Study guide
9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles
GRE General Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the GRE General Test 1.2 Test Format & Structure (Shortened Post-September 2023 Format) 1.3 Scoring System, Score Scales & Percentiles 1.4 Registration, Fees, Retake Policy & ScoreSelect
2 Analytical Writing Measure
2.1 Analytical Writing Overview & 'Analyze an Issue' Task 2.2 Issue Essay: Thesis, Structure & Evidence 2.3 Issue Essay: Timing, Planning & Drafting Process 2.4 Analytical Writing Scoring Rubric (0–6) & e-rater 2.5 Common Pitfalls & Template Traps to Avoid
3 Verbal: Reading Comprehension
3.1 Reading Comprehension Overview & Passage Types 3.2 RC Multiple-Choice — Select One Answer 3.3 RC Multiple-Choice — Select One or More 3.4 RC Select-in-Passage 3.5 RC Active Reading & Main Idea 3.6 RC Inference, Assumptions & Author's Perspective 3.7 RC Pacing & Unfamiliar Passages
4 Verbal: Text Completion
4.1 Text Completion Question Structure & Blanks 4.2 TC Single-Blank Strategy 4.3 TC Multi-Blank Strategy & Signal Words 4.4 TC Vocabulary Traps & Common GRE Words
5 Verbal: SE, Vocab & Pacing
5.1 Sentence Equivalence Question Structure 5.2 SE Strategy: Predict & Match 5.3 SE Traps: Synonyms That Don't Fit 5.4 High-Frequency GRE Vocabulary 5.5 Vocabulary Mastery: Spaced Repetition & Resources 5.6 Verbal Section-Level Adaptation & Pacing
6 Quant: Arithmetic
6.1 Integers, Divisibility, Primes, Remainders & Odd/Even 6.2 Exponents, Roots, Estimation, Percent, Ratio & Rate 6.3 Absolute Value, Number Line, Decimals & Sequences
7 Quant: Algebra
7.1 Operations with Exponents & Simplifying Algebraic Expressions 7.2 Relations, Functions, Equations & Inequalities 7.3 Linear & Quadratic Equations and Inequalities 7.4 Simultaneous Equations & Inequalities 7.5 Word Problems to Equations & Coordinate Geometry
8 Quant: Geometry
8.1 Lines, Circles, Triangles, Quadrilaterals & Polygons 8.2 Congruent & Similar Figures, 3D Figures, Area/Perimeter/Volume 8.3 Pythagorean Theorem & Angle Measurement
9 Quant: Data Analysis
9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles 9.2 Data Interpretation: Tables, Graphs & Frequency Distributions 9.3 Probability: Compound, Independent & Conditional Events 9.4 Counting Methods, Combinations, Permutations, Venn & Normal Distributions
10 Quant: Question Types, DI Sets, Calculator & Conventions
10.1 Quantitative Comparison: Strategy & Plug-In 10.2 Multiple-Choice — Select One Answer 10.3 Multiple-Choice — Select One or More 10.4 Numeric Entry Strategy 10.5 Data Interpretation Sets 10.6 On-Screen Calculator: When to Use & Estimation 10.7 Math Conventions & Figure Assumptions
11 Test-Day Strategy & Study Planning
11.1 Test-Day Strategy: Pacing, Mark/Review, Unscored Questions 11.2 Score Interpretation, Sending Scores & Validity 11.3 Study Plan: Timeline, POWERPREP & Resources
9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles
Key Takeaways Explain This Topic AI
Mean is sensitive to outliers; median is resistant. A single extreme value can pull the mean far from the median, and GRE Quantitative Comparison questions exploit the gap.
Adding a constant k to every value shifts mean and median by k, leaves range and SD unchanged; multiplying every value by c scales mean, median, range, and SD by |c|.
GRE population standard deviation = sqrt( (1/n) × Σ(x_i − mean)² ); interpretation matters more than computation — compare spreads, not exact values.
Quartiles split sorted data into four equal parts: Q1 = 25th percentile, Q2 = median, Q3 = 75th percentile; IQR = Q3 − Q1 measures the spread of the middle 50%.
A value at the 80th percentile equals or exceeds 80% of the data; percentile rank is about position within a distribution, never about the value's magnitude.
Last updated: July 2026
Descriptive Statistics: Center, Spread, and Position
Quick Answer: GRE data-analysis questions reward interpretation over raw computation. Know which measures of center are resistant to outliers (median, mode) versus sensitive (mean), how adding or multiplying a constant transforms each statistic, and how quartiles, percentiles, IQR, and standard deviation describe spread. The on-screen calculator can compute arithmetic averages, but most QC questions are decided by reasoning about properties, not by long division.
Measures of Center
Given a data set, three statistics describe its typical value:
Mean (arithmetic average) : sum of values divided by count. Sensitive to outliers — a single extreme value pulls the mean toward itself.
Median : middle value of a sorted list. With n values, median position = (n + 1)/2. With an even count, median is the average of the two middle values. Resistant to outliers.
Mode : most frequently occurring value. A data set can have no mode, one mode, or multiple modes. The mode is the only center measure that applies to non-numeric (categorical) data.
Worked Example — Outlier Shifts Mean, Not Median
Data: {4, 5, 6, 7, 100}. Mean = (4 + 5 + 6 + 7 + 100)/5 = 122/5 = 24.4. Median = 6 (third value of five sorted values). The outlier 100 pulls the mean to 24.4, about four times the median. A classic GRE QC exploit: Quantity A = mean of {4, 5, 6, 7, 100}; Quantity B = 7. Mean = 24.4 exceeds 7, so the answer is A — but the trap is assuming the mean equals the median and choosing C. Read carefully: outliers push the mean far above the median.
Measures of Spread
Range = maximum − minimum. Simplest spread measure; sensitive to outliers.
Interquartile range (IQR) = Q3 − Q1. Resistant to outliers because it ignores the bottom 25% and top 25%.
Standard deviation (SD) measures typical distance of values from the mean. Larger SD = more spread.
Variance = SD².
Quartiles and IQR
Sort the data, then split into four equal-sized groups. Q1 is the median of the lower half, Q2 is the overall median, Q3 is the median of the upper half. The five-number summary is {min, Q1, Q2, Q3, max}.
Worked Example — Five-Number Summary
Data: {2, 4, 6, 8, 10, 12, 14, 16}. n = 8. Median = (8 + 10)/2 = 9. Lower half {2, 4, 6, 8} has median (4 + 6)/2 = 5 = Q1. Upper half {10, 12, 14, 16} has median (12 + 14)/2 = 13 = Q3. IQR = 13 − 5 = 8. Range = 16 − 2 = 14.
Standard Deviation — Formula and Interpretation
The GRE uses the population standard deviation formula:
σ = √( (1/n) × Σ(x_i − μ)² )
where μ is the mean of the n values. The sample formula divides by (n − 1) instead of n, but the GRE does not test that distinction — focus on interpretation:
SD ≥ 0, and SD = 0 only when every value equals the mean.
Adding the same constant to every value does not change SD (spread unchanged).
Multiplying every value by a positive constant c multiplies SD by c.
Comparing two data sets: the one whose values sit farther from its mean has the larger SD.
Worked Example — Compare Spreads Without Computing
Set A: {4, 5, 6, 7, 8}. Set B: {2, 5, 6, 7, 10}. Both have mean 6. Set A's deviations from 6: {−2, −1, 0, 1, 2}. Set B's deviations: {−4, −1, 0, 1, 4}. Set B's squared deviations are larger (16 vs. 4 at the extremes), so Set B has the larger SD. No arithmetic needed — compare distances from the mean.
Percentiles
The kth percentile is the value below which k% of the data falls. To find the percentile rank of a value v: count how many values are strictly less than v, divide by n, multiply by 100. A score at the 80th percentile equals or exceeds 80% of the data — it is a position measure, not a percentage of a maximum score.
Worked Example — Percentile Trap
A student scores 72 on a test and is told she is at the 90th percentile. A common GRE trap: "She got 90% of the questions right." Wrong. She scored better than 90% of test takers; the percent correct is unrelated unless the test reports it separately.
Effect of Transformations — Memorize This Table
- Operation Mean Median Mode Range SD
- Add k to every value +k +k +k unchanged unchanged
- Subtract k from every value −k −k −k unchanged unchanged
- Multiply every value by c (c > 0) ×c ×c ×c ×c ×c
- Multiply every value by −1 ×(−1) ×(−1) ×(−1) unchanged unchanged
- Worked Example — QC with Transformations
Quantity A: SD of {10, 20, 30, 40, 50}. Quantity B: SD of {20, 40, 60, 80, 100}. Set B is set A × 2, so SD(B) = 2 × SD(A). Answer: B is larger. No computation required.
- Choosing the Right Measure
- Symmetric distribution: mean ≈ median; either works as "typical."
Skewed distribution or outliers: use median.
Categorical data: use mode.
Spread with outliers: use IQR over range or SD.
The GRE loves to ask "which statistic is most appropriate?" — the answer hinges on whether outliers or skew are present.