Study guide
9.2 Data Interpretation: Tables, Graphs & Frequency Distributions
GRE General Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the GRE General Test 1.2 Test Format & Structure (Shortened Post-September 2023 Format) 1.3 Scoring System, Score Scales & Percentiles 1.4 Registration, Fees, Retake Policy & ScoreSelect
2 Analytical Writing Measure
2.1 Analytical Writing Overview & 'Analyze an Issue' Task 2.2 Issue Essay: Thesis, Structure & Evidence 2.3 Issue Essay: Timing, Planning & Drafting Process 2.4 Analytical Writing Scoring Rubric (0–6) & e-rater 2.5 Common Pitfalls & Template Traps to Avoid
3 Verbal: Reading Comprehension
3.1 Reading Comprehension Overview & Passage Types 3.2 RC Multiple-Choice — Select One Answer 3.3 RC Multiple-Choice — Select One or More 3.4 RC Select-in-Passage 3.5 RC Active Reading & Main Idea 3.6 RC Inference, Assumptions & Author's Perspective 3.7 RC Pacing & Unfamiliar Passages
4 Verbal: Text Completion
4.1 Text Completion Question Structure & Blanks 4.2 TC Single-Blank Strategy 4.3 TC Multi-Blank Strategy & Signal Words 4.4 TC Vocabulary Traps & Common GRE Words
5 Verbal: SE, Vocab & Pacing
5.1 Sentence Equivalence Question Structure 5.2 SE Strategy: Predict & Match 5.3 SE Traps: Synonyms That Don't Fit 5.4 High-Frequency GRE Vocabulary 5.5 Vocabulary Mastery: Spaced Repetition & Resources 5.6 Verbal Section-Level Adaptation & Pacing
6 Quant: Arithmetic
6.1 Integers, Divisibility, Primes, Remainders & Odd/Even 6.2 Exponents, Roots, Estimation, Percent, Ratio & Rate 6.3 Absolute Value, Number Line, Decimals & Sequences
7 Quant: Algebra
7.1 Operations with Exponents & Simplifying Algebraic Expressions 7.2 Relations, Functions, Equations & Inequalities 7.3 Linear & Quadratic Equations and Inequalities 7.4 Simultaneous Equations & Inequalities 7.5 Word Problems to Equations & Coordinate Geometry
8 Quant: Geometry
8.1 Lines, Circles, Triangles, Quadrilaterals & Polygons 8.2 Congruent & Similar Figures, 3D Figures, Area/Perimeter/Volume 8.3 Pythagorean Theorem & Angle Measurement
9 Quant: Data Analysis
9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles 9.2 Data Interpretation: Tables, Graphs & Frequency Distributions 9.3 Probability: Compound, Independent & Conditional Events 9.4 Counting Methods, Combinations, Permutations, Venn & Normal Distributions
10 Quant: Question Types, DI Sets, Calculator & Conventions
10.1 Quantitative Comparison: Strategy & Plug-In 10.2 Multiple-Choice — Select One Answer 10.3 Multiple-Choice — Select One or More 10.4 Numeric Entry Strategy 10.5 Data Interpretation Sets 10.6 On-Screen Calculator: When to Use & Estimation 10.7 Math Conventions & Figure Assumptions
11 Test-Day Strategy & Study Planning
11.1 Test-Day Strategy: Pacing, Mark/Review, Unscored Questions 11.2 Score Interpretation, Sending Scores & Validity 11.3 Study Plan: Timeline, POWERPREP & Resources
9.2 Data Interpretation: Tables, Graphs & Frequency Distributions
Key Takeaways Explain This Topic AI
GRE Data Interpretation sets share one set of tables or graphs across 2–3 consecutive questions; read the data once carefully, then attack each question with that context loaded.
Coordinate axes, bar heights, pie sector angles, and line positions ARE drawn to scale — you can estimate values visually; geometric figures are NOT.
Percent of total in a pie chart = sector angle / 360 = sector percent / 100; always confirm whether percents sum to 100 or whether a 'Other' category is implied.
Distinguish percent from percentage point: a change from 40% to 50% is a 10 percentage-point increase but a 25% relative increase.
Histograms use contiguous bars (continuous data) while bar charts use separated bars (categorical data); the area of a histogram bar, not its height, can represent frequency when bin widths vary.
Last updated: July 2026
Data Interpretation: Tables, Graphs & Frequency Distributions
Quick Answer: GRE DI questions come in sets of 2–3 around shared data. Read the table or graph once — note scales, units, and totals — then answer each question. Graphical data IS drawn to scale, so visual estimation is fair game. The biggest traps are percent vs. percentage point, unit mismatches (thousands vs. millions), and pie charts with an implied 'Other' category.
The DI Set Format
On the GRE, DI questions appear in clusters. A single table or graph is followed by 2–3 questions, each using the same data. This is efficient: 30 seconds invested up front in understanding the data pays off across all three questions. Always:
Read the title and any subtitle (they define what is being measured).
Check the units (dollars, thousands of dollars, percent, millions of people).
Note whether values are exact or rounded, and whether row/column totals are given.
Identify the highest and lowest values — DI questions often ask about extremes.
Reading Tables
Tables organize data into rows and columns, often with marginal totals (row totals at the right, column totals at the bottom). A frequent trap: a cell value looks like a total but is actually a subtotal. Always check whether the bottom-right cell equals the sum of row totals and the sum of column totals — if it does, the table is fully specified; if not, a category is missing.
Sample Table — Enrollment by School and Year (thousands)
- School 2018 2019 2020 Total
- Public 420 435 410 1,265
- Private 90 95 110 295
- Charter 60 70 85 215
- Total 570 600 605 1,775
The bottom-right cell 1,775 equals both the sum of the right column (1,265 + 295 + 215) and the sum of the bottom row (570 + 600 + 605), confirming the table is internally consistent.
Bar Graphs and Line Graphs
Bar graphs compare discrete categories. Vertical bars show values; bar heights are drawn to scale. Line graphs show trends over a continuous variable (usually time). Multiple series can be plotted on the same axes — check the legend.
Watch for:
Broken axes (a zigzag near the base) — magnifies differences; estimate the true gap.
Stacked bars — segment heights add; the top of the stack is the total.
Dual y-axes — left axis for one series, right for another; mixing them is a common trap.
Circle (Pie) Graphs
A pie chart represents parts of a whole. Each sector's angle is proportional to its share:
percent of total = sector angle / 360
If a sector labeled "Marketing" subtends 90°, Marketing is 90/360 = 25% of the total. Pie charts always sum to 100% (or 360°) — if the labeled percents sum to less than 100, an "Other" or "Unaccounted" category is implied.
Worked Example — Pie Chart with Missing Category
A company's budget pie shows: Research 35%, Marketing 25%, Operations 20%, Salaries 15%. Sum = 95%. The remaining 5% is an implied category (likely "Other" or "Profit"). A GRE question might ask "What percent is unaccounted for?" — answer: 5%.
Scatterplots
A scatterplot shows the relationship between two variables, one on each axis. Each point is one observation. Pattern reading:
Positive association : points trend up-right.
Negative association : points trend down-right.
No association : scattered cloud.
Linear vs. non-linear : straight-line pattern vs. curved.
The GRE does NOT test correlation coefficients or regression (that would be inferential statistics — out of scope). You only need to describe the visual pattern.
Frequency Distributions
A frequency distribution counts how many observations fall into each category or bin.
Relative frequency = frequency / total (often expressed as a percent).
Cumulative frequency = running total of frequencies up to that bin.
Cumulative relative frequency = running total of relative frequencies; reaches 1.0 (100%) at the last bin.
Sample Frequency Distribution
Score Range Frequency Relative Freq. Cumulative Freq.
- 0–20 2 0.10 2
- 21–40 5 0.25 7
- 41–60 8 0.40 15
- 61–80 4 0.20 19
- 81–100 1 0.05 20
- Total 20 1.00 —
- Histograms vs. Bar Charts
Histogram : contiguous bars, continuous data (score ranges, ages, incomes). Bar height = frequency. When bin widths are equal, height is proportional to frequency; when widths vary, AREA equals frequency.
Bar chart : separated bars, categorical data (countries, months, brands). Height = value.
GRE trap: a histogram with unequal bin widths can show a taller bar over a wider bin with fewer observations — always check whether height or area encodes frequency.
Percent vs. Percentage Point — A Top DI Trap
If a rate rises from 40% to 50%:
The percentage-point change is 50 − 40 = 10 percentage points.
The relative (percent) change is (50 − 40)/40 × 100 = 25%.
GRE questions exploit the confusion: "The unemployment rate increased by 5%" is ambiguous, but ETS typically means 5 percentage points when discussing rates. Read carefully.
Unit Conversions
DI data often comes in thousands, millions, or billions. A table labeled "Revenue (thousands of dollars)" with value 4,500 means $4,500,000. Forgetting the unit multiplier is the most common DI arithmetic error. Always write the unit next to the number when you copy it onto scratch paper.
Sample DI Set — Two Worked Questions
Shared data : The table below shows a company's quarterly sales (in thousands of units) by region.
- Region Q1 Q2 Q3 Q4
- North 12 15 18 20
- South 8 10 11 14
- East 6 7 9 12
- West 10 12 14 16
Question 1 : In Q4, what percent of total sales did the North region account for (to the nearest whole percent)?
Q4 total = 20 + 14 + 12 + 16 = 62.
North share = 20/62 ≈ 0.3226 → 32%.
Question 2 : From Q1 to Q4, the East region's sales increased by what percent (to the nearest whole percent)?
Percent change = (12 − 6)/6 × 100 = 100%. East's sales doubled.
These two questions show why reading the data once pays off: the table is loaded into working memory, and each question becomes a quick calculation.