation (the seesaw) gives the volume ratio directly: V₁ : V₂ = |C₂ − C_mix| : |C₁ − C_mix|. The cheaper or weaker component takes the larger share when the target sits closer to it.
Pure water is 0% solute; pure solute is 100%. Dilution adds 0% and holds solute fixed while volume grows. Fortification adds 100%. Evaporation removes 0% (water) and holds solute fixed while volume shrinks.
A mixture concentration always lies strictly between the two input concentrations. Any choice outside that interval is impossible.
Repeatedly removing x units from a container of volume V and replacing with water multiplies remaining solute by (1 − x/V) each cycle: Q_n = Q₀(1 − x/V)^n.
Last updated: August 2026
Concentration and Conserved Solute
Mixture word problems sit at the overlap of OG Math Review 3.3 (rates, ratios, percents) and 3.4 (statistics: weighted averages). A solution is solute plus solvent. Concentration is the ratio
C = (amount of solute) / (total volume) , often written as a percent.
Solute amount is then C × V. When two solutions mix and nothing reacts or evaporates, solute is conserved :
- C₁V₁ + C₂V₂ = C_mix (V₁ + V₂)
- so the mixture concentration is the volume-weighted average
C_mix = (C₁V₁ + C₂V₂) / (V₁ + V₂) .
C_mix always lies strictly between C₁ and C₂. If you mix 10% acid with 40% acid, the result cannot be 5% or 45%. Cross those choices off before you algebra. The same bound is the average-speed lesson in different clothes: a weighted average cannot fall outside the data.
Worked example. Mix 20 liters of 10% acid with 30 liters of 40% acid. Solute: 0.10×20 + 0.40×30 = 2 + 12 = 14 liters of acid. Total volume 50 liters. C_mix = 14/50 = 0.28 = 28% . Check: 28 sits between 10 and 40, closer to 40 because more of the 40% solution was used.
Units: keep C as a decimal (0.20) or as a percent (20) consistently. Mixing 20 with 0.50 in the same equation is a scaling error of 100. On a no-calculator exam, clearing percents by using 20 and 50 (and 30 as the target) is often cleaner than introducing 0.20.
Alloys are the same model with metals as solute. A 12-gram alloy that is 40% copper contains 4.8 grams of copper. Mixing alloys conserves each metal separately; write one conservation equation per metal you care about.
Alligation, the Seesaw Ratio
When the question asks how much of each solution to hit a target concentration, alligation (the seesaw, or allegation) avoids solving for x in a linear equation — though the equation is still the justification.
From C₁V₁ + C₂V₂ = C_mix(V₁ + V₂), rearrange:
V₁ / V₂ = |C₂ − C_mix| / |C₁ − C_mix| .
The volume of each component is proportional to the gap from the other component to the target . Graphically, write C₁ and C₂ on the left, C_mix in the middle, and subtract diagonally:
- Parts of the C₁ solution = |C₂ − C_mix|
- Parts of the C₂ solution = |C₁ − C_mix|
Worked example. Make 60 liters of 30% acid from a 20% solution and a 50% solution. Diagonal gaps: |50 − 30| = 20 parts of 20%, and |20 − 30| = 10 parts of 50%. Ratio 20 : 10 = 2 : 1. Total 3 parts = 60 liters, so 1 part = 20 liters. Use 40 liters of 20% and 20 liters of 50%. Conservation check: 0.20×40 + 0.50×20 = 8 + 10 = 18, and 18/60 = 0.30.
The weaker solution takes more volume when the target is closer to the weaker concentration — 30 is closer to 20 than to 50, so the 2 : 1 ratio favors the 20% stock. That is the same "closer to the slower speed" intuition from the harmonic mean, now in concentration units.
Alligation also handles mixing a solution with water (C₂ = 0) or with pure solute (C₂ = 100). You do not need a separate theory; 0 and 100 are legal concentrations on the seesaw.
Dilution, Fortification, and Evaporation
- Process What you add or remove Solute of that stream What stays fixed
- Dilution add water 0% solute amount; volume rises
- Fortification add pure solute 100% — both solute and volume rise
- Evaporation remove water 0% (water leaves) solute amount; volume falls
Dilution. C₁V₁ + 0 = C_final(V₁ + w). The same solute sits in a larger tank, so concentration falls. Worked example: 40 ounces of 15% alcohol contains 6 ounces of alcohol. Adding w ounces of water to reach 10%: 6 / (40 + w) = 0.10, so 6 = 4 + 0.10w and w = 20 ounces . Check: 6/60 = 10%.
Fortification. C₁V₁ + 1·x = C_final(V₁ + x). Worked example: 40 liters of 10% salt, add x liters of pure salt to reach 20%. Then (4 + x)/(40 + x) = 1/5, so 5(4 + x) = 40 + x, 20 + 5x = 40 + x, 4x = 20, x = 5 liters . Alligation: 10% and 100% around a 20% target. Gaps: |100 − 20| = 80 parts of 10%, |10 − 20| = 10 parts of 100%, ratio 8 : 1. With 40 liters of 10%, pure salt is 40/8 = 5 liters.
Evaporation. Water leaves; solute stays. C₁V_initial = C_final V_final, so V_final = (C₁ / C_final) × V_initial, and water boiled off is V_initial − V_final. Worked example: 40 ounces at 15% alcohol, evaporate to 25%. Solute still 6 ounces, so 6 = 0.25 V_final and V_final = 24 ounces. Water removed: 40 − 24 = 16 ounces . Evaporation raises concentration; dilution lowers it. If a choice moves the wrong way, it is impossible.
A replacement that removes mixture (not pure water) and then adds water is not evaporation. That process removes some solute. Use the next formula.
Repeated Removal and Replacement
A container of volume V holds Q₀ of solute (often it starts full of pure solute, so Q₀ = V). You remove x units of well-mixed liquid and replace those x units with pure water, n times.
Each cycle leaves the fraction (1 − x/V) of whatever solute was present:
Q_n = Q₀ (1 − x/V)^n
and C_n = C₀ (1 − x/V)^n because the volume returns to V after every replacement.
Worked example. A 60-liter tank of pure alcohol. Remove 12 liters, replace with water, three times. Multiplier per cycle: 1 − 12/60 = 4/5. After three cycles: 60 × (4/5)³ = 60 × 64/125 = 30.72 liters of alcohol. Cycle-by-cycle: 48, then 38.4, then 30.72. Stopping after two cycles and reading 38.4 is the usual partial-count trap.
Expand small n with fractions rather than decimals when the exam's choices are exact. (3/4)² = 9/16 is safer than 0.75² if you are already carrying 80 liters: 80 × 9/16 = 45 exactly.
Do not treat repeated replacement as n times a linear subtraction of x units of pure solute. After cycle 1 the liquid you remove is already diluted, so each later removal takes less solute than the one before. That is why the factor is a product of (1 − x/V), not a sum.
Setup sheet
- Goal Equation
- Mix two solutions C₁V₁ + C₂V₂ = C_mix(V₁ + V₂)
- Volume ratio to a target V₁ : V₂ = |C₂ − C_mix| : |C₁ − C_mix|
- Dilute with water C₁V₁ = C_final(V₁ + w)
- Fortify with pure solute C₁V₁ + x = C_final(V₁ + x)
- Evaporate water C₁V_initial = C_final V_final
- Replace x units, n times Q_n = Q₀(1 − x/V)^n