Study guide

7.2 Relations, Functions, Equations & Inequalities

GRE General Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the GRE General Test 1.2 Test Format & Structure (Shortened Post-September 2023 Format) 1.3 Scoring System, Score Scales & Percentiles 1.4 Registration, Fees, Retake Policy & ScoreSelect

2 Analytical Writing Measure

2.1 Analytical Writing Overview & 'Analyze an Issue' Task 2.2 Issue Essay: Thesis, Structure & Evidence 2.3 Issue Essay: Timing, Planning & Drafting Process 2.4 Analytical Writing Scoring Rubric (0–6) & e-rater 2.5 Common Pitfalls & Template Traps to Avoid

3 Verbal: Reading Comprehension

3.1 Reading Comprehension Overview & Passage Types 3.2 RC Multiple-Choice — Select One Answer 3.3 RC Multiple-Choice — Select One or More 3.4 RC Select-in-Passage 3.5 RC Active Reading & Main Idea 3.6 RC Inference, Assumptions & Author's Perspective 3.7 RC Pacing & Unfamiliar Passages

4 Verbal: Text Completion

4.1 Text Completion Question Structure & Blanks 4.2 TC Single-Blank Strategy 4.3 TC Multi-Blank Strategy & Signal Words 4.4 TC Vocabulary Traps & Common GRE Words

5 Verbal: SE, Vocab & Pacing

5.1 Sentence Equivalence Question Structure 5.2 SE Strategy: Predict & Match 5.3 SE Traps: Synonyms That Don't Fit 5.4 High-Frequency GRE Vocabulary 5.5 Vocabulary Mastery: Spaced Repetition & Resources 5.6 Verbal Section-Level Adaptation & Pacing

6 Quant: Arithmetic

6.1 Integers, Divisibility, Primes, Remainders & Odd/Even 6.2 Exponents, Roots, Estimation, Percent, Ratio & Rate 6.3 Absolute Value, Number Line, Decimals & Sequences

7 Quant: Algebra

7.1 Operations with Exponents & Simplifying Algebraic Expressions 7.2 Relations, Functions, Equations & Inequalities 7.3 Linear & Quadratic Equations and Inequalities 7.4 Simultaneous Equations & Inequalities 7.5 Word Problems to Equations & Coordinate Geometry

8 Quant: Geometry

8.1 Lines, Circles, Triangles, Quadrilaterals & Polygons 8.2 Congruent & Similar Figures, 3D Figures, Area/Perimeter/Volume 8.3 Pythagorean Theorem & Angle Measurement

9 Quant: Data Analysis

9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles 9.2 Data Interpretation: Tables, Graphs & Frequency Distributions 9.3 Probability: Compound, Independent & Conditional Events 9.4 Counting Methods, Combinations, Permutations, Venn & Normal Distributions

10 Quant: Question Types, DI Sets, Calculator & Conventions

10.1 Quantitative Comparison: Strategy & Plug-In 10.2 Multiple-Choice — Select One Answer 10.3 Multiple-Choice — Select One or More 10.4 Numeric Entry Strategy 10.5 Data Interpretation Sets 10.6 On-Screen Calculator: When to Use & Estimation 10.7 Math Conventions & Figure Assumptions

11 Test-Day Strategy & Study Planning

11.1 Test-Day Strategy: Pacing, Mark/Review, Unscored Questions 11.2 Score Interpretation, Sending Scores & Validity 11.3 Study Plan: Timeline, POWERPREP & Resources

7.2 Relations, Functions, Equations & Inequalities

Key Takeaways Explain This Topic AI

A function maps each input to exactly one output; the vertical line test decides whether a graph is a function.

Domain is the set of valid inputs; range is the set of outputs produced.

Inequality rules mirror equation rules, except multiplying or dividing by a negative number FLIPS the inequality sign.

Compound inequalities: 'and' takes the overlap (intersection); 'or' takes the union.

Domain restrictions to scan for: denominators cannot be zero, and even roots require non-negative radicands.

Last updated: July 2026

7.2 Relations, Functions, Equations & Inequalities

Quick Answer: A function maps each input to exactly one output; test graphs with the vertical line test. Inequality rules mirror equation rules, except multiplying or dividing by a negative number flips the inequality sign.

Relations and Functions

A relation is any set of ordered pairs (input, output). A function is a relation where each input (x-value in the domain) pairs with exactly one output (y-value in the range).

Domain: the set of all valid inputs (x-values).

Range: the set of all outputs produced (y-values).

Vertical Line Test

On a graph, the relation is a function if and only if no vertical line intersects the graph more than once. A circle fails the test (a vertical line hits it twice); a parabola passes (any vertical line hits it once at most).

Function Notation

f(x) reads "f of x" and means "the output of f at input x." For f(x) = 3x^2 - 2x + 1:

f(2) = 3(2)^2 - 2(2) + 1 = 12 - 4 + 1 = 9.

f(a) = 3a^2 - 2a + 1 (treat a like any other input).

The GRE may ask you to evaluate composite functions: f(g(x)) means "evaluate g first, then put the result into f." Example with f(x) = 2x + 1 and g(x) = x^2: f(g(3)) = f(9) = 2(9) + 1 = 19.

Equations vs. Inequalities

An equation asserts equality using =. An inequality describes a range using <, >, <=, or >= rather than a single value.

Inequality Symbols

  • Symbol Meaning
  • < strictly less than
  • > strictly greater than
  • <= less than or equal to
  • >= greater than or equal to
  • Inequality Operations - The Critical Flip Rule

Inequality rules mirror equation rules except for one critical case:

  • Operation Direction
  • Add or subtract any number preserved
  • Multiply or divide by positive preserved
  • Multiply or divide by negative FLIPPED

Worked Example 4: Solve -3x + 5 <= 17.

Subtract 5: -3x <= 12.

Divide by -3 and FLIP: x >= -4.

Students lose points by forgetting to flip. Always check: did I multiply or divide by a negative? If yes, flip the sign.

Solving Linear Inequalities

Solve 4(x - 2) > 2x + 6.

Distribute: 4x - 8 > 2x + 6.

Subtract 2x: 2x - 8 > 6.

Add 8: 2x > 14.

Divide by 2 (positive, no flip): x > 7.

The solution is the open interval (7, infinity). On the GRE, you may be asked which values satisfy this - anything greater than 7.

  • Compound Inequalities
  • Two inequalities joined by "and" or "or."

"And" (conjunction): both must hold. The solution is the overlap. Example: x > 2 AND x < 5 gives 2 < x < 5.

"Or" (disjunction): either holds. The solution is the union. Example: x < -1 OR x > 3 gives (-infinity, -1) union (3, infinity).

Functions on the GRE - Common Forms

The GRE tests these function forms often:

Linear: f(x) = mx + b. Domain all real numbers; range all reals.

Quadratic: f(x) = ax^2 + bx + c. Parabola; domain all reals; range depends on direction.

Absolute value: f(x) = |x|. V-shape; range [0, infinity).

Square root: f(x) = sqrt(x). Domain x >= 0; range y >= 0.

Rational: f(x) = 1/x. Domain excludes 0; range excludes 0.

Domain Restrictions to Recognize

Denominators can't be zero: f(x) = 1/(x - 2) has domain x != 2.

Even roots need non-negative radicands: f(x) = sqrt(x - 4) has domain x >= 4.

Logarithms need positive arguments: not on the GRE General Test (no trig/calc), but if encountered, domain x > 0.

Worked Example 5: Find the domain of f(x) = sqrt(2x - 6).

Need 2x - 6 >= 0, so 2x >= 6 and x >= 3.

Domain: [3, infinity).

Range - How to Find It

Finding the range takes more work than the domain because you must analyze the function's behavior.

Linear f(x) = mx + b (m != 0): range is all reals.

Quadratic f(x) = ax^2 + bx + c: parabola. If a > 0, range is [vertex y, infinity). If a < 0, range is (-infinity, vertex y].

Square root f(x) = sqrt(x): range is [0, infinity).

Absolute value f(x) = |x|: range is [0, infinity).

Rational f(x) = 1/x: range is all reals except 0.

The vertex of a parabola ax^2 + bx + c sits at x = -b / (2a). Plug that x back in to get the y-coordinate.

Worked Example 6: Find the range of f(x) = -x^2 + 4x - 1.

a = -1 < 0, so parabola opens downward and the vertex is a maximum.

x-coordinate of vertex: x = -b / (2a) = -4 / (2 * -1) = 2.

y-coordinate: f(2) = -(2)^2 + 4(2) - 1 = -4 + 8 - 1 = 3.

Range: (-infinity, 3].

Quick Strategic Points

For function graphs, scan for vertical line test failures.

For composite functions, work inside-out: g first, then f.

For inequalities, always check the flip.

For domain questions, scan denominators and even roots.

For range questions on quadratics, find the vertex y-coordinate using x = -b / (2a).

For QC function comparisons, test boundary points and a value inside the domain.

Loading diagram... The Inequality Flip Rule Decision Tree