Study guide

6.3 Absolute Value, Number Line, Decimals & Sequences

GRE General Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the GRE General Test 1.2 Test Format & Structure (Shortened Post-September 2023 Format) 1.3 Scoring System, Score Scales & Percentiles 1.4 Registration, Fees, Retake Policy & ScoreSelect

2 Analytical Writing Measure

2.1 Analytical Writing Overview & 'Analyze an Issue' Task 2.2 Issue Essay: Thesis, Structure & Evidence 2.3 Issue Essay: Timing, Planning & Drafting Process 2.4 Analytical Writing Scoring Rubric (0–6) & e-rater 2.5 Common Pitfalls & Template Traps to Avoid

3 Verbal: Reading Comprehension

3.1 Reading Comprehension Overview & Passage Types 3.2 RC Multiple-Choice — Select One Answer 3.3 RC Multiple-Choice — Select One or More 3.4 RC Select-in-Passage 3.5 RC Active Reading & Main Idea 3.6 RC Inference, Assumptions & Author's Perspective 3.7 RC Pacing & Unfamiliar Passages

4 Verbal: Text Completion

4.1 Text Completion Question Structure & Blanks 4.2 TC Single-Blank Strategy 4.3 TC Multi-Blank Strategy & Signal Words 4.4 TC Vocabulary Traps & Common GRE Words

5 Verbal: SE, Vocab & Pacing

5.1 Sentence Equivalence Question Structure 5.2 SE Strategy: Predict & Match 5.3 SE Traps: Synonyms That Don't Fit 5.4 High-Frequency GRE Vocabulary 5.5 Vocabulary Mastery: Spaced Repetition & Resources 5.6 Verbal Section-Level Adaptation & Pacing

6 Quant: Arithmetic

6.1 Integers, Divisibility, Primes, Remainders & Odd/Even 6.2 Exponents, Roots, Estimation, Percent, Ratio & Rate 6.3 Absolute Value, Number Line, Decimals & Sequences

7 Quant: Algebra

7.1 Operations with Exponents & Simplifying Algebraic Expressions 7.2 Relations, Functions, Equations & Inequalities 7.3 Linear & Quadratic Equations and Inequalities 7.4 Simultaneous Equations & Inequalities 7.5 Word Problems to Equations & Coordinate Geometry

8 Quant: Geometry

8.1 Lines, Circles, Triangles, Quadrilaterals & Polygons 8.2 Congruent & Similar Figures, 3D Figures, Area/Perimeter/Volume 8.3 Pythagorean Theorem & Angle Measurement

9 Quant: Data Analysis

9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles 9.2 Data Interpretation: Tables, Graphs & Frequency Distributions 9.3 Probability: Compound, Independent & Conditional Events 9.4 Counting Methods, Combinations, Permutations, Venn & Normal Distributions

10 Quant: Question Types, DI Sets, Calculator & Conventions

10.1 Quantitative Comparison: Strategy & Plug-In 10.2 Multiple-Choice — Select One Answer 10.3 Multiple-Choice — Select One or More 10.4 Numeric Entry Strategy 10.5 Data Interpretation Sets 10.6 On-Screen Calculator: When to Use & Estimation 10.7 Math Conventions & Figure Assumptions

11 Test-Day Strategy & Study Planning

11.1 Test-Day Strategy: Pacing, Mark/Review, Unscored Questions 11.2 Score Interpretation, Sending Scores & Validity 11.3 Study Plan: Timeline, POWERPREP & Resources

6.3 Absolute Value, Number Line, Decimals & Sequences

Key Takeaways Explain This Topic AI

Absolute value |x| = x if x ≥ 0 and |x| = −x if x < 0; |x| ≥ 0 always, and |x| can equal 0 when x = 0.

Distance between a and b on the number line is |b − a|, always nonnegative; the positive direction is to the right.

A fraction p/q in lowest terms terminates if and only if q has no prime factors other than 2 and 5; otherwise it repeats.

Arithmetic sequence nth term: a_n = a_1 + (n − 1)d; sum of first n terms S_n = n/2 × (a_1 + a_n).

Geometric sequence nth term: a_n = a_1 × r^(n−1); sum of first n terms S_n = a_1 × (r^n − 1) / (r − 1) for r ≠ 1.

Last updated: July 2026

Absolute Value, Number Line, Decimals & Sequences

Quick Answer: Absolute value measures distance from zero (always nonnegative), the number line runs rightward positive, decimal representation splits into terminating and repeating forms, and sequences come in arithmetic (common difference d), geometric (common ratio r), and special (Fibonacci) families. GRE QC questions on these topics hinge on whether a value can be negative, zero, or positive.

Absolute Value

|x| = x if x ≥ 0, and |x| = −x if x < 0. Three properties you must internalize:

|x| ≥ 0 for every real x.

|x| = |−x| (symmetry).

Triangle inequality: |a + b| ≤ |a| + |b|.

Solving |x − 3| = 5 means x is 5 units from 3: x = 8 or x = −2. Solving |x| < 4 means −4 < x < 4 (an interval, not a single value).

Worked Example — Absolute Value Inequality

Solve |2x − 5| ≤ 7.

Rewrite as −7 ≤ 2x − 5 ≤ 7.

Add 5: −2 ≤ 2x ≤ 12.

Divide by 2: −1 ≤ x ≤ 6.

Solution: every x in [−1, 6].

For QC, remember |x| can be 0 — so "Quantity A = |a − b|" could be 0 when a = b. Never assume |expression| is strictly positive; if Quantity B is 0, test whether a = b is possible.

Worked Example — QC Trap with Absolute Value

Quantity A: |a − b|. Quantity B: 0. If a and b are real numbers with no other constraint, can |a − b| equal 0? Yes, when a = b. Can it exceed 0? Yes, when a ≠ b. So sometimes A = B (both 0) and sometimes A > B; the answer is (D) — the relationship cannot be determined.

The Number Line

The positive direction is to the right (ETS convention). Integers are evenly spaced. Fractions and decimals occupy positions between integers. The distance between a and b is |b − a| , always nonnegative.

Worked Example — Distance and Midpoint

On a number line, points at −3 and 7. Distance = |7 − (−3)| = 10. Midpoint = (−3 + 7)/2 = 2.

GRE often plots variables a, b, c on a line and asks comparisons. If the figure shows b between a and c, then a < b < c. But geometric figures are NOT necessarily drawn to scale for lengths — only the order is reliable unless explicitly stated. Coordinate axes and bar/circle/line graphs, by contrast, ARE drawn to scale.

Loading diagram... Converting 0.72̄ to a Fraction

Decimal Representation

Every rational number has a decimal expansion that is either terminating (1/4 = 0.25) or repeating (1/3 = 0.333..., 1/7 = 0.142857142857...).

A fraction p/q in lowest terms terminates if and only if q has no prime factors other than 2 and 5. So 1/8 (q = 2³) terminates, but 1/6 (q = 2 × 3) repeats.

  • Fraction Decimal Type
  • 1/2 0.5 terminating
  • 1/4 0.25 terminating
  • 1/5 0.2 terminating
  • 1/8 0.125 terminating
  • 1/3 0.333... repeating
  • 1/6 0.1666... repeating
  • 1/7 0.142857... repeating (period 6)
  • 1/11 0.090909... repeating (period 2)
  • Worked Example — Convert 0.72̄ (0.7222...) to a Fraction

Let x = 0.7222...

10x = 7.222...

100x = 72.222...

Subtract: 100x − 10x = 72.222... − 7.222... = 65 → 90x = 65 → x = 65/90 = 13/18.

For a purely repeating decimal with period k, the denominator is (10^k − 1): 0.3636... = 36/99 = 4/11. For a mixed decimal like 0.72̄, multiply by 10^(number of non-repeating digits) and again by 10^(number of repeating digits), then subtract.

Sequences

Three families dominate GRE sequence questions.

Arithmetic Sequences

Each term differs from the previous by a constant d. nth term: a_n = a_1 + (n − 1)d. Sum of first n terms: S_n = n/2 × (a_1 + a_n).

Worked example : 5, 9, 13, 17, ... Find the 20th term.

a_1 = 5, d = 4. a_20 = 5 + 19 × 4 = 5 + 76 = 81.

Sum of first 20: S_20 = 20/2 × (5 + 81) = 10 × 86 = 860.

Geometric Sequences

Each term is r times the previous. nth term: a_n = a_1 × r^(n−1). Sum of first n terms: S_n = a_1 × (r^n − 1) / (r − 1), for r ≠ 1.

Worked example : 3, 6, 12, 24, ... Find a_6.

a_1 = 3, r = 2. a_6 = 3 × 2⁵ = 3 × 32 = 96.

Special Sequences

The Fibonacci sequence: 1, 1, 2, 3, 5, 8, 13, 21, ... each term is the sum of the two preceding. The GRE usually defines any nonstandard sequence explicitly ("a_n = a_(n−1) + a_(n−2) − 1"); always plug the given recurrence rather than assume a familiar pattern.

Worked Example — Recurrence Plug-In

A sequence is defined by a_1 = 2 and a_n = 3a_(n−1) − 1. Find a_4.

a_2 = 3(2) − 1 = 5.

a_3 = 3(5) − 1 = 14.

a_4 = 3(14) − 1 = 41.

GRE sequences reward careful indexing — write a_1, a_2, a_3 explicitly before trusting a closed-form formula. A common error is to use a_n = a_1 + (n − 1)d for a recurrence that is NOT arithmetic; if the question defines the sequence recursively, compute term by term instead.