Study guide

5.1 Hazard Analysis: Identification and Evaluation

HACCP Certification Hazard Analysis Critical Control Points

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts & Logistics 1.2 What Is HACCP? History, Codex, and Purpose 1.3 Core HACCP Definitions

2 HACCP System Foundation

2.1 Preventive HACCP vs Traditional Inspection 2.2 Management Commitment, Culture, and Training 2.3 Where HACCP Applies: Sectors and Supply Chain

3 Preliminary Steps: Team, Product, and Consumers

3.1 Assemble the HACCP Team 3.2 Describe the Food and Its Distribution 3.3 Intended Use and Consumers of the Food

4 Preliminary Steps: Flow Diagrams

4.1 Construct a Process Flow Diagram 4.2 On-Site Verification of the Flow Diagram

5 Principle 1: Conduct a Hazard Analysis

5.1 Hazard Analysis: Identification and Evaluation 5.2 Control Measures and Hazard Analysis Worksheets 5.3 Biological Hazards Overview and Growth Factors

6 Biological Pathogens: Salmonella, Listeria, and STEC

6.1 Salmonella and Campylobacter 6.2 Listeria monocytogenes 6.3 E. coli O157:H7 and Other STEC

7 Biological Pathogens: Clostridia, Staph, Bacillus, Viruses, Parasites

7.1 Clostridium botulinum and Clostridium perfringens 7.2 Staphylococcus aureus and Bacillus cereus 7.3 Norovirus, Hepatitis A, and Parasites

8 Chemical Hazards, Allergens, and Physical Hazards

8.1 Chemical Hazards and Natural Toxins 8.2 Food Allergens as Chemical Hazards 8.3 Physical Hazards and Detection Controls

9 Principles 2–3: CCPs and Critical Limits

9.1 Principle 2: Identify Critical Control Points 9.2 The CCP Decision Tree 9.3 Principle 3: Establish Critical Limits

10 Principles 4–5: Monitoring and Corrective Actions

10.1 Principle 4: Establish Monitoring Procedures 10.2 Continuous vs Discontinuous Monitoring and Responsibilities 10.3 Principle 5: Establish Corrective Actions

11 Principles 6–7: Verification and Record-Keeping

11.1 Principle 6: Establish Verification Procedures 11.2 Validation vs Verification 11.3 Principle 7: Record-Keeping and Documentation

12 Prerequisite Programs: Foundation, GMPs, and Sanitation

12.1 Prerequisite Programs as the HACCP Foundation 12.2 Current Good Manufacturing Practices (cGMPs) 12.3 SSOPs, Cleaning, and Sanitation

13 Prerequisite Programs: Hygiene, Suppliers, Allergens, and Traceability

13.1 Personal Hygiene, Employee Health, and Pest Control 13.2 Supplier Control, Receiving, Storage, and Shipping 13.3 Allergen Control, Traceability, Chemical Control, and Water

14 HACCP Plans and Regulatory Framework

14.1 Building the Written HACCP Plan 14.2 FDA and USDA Mandatory HACCP Programs 14.3 FSMA, HARPC, and Modern Food Safety Systems

15 Implementation, Critical Numbers, and Exam Strategy

15.1 Implementation, Maintenance, and Revalidation 15.2 Critical Temperatures and Numbers Review 15.3 Exam Traps, Scenarios, and Study Plan

5.1 Hazard Analysis: Identification and Evaluation

Key Takeaways Explain This Topic AI

NACMCF Principle 1 is a two-stage process: hazard identification (what could cause illness or injury) followed by hazard evaluation (severity × likelihood).

A food-safety hazard is a biological, chemical, or physical agent reasonably likely to cause illness or injury if uncontrolled—not a quality defect.

The HACCP team brainstorms potential hazards at every process step using the verified flow diagram, product description, ingredients, equipment, and intended use.

Only significant hazards—those both severe enough and reasonably likely—must be addressed in the HACCP plan; non-significant hazards may still be managed through PRPs.

Safety vs quality is a hard exam line: color, texture, and customer preference alone are not hazards unless they indicate a safety problem.

Last updated: July 2026

5.1 Hazard Analysis: Identification and Evaluation

Quick Answer: Principle 1 is a two-stage NACMCF process. First, identify potential biological, chemical, and physical hazards at every step of the verified flow diagram. Second, evaluate each hazard for severity and likelihood . Only significant hazards—those reasonably likely to cause illness or injury if uncontrolled—must be controlled in the HACCP plan. Quality defects alone are not food-safety hazards.

Principle 1 is the scientific engine of HACCP. Critical control points, critical limits, monitoring, and corrective actions only make sense after the team knows which hazards matter for this product and process. NACMCF’s HACCP Principles & Application Guidelines frame hazard analysis as collecting and evaluating information on hazards associated with the food under consideration to decide which are significant and must be addressed in the HACCP plan.

Official Hazard Definition (Safety, Not Quality)

Under NACMCF-aligned training materials used throughout U.S. HACCP certification:

Hazard: A biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control.

Key exam implications:

The endpoint is illness or injury (safety), not “customer complaints about taste.”

Biological examples: pathogenic bacteria, viruses, parasites, toxin-producing molds where relevant to illness.

Chemical examples: cleaning agents, pesticides, undeclared allergens, natural toxins, histamine, heavy metals at harmful levels.

Physical examples: metal, glass, hard plastic, bone fragments capable of injury.

Not hazards for HACCP purposes: slightly pale color, soft texture, uneven slice size, off-brand packaging aesthetics—unless those conditions signal a safety problem (for example, color change that indicates undercooking of a lethality step).

This safety vs quality distinction appears constantly on exams. Teams may still track quality in separate programs; those programs are not Principle 1.

Stage 1: Hazard Identification (Brainstorm by Step)

Identification is broad and systematic. Using the verified flow diagram and product/intended-use descriptions from the preliminary steps, the team works step by step and asks what hazards could be introduced , controlled , increased , or survive at that step.

How to brainstorm effectively

For each process step (receiving, storage, prep, cook, cool, package, ship, and so on), consider:

Ingredients and raw materials — pathogens in raw meat or produce; allergens in dairy or nuts; metal from supplier equipment; mycotoxins in grains; histamine risk in certain fish species.

Process activities — undercooking; incomplete acidification; temperature abuse during holding; cross-contamination from shared utensils; allergen cross-contact during changeover.

Equipment and environment — metal from grinders or slicers; glass from lights or gauges; biofilm niches; condensation dripping onto exposed product.

People and practices — ill food handlers (norovirus, Hepatitis A); bare-hand contact with ready-to-eat food; incorrect chemical use.

Packaging, storage, and distribution — package integrity failures; cold-chain breaks that allow pathogen growth; incorrect labels that fail to declare allergens.

Intended use and consumers — ready-to-eat vs cook-before-eating; higher-risk populations (infants, elderly, immunocompromised) may change how severe an outcome is judged.

Teams often use brainstorming first without immediately discarding ideas, then refine the list with science and plant experience. Input can include scientific literature, regulatory guidance, outbreak history, supplier specifications, and in-plant data.

Three hazard categories at every step

At each step, explicitly consider all three categories:

Category Typical agents Example process concern

Biological Pathogenic bacteria, viruses, parasites Survival through cook; growth during slow cool; recontamination of RTE

  • Chemical Cleaners, pesticides, allergens, toxins Sanitizer residue; undeclared peanut; scombroid histamine
  • Physical Metal, glass, hard plastic, bone Blade fragment; glass from jar; bone in ground product

Skipping a category at a step is a common plan weakness auditors and examiners look for.

Stage 2: Hazard Evaluation (Severity × Likelihood)

After listing potential hazards, the team evaluates each one. Evaluation answers: Is this hazard significant for our HACCP plan?

Severity

Severity is the seriousness of the health effect if the hazard is not controlled—magnitude and duration of illness or injury, potential for death, chronic sequelae, or population impact. Clostridium botulinum toxin and certain STEC infections rank high in severity; a small soft plastic film that is unlikely to injure may rank lower.

Likelihood of occurrence

Likelihood (probability of occurrence) considers whether the hazard is reasonably likely in the absence of control, given ingredients, process design, plant history, supplier performance, and consumer handling assumptions. “Theoretically possible anywhere in the universe” is not the standard— reasonably likely is.

Significance = severity combined with likelihood

A hazard is significant when severity and likelihood together warrant dedicated control in the HACCP plan. Patterns examiners expect you to reason through:

High severity + reasonable likelihood → usually significant (for example, Salmonella survival in undercooked poultry).

High severity + extremely remote likelihood under current process/PRPs → may not be significant for the plan (document the justification).

Low severity + high likelihood → often not a HACCP hazard if it does not cause illness or injury (quality issue).

Moderate severity that becomes critical for susceptible consumers → intended-use analysis can push significance upward (for example, Listeria in RTE food for hospital patients).

Only significant hazards must be addressed in the HACCP plan. That does not mean non-significant issues are ignored forever—they may be managed through prerequisite programs , supplier approval, quality specs, or good manufacturing practices. The plan stays focused so CCPs are not diluted.

Documenting the Judgment

NACMCF expects the team to record why a hazard is or is not significant. Written justification (often on a hazard analysis worksheet—covered in the next section) is part of a defensible plan. “We always did it this way” is not a scientific evaluation.

When the product, process, equipment, ingredients, or intended use changes, hazard analysis must be revisited . Principle 1 is not a one-time binder exercise.

Linking Principle 1 to Later Principles

Hazard analysis outputs feed everything that follows:

  • Significant hazards → candidates for CCP determination (Principle 2)
  • Understanding how a hazard is controlled → critical limits (Principle 3) and monitoring (Principle 4)
  • Knowing what failure looks like → corrective actions (Principle 5)

If Stage 1 or Stage 2 is shallow, later principles look precise on paper but fail to protect consumers.

Practical Mini-Example

Product: refrigerated cooked chicken salad (RTE). Step: cooking chicken pieces.

Identification: vegetative pathogens such as Salmonella and Campylobacter may be present in raw poultry and could survive if undercooked.

Evaluation: severe illness potential; likelihood of survival is reasonable without a controlled cook— significant .

Later (preview): cook step is a strong CCP candidate with time/temperature critical limits.

At a later assembly step, the same pathogens may re-enter via cross-contamination. That recontamination hazard is identified separately and evaluated with PRPs (hygiene, sanitation, traffic) and process design—not every control will become a CCP, but every significant hazard needs a clear control strategy.

Exam Focus

Expect questions that (1) state the two stages of Principle 1, (2) define hazard as illness/injury agents, (3) require severity × likelihood reasoning, (4) exclude pure quality defects, and (5) limit the HACCP plan to significant hazards while allowing PRPs to handle broader hygienic controls.