Study guide
10.7 Math Conventions & Figure Assumptions
GRE General Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the GRE General Test 1.2 Test Format & Structure (Shortened Post-September 2023 Format) 1.3 Scoring System, Score Scales & Percentiles 1.4 Registration, Fees, Retake Policy & ScoreSelect
2 Analytical Writing Measure
2.1 Analytical Writing Overview & 'Analyze an Issue' Task 2.2 Issue Essay: Thesis, Structure & Evidence 2.3 Issue Essay: Timing, Planning & Drafting Process 2.4 Analytical Writing Scoring Rubric (0–6) & e-rater 2.5 Common Pitfalls & Template Traps to Avoid
3 Verbal: Reading Comprehension
3.1 Reading Comprehension Overview & Passage Types 3.2 RC Multiple-Choice — Select One Answer 3.3 RC Multiple-Choice — Select One or More 3.4 RC Select-in-Passage 3.5 RC Active Reading & Main Idea 3.6 RC Inference, Assumptions & Author's Perspective 3.7 RC Pacing & Unfamiliar Passages
4 Verbal: Text Completion
4.1 Text Completion Question Structure & Blanks 4.2 TC Single-Blank Strategy 4.3 TC Multi-Blank Strategy & Signal Words 4.4 TC Vocabulary Traps & Common GRE Words
5 Verbal: SE, Vocab & Pacing
5.1 Sentence Equivalence Question Structure 5.2 SE Strategy: Predict & Match 5.3 SE Traps: Synonyms That Don't Fit 5.4 High-Frequency GRE Vocabulary 5.5 Vocabulary Mastery: Spaced Repetition & Resources 5.6 Verbal Section-Level Adaptation & Pacing
6 Quant: Arithmetic
6.1 Integers, Divisibility, Primes, Remainders & Odd/Even 6.2 Exponents, Roots, Estimation, Percent, Ratio & Rate 6.3 Absolute Value, Number Line, Decimals & Sequences
7 Quant: Algebra
7.1 Operations with Exponents & Simplifying Algebraic Expressions 7.2 Relations, Functions, Equations & Inequalities 7.3 Linear & Quadratic Equations and Inequalities 7.4 Simultaneous Equations & Inequalities 7.5 Word Problems to Equations & Coordinate Geometry
8 Quant: Geometry
8.1 Lines, Circles, Triangles, Quadrilaterals & Polygons 8.2 Congruent & Similar Figures, 3D Figures, Area/Perimeter/Volume 8.3 Pythagorean Theorem & Angle Measurement
9 Quant: Data Analysis
9.1 Descriptive Statistics: Mean, Median, Mode, Range, SD, IQR, Quartiles, Percentiles 9.2 Data Interpretation: Tables, Graphs & Frequency Distributions 9.3 Probability: Compound, Independent & Conditional Events 9.4 Counting Methods, Combinations, Permutations, Venn & Normal Distributions
10 Quant: Question Types, DI Sets, Calculator & Conventions
10.1 Quantitative Comparison: Strategy & Plug-In 10.2 Multiple-Choice — Select One Answer 10.3 Multiple-Choice — Select One or More 10.4 Numeric Entry Strategy 10.5 Data Interpretation Sets 10.6 On-Screen Calculator: When to Use & Estimation 10.7 Math Conventions & Figure Assumptions
11 Test-Day Strategy & Study Planning
11.1 Test-Day Strategy: Pacing, Mark/Review, Unscored Questions 11.2 Score Interpretation, Sending Scores & Validity 11.3 Study Plan: Timeline, POWERPREP & Resources
10.7 Math Conventions & Figure Assumptions
Key Takeaways Explain This Topic AI
Numbers in GRE math are real numbers; all figures lie in a plane; lines shown as straight are straight.
Geometric figures are NOT drawn to scale - never estimate angles, lengths, or areas from a geometry drawing; derive from given information.
Coordinate systems, bar/line/pie graphs, and number lines ARE drawn to scale - visual estimation from axes is legitimate.
A prime is a positive integer greater than 1 divisible only by 1 and itself; 1 is not prime; 2 is the smallest prime and the only even prime.
The square root symbol denotes the nonnegative root only (sqrt(25) = 5, not +/-5); decimal points (not commas) separate integer from fractional parts, while commas serve as thousands separators.
Last updated: July 2026
10.7 Math Conventions & Figure Assumptions
Quick Answer: GRE math uses real numbers, planar figures, and straight lines. Geometric figures are NOT drawn to scale - derive from given information, not the picture. Coordinate planes and data graphs ARE drawn to scale. A prime is a positive integer > 1 divisible only by 1 and itself; sqrt denotes the nonnegative root.
Why Conventions Matter
The GRE Math Conventions PDF (free on ETS.org) fixes the assumptions underlying every Quant question. Knowing them prevents two costly mistakes: reading too much into a geometry figure, and ignoring the legitimate information a graph provides. The conventions are short, testable, and several appear directly as question traps.
The Full Convention List
The ETS Math Conventions document specifies the following. Each is a rule, not a suggestion.
Convention Meaning
Numbers are real All quantities are real numbers unless stated otherwise; complex numbers do not appear on the GRE General Test.
Figures lie in a plane Geometric figures are assumed to be in a single plane.
Lines shown straight are straight If a line is drawn straight, it is straight; same for line segments.
Geometric figures NOT drawn to scale You cannot estimate lengths, angles, or areas from a geometry drawing.
Coordinate systems drawn to scale Axes, gridlines, and plotted points are to scale.
Graphical data drawn to scale Bar, line, and pie charts reflect their labeled values.
Number lines drawn to scale Positions on a number line correspond to relative magnitude.
Positive direction of axes Up and to the right are the positive directions.
Primes are positive integers > 1 A prime is divisible only by 1 and itself; 1 is not prime; 2 is prime.
Square root denotes the nonnegative root sqrt(25) = 5, not +/-5.
Fraction bars are division a/b means a divided by b.
Decimal point separates integer from fraction 3.5 means 3 + 5/10; commas are thousands separators.
Interval notation (a, b) is open; [a, b] is closed; [a, infinity) is half-open.
Percent means per hundred 5% = 5/100 = 0.05.
Absolute value |x| is the nonnegative distance from x to 0.
Common geometric abbreviations Triangle ABC, angle A, segment AB, line l, etc.
The Figure-Assumption Rule (Critical)
This is the single most-tested convention. Geometric figures are not drawn to scale. That triangle that looks equilateral might be scalene. That angle that looks like 90 degrees might be 89 or 91. That circle that looks like it has radius 5 might have radius 50.
What You CANNOT Assume from a Geometry Figure
Angle measures (a drawn right angle is not necessarily 90 degrees unless marked).
Length proportions (a segment that looks twice as long is not necessarily twice as long).
Parallelism (two lines that look parallel may not be).
Perpendicularity (two segments that look perpendicular may not be, unless the right-angle square marker is shown).
Shape regularity (a polygon that looks regular may not be).
Area or relative area.
What You CAN Assume from a Geometry Figure
Straight lines are straight (if drawn straight).
Points are in the relative positions shown (a point labeled inside a circle is inside the circle).
The order of points on a line is as drawn.
If a right-angle square marker is drawn at a vertex, the angle is 90 degrees.
If parallel arrows (>>) are drawn on two lines, they are parallel.
If equal-length tick marks appear on segments, those segments are equal.
The Trap in Action
A triangle is drawn with two sides appearing equal, but no tick marks. You cannot assume it is isosceles. Compute from given information: if the stem says AB = AC, then it is isosceles; if the stem is silent, treat it as a general triangle.
Another classic: a quadrilateral is drawn to look like a square, but no right-angle markers and no equal-length tick marks. You cannot assume it is a square. If the stem calls it a rectangle, you may assume four right angles but not equal sides. If the stem calls it a rhombus, you may assume four equal sides but not right angles. Only a square - or a rectangle with tick marks - gives both.
When You CAN Read a Figure
Coordinate planes, number lines, and data graphics are drawn to scale. You may estimate from them.
Coordinate Plane
The x and y axes are perpendicular and to scale (though the units per gridline may differ between axes).
A plotted point's coordinates can be read off the axes.
The slope of a line can be estimated visually as positive, negative, zero, or undefined, and approximated by rise/run from the gridlines.
A parabola's vertex can be located approximately.
Number Line
Relative positions correspond to magnitude: a point further right is larger.
Equal spacings correspond to equal differences (if gridlines are shown).
Bar, Line, and Pie Charts
Bar heights correspond to values on the y-axis.
Line graph points correspond to values at the labeled x-positions.
Pie wedge angles correspond to proportions (a 25% slice is a 90-degree wedge).
The Prime Convention
ETS defines a prime as a positive integer greater than 1 divisible only by 1 and itself. Consequences:
1 is not prime. This is the most-tested prime convention; the GRE loves the trap of listing 1 as prime.
2 is the smallest prime and the only even prime.
Negative numbers are not prime. Primes are positive by definition.
0 is not prime. It is not greater than 1.
The first ten primes: 2, 3, 5, 7, 11, 13, 17, 19, 23, 29.
The Square Root Convention
The radical symbol sqrt denotes the nonnegative root only. So sqrt(25) = 5, not +/-5. If the GRE wants both roots, it writes +/-sqrt(25) or asks for the solutions to x^2 = 25 explicitly.
Consequence for QC questions: if Quantity A is sqrt(16) and Quantity B is -4, Quantity A is greater (4 > -4). A common trap is treating sqrt(16) as +/-4 and answering D (cannot be determined).
Decimal and Comma Conventions
The GRE uses the American convention:
Decimal point separates integer from fractional part: 3.5 = 3 + 5/10.
Comma is a thousands separator: 1,000 = one thousand.
The GRE does NOT use the European convention (comma for decimal, period for thousands).
If you are an international test-taker, train yourself to read 3,5 as 35 (mistaken) and 3.5 as three and a half (correct). The on-screen calculator uses the decimal point for entry; do not type a comma.
Interval Notation
- Notation Meaning
- (a, b) a < x < b, open at both ends
- [a, b] a <= x <= b, closed at both ends
- (a, b] a < x <= b, half-open
- [a, b) a <= x < b, half-open
- (a, infinity) x > a
- [a, infinity) x >= a
- (-infinity, b) x < b
Infinity always uses a parenthesis, never a bracket, because infinity is not a number.
Worked Example: Geometry Figure Trap
A triangle ABC is drawn with AB and AC appearing equal and angle A appearing to be 60 degrees. The stem gives AB = 5 and BC = 5 but says nothing about angle A.
Question (QC): Quantity A: the measure of angle A. Quantity B: 60 degrees.
You CANNOT assume angle A is 60 degrees just because it looks like it - figures are not drawn to scale.
But AB = 5 and BC = 5 means triangle ABC is isosceles with AB = BC (given).
The stem does not give AC, and angle A is not determined by the givens.
Different values of AC yield different values of angle A (within triangle inequality constraints).
Answer: D - the relationship cannot be determined from the information given.
The trap is assuming angle A is 60 degrees from the drawing and answering C. The convention - figures are not drawn to scale - is exactly what protects you.
Worked Example: Reading a Coordinate Plane
A line is plotted on a coordinate plane passing through (1, 2) and (4, 8).
Question: What is the slope of the line?
Coordinate planes ARE drawn to scale, so you can read the points from the axes.
Slope = (8 - 2) / (4 - 1) = 6 / 3 = 2.
Visual estimate: rise of 6 over run of 3 confirms slope 2.
Here, reading the figure is legitimate because the convention says coordinate systems are to scale.
Common Convention Traps to Memorize
Primes include 2 but not 1.
sqrt(x^2) = |x|, not x. The nonnegative root means sqrt((-3)^2) = sqrt(9) = 3, not -3.
A drawn right angle is not 90 degrees without the marker.
A drawn equilateral-looking triangle is not equilateral without tick marks or a stem statement.
Coordinate and graphical data are to scale; geometry figures are not.
Decimal point, not comma, separates integer from fraction.
Infinity gets a parenthesis, not a bracket.
Strategic Implications
For geometry questions, write the givens on scratch paper and ignore the picture for measurements. Use the picture only for relative position and for marked information (right-angle squares, tick marks, parallel arrows).
For coordinate and graph questions, use visual estimation freely as a first pass, then verify with computation.
For QC questions involving sqrt, remember the nonnegative convention: sqrt(25) is 5, never -5.
For prime-number questions, immediately rule out 1, 0, and negatives.
For interval-notation questions, check whether endpoints are included; the bracket-versus-parenthesis distinction is the answer to many QC items.