Study guide
18.1 Principal Parts, Lubrication and Cooling
Guyana Learner Driver Theoretical Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Registration, Fees and Study Package 1.3 Sitting Rules, 65 Percent and Re-sits
2 Driver Licensing Law
2.1 Holding and Producing a Driver’s Licence 2.2 Provisional Licences and the Competence Test 2.3 Medical Fitness, Duration, Disqualification and the Register
3 Age Limits, Certificate of Fitness and Insurance
3.1 Age Limits by Class and Visitor Driving 3.2 Certificate of Fitness 3.3 Compulsory Third-Party Insurance
4 Alcohol, Drugs and Mobile Phones
4.1 The Prescribed Alcohol Limit and Breath Testing 4.2 Drink-Drive Penalties and Disqualification 4.3 Hand-Held Mobile Phones (Section 37A)
5 The Rule of the Road (Left-Hand Traffic)
5.1 Keep Left, Meeting and Being Overtaken 5.2 Overtaking on the Right 5.3 Moving Off, Hold-ups and Lane Discipline 5.4 Cyclists, Animals and Carrying Passengers
6 Junctions, STOP/SLOW and Roundabouts
6.1 STOP, SLOW and YIELD 6.2 Look Right-Left-Right and Major-Road Priority 6.3 Roundabouts, Narrow Roads and Opposite-Direction Priority
7 Pedestrians, Crossings and Emergency Vehicles
7.1 Pedestrian Crossings (Regulation 189) 7.2 WALK Signals and School Safety Patrols 7.3 Emergency Vehicles and Police Directions
8 Speed Limits and Stopping Distances
8.1 Restricted, Open-Road and Highway Limits 8.2 Learner, Tractor and Posted Limits 8.3 Thinking Distance and Stopping Distance
9 Traffic Light Signals
9.1 Layout, Lenses and Sequence 9.2 Green, Amber, Red and the Green Arrow 9.3 Flashing Signals and the Stop Line
10 Driver and Rider Signals
10.1 Signals to Drivers Behind 10.2 Signals to Police and Traffic Ahead 10.3 When and Why to Signal
11 Road Markings and Words on the Road
11.1 White, Yellow, Broken and Continuous Lines 11.2 No-Overtaking Lines and Yellow-Bordered Areas 11.3 Road Words, Arrows and Look Left / Look Right
12 Warning Signs, Give Way and STOP
12.1 Warning Triangles: Geometry and Junctions 12.2 Animals, Road Works, Aircraft and Children 12.3 Give Way Triangle versus STOP Octagon
13 Prohibitory, Mandatory and Information Signs
13.1 No Entry, No Turns and No U-Turn 13.2 No Overtaking, Horn Ban and Speed-Limit Signs 13.3 Mandatory, Priority, Parking and Stopping Signs
14 Parking and Stopping
14.1 Where Parking and Stopping Are Prohibited 14.2 Alternate-Date Parking 14.3 Hills and Leaving the Vehicle
15 Defensive Driving
15.1 Preventable Collisions and the DDC Formula 15.2 Six Conditions: Light, Weather and Roads 15.3 Traffic, Vehicle, Driver and the Five Cs
16 Theory of Driving and Good Habits
16.1 The Good Driver, Mirrors and Concentration 16.2 Handbrake Uses and the Learner Start/Stop Drill 16.3 Night Driving and Lighting
17 Steering, Cornering and Control
17.1 Driving Position and Steering 17.2 Cornering: Left and Right Bends 17.3 Gears, Braking and Slopes
18 Vehicle Knowledge and Checks
18.1 Principal Parts, Lubrication and Cooling 18.2 Brakes, Steering and Suspension 18.3 Daily and Weekly Checks
19 Emergency First Aid
19.1 Crash-Scene Priorities and Examining the Casualty 19.2 Airway, Unconsciousness and the Recovery Position 19.3 Bleeding, Burns and Shock
20 Offences, Seat Belts and Accident Duties
20.1 Minor Traffic Offences 20.2 Seat Belts and Child Restraints 20.3 Reckless Driving, Careless Driving and Accident Duties
18.1 Principal Parts, Lubrication and Cooling
Key Takeaways Explain This Topic AI
The chassis is the vehicle's main frame; the operating components are attached to that frame, which is not the same as the painted body shell
Lubricating oil reduces friction and wear between moving engine parts; check the dipstick, keep the correct grade, and do not drive with low oil pressure
The cooling system is the radiator, water pump, fan, and thermostat working together; overheating is a stop-and-attend fault, not a hope-it-cools problem
Subject 7 of the GPF Theoretical Programme tests driver-level principles, not a full mechanic course, and those principles support Cap. 51:02 certificate-of-fitness duties
A vehicle that cannot lubricate or cool itself is one of the six defensive-driving conditions you still control: do not take it onto Georgetown streets, the East Bank, or the Soesdyke–Linden Highway
Last updated: September 2026
18.1 Principal Parts, Lubrication and Cooling
Quick Answer: The chassis is the vehicle's main frame with the operating components mounted on it. Lubricating oil reduces friction and wear . The cooling system is the radiator , water pump , fan , and thermostat working together against overheating .
The Guyana Police Force learner package lists principal parts of motor vehicles , lubrication , and the cooling system as Subject 7 , naming basic motor-vehicle principles (the programme points to V.A.W. Hiller) as the study source. This ExamFinch chapter is independent study of those topics, the Guyana Road Traffic Code , and certificate of fitness duties in the Motor Vehicles and Road Traffic Act, Cap. 51:02 . It is not a GPF publication and not a workshop apprenticeship. The electronic multiple-choice sitting wants working principles a driver can use in left-hand traffic on Georgetown streets, the East Bank and East Coast roads, the Soesdyke–Linden Highway , and crossings such as the Demerara Harbour Bridge and Canje Bridge .
Why this sits on a driving theory paper
Defensive driving in the same package names vehicle as one of the six conditions that are always present. You control only two of those six: the vehicle and yourself. A certificate of fitness (Cap. 51:02 ss.14–15) is issued when a certifying officer is satisfied the vehicle conforms to the prescribed conditions as to fitness . Driving on a road without a COF in force, or when those conditions are not fulfilled, is an offence . Naming what the main parts do is how you notice a defect before it becomes a crash in wet East Coast spray or in a slow queue at the harbour bridge.
You do not need to strip an engine in the examination room. You do need to name the chassis , explain why oil is there , and list the cooling parts whose failure becomes overheating.
The chassis and the other principal parts
Think of a motor vehicle as a structure plus systems . The chassis is the main frame . The engine, transmission, suspension, steering gear, and related operating components are attached to that frame. The body (cab and load space) is the shell that carries people and goods. Confusing the chassis with the painted body alone is a classic error: a dented door is bodywork; a cracked or twisted frame is a chassis problem, and it is a fitness problem.
On many passenger cars the body and frame are built as one unit, but the exam idea stays the same: the chassis is the structural assembly that carries the working parts. Goods vehicles and trailers make the picture even clearer — a load platform on a frame, with axles and brakes hung from that frame.
- Principal part What the theory exam expects you to know
- Chassis Main frame; operating components are attached to it
- Body Encloses occupants and load; not the same as the chassis
- Engine Converts fuel into useful power and, as a by-product, a great deal of heat
- Transmission Clutch, gearbox, and drive take that power to the road wheels
- Lubrication system Oil film reduces friction and wear
- Cooling system Radiator, pump, fan, and thermostat manage heat
- Brakes, steering, suspension Control and tyre contact — taught in 18.2
- Electrical system Battery, lights, horn, charging — taught in 18.3
The engine is the power unit. Petrol and diesel engines still dominate learner cars, hire cars, and many goods vehicles in Guyana. They burn fuel, move pistons, and turn a crankshaft. That motion is useless until the transmission — clutch (or torque converter), gearbox, propeller shaft or driveshafts, and final drive — delivers it to the wheels. You will meet transmission fluid again on the weekly checklist (Subject 9). For Subject 7, remember it is a principal part , not a mystery box you can ignore until a gear refuses to select on Mandela Avenue.
Steering, brakes, and suspension are also principal parts. They have their own subject (Subject 8) because they decide whether you can keep left , stop before a STOP line, and keep the tyres on the tarmac through a pothole. Electrical supply — battery, alternator or generator, wiring — runs the lights and horn the Code requires you to have in working order before you move off (Rule 68).
Lubrication: oil against friction and wear
Metal parts that spin or slide without an oil film grind, heat, and destroy themselves. Lubricating oil does three exam-level jobs:
It reduces friction so the engine does not waste power as heat and noise.
It reduces wear by keeping surfaces apart.
It helps carry heat and dirt away from bearings and cylinder walls. Oil is not a substitute for the cooling system, but a dry engine overheats as well as seizes.
Oil lives in the sump (oil pan) at the bottom of the engine. A pump pushes it through a filter and along galleries to the bearings, camshaft, and other moving parts, then it drains back. Your job as a driver is not to rebuild the pump. Your job is to check the level on the dipstick (engine off, vehicle on reasonably level ground, after a short wait so oil returns to the sump), keep the level between the marks, and use the grade specified for that engine and climate. Guyana heat, stop–go Georgetown traffic, and slow bridge queues make the correct grade and a healthy level more important, not less.
Low oil shows as a warning lamp or gauge, knocking, a burning smell, or a puddle under a parked car. Do not top the engine with drinking water, and do not ignore a red oil-pressure lamp until you "reach Linden." Stop as soon as it is safe, because running without oil pressure wrecks bearings in minutes and can leave you stranded in a live lane. Leaks belong on the daily walk-round: fresh oil on yard concrete is a clue; a mist of oil on the block is a clue; a completely dry dipstick is an emergency.
Over-filling is unwise as well. Excess oil can foam, blow past seals, and dirty the cooling system if it is burned. The exam principle is correct level, correct grade, no driving through a lubrication failure .
Cooling: radiator, pump, fan, thermostat
Combustion is hot. If that heat stays in the metal, the engine overheats : power falls, coolant boils, a head gasket can fail, and you may lose the vehicle in traffic. The cooling system moves heat into liquid coolant (water plus corrosion inhibitor in most modern cars — do not treat "any ditch water" as a plan) and dumps it to the air.
Four named parts work together:
The radiator is a heat exchanger at the front. Air passing through its fins cools the liquid inside.
The water pump (coolant pump) circulates that liquid through the engine passages and back to the radiator.
The fan pulls or pushes extra air through the radiator when forward speed is not enough — typical in Georgetown congestion, at lights, or in a slow queue on the Demerara Harbour Bridge .
The thermostat is a temperature valve. It stays closed until the engine reaches a sensible working temperature, then opens to let coolant flow to the radiator. Stuck closed , the engine overheats. Stuck open , the engine may run too cool, use more fuel, and wear faster — still a defect, even if there is no steam.
Hoses , a pressure cap , and a header or expansion tank complete the circuit. A split hose on the East Bank in the sun dumps coolant quickly. A missing or loose cap lets the system boil over.
Overheating signs include a temperature gauge in the hot zone or a warning lamp, steam or a sweet coolant smell from the grille, a falling coolant level, and a heater that blows cold because there is no hot water to circulate. Response: leave the traffic stream safely (keep left as the Code requires when you stop), switch off, and do not open a pressurised cap on a boiling system. Wait, then seek attention. Continuing "just as far as the next junction" on the Linden Highway with a boiling engine is how a breakdown becomes a high-speed hazard for everyone behind you.
The cooling system and the lubrication system support each other . Low oil increases friction-heat; a failed water pump lets heat destroy the oil film. Weekly coolant checks (18.3) catch a falling level before the gauge screams.
Exam discipline, not garage folklore
Subject 7 is principles . You will not be asked to quote an unpublished torque figure. You may be asked what a chassis is, why oil is there, and which parts cool the engine. Pair that knowledge with Cap. 51:02 fitness and with the Code reminder that a vehicle must be in such a condition that no danger is likely to you or others. If a principal part is not doing its job, you do not hope it holds across Canje Bridge — you treat it as a fitness and safety defect and you do not drive it until it is attended to.