Study guide
9.1 Principle 2: Identify Critical Control Points
HACCP Certification Hazard Analysis Critical Control Points
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts & Logistics 1.2 What Is HACCP? History, Codex, and Purpose 1.3 Core HACCP Definitions
2 HACCP System Foundation
2.1 Preventive HACCP vs Traditional Inspection 2.2 Management Commitment, Culture, and Training 2.3 Where HACCP Applies: Sectors and Supply Chain
3 Preliminary Steps: Team, Product, and Consumers
3.1 Assemble the HACCP Team 3.2 Describe the Food and Its Distribution 3.3 Intended Use and Consumers of the Food
4 Preliminary Steps: Flow Diagrams
4.1 Construct a Process Flow Diagram 4.2 On-Site Verification of the Flow Diagram
5 Principle 1: Conduct a Hazard Analysis
5.1 Hazard Analysis: Identification and Evaluation 5.2 Control Measures and Hazard Analysis Worksheets 5.3 Biological Hazards Overview and Growth Factors
6 Biological Pathogens: Salmonella, Listeria, and STEC
6.1 Salmonella and Campylobacter 6.2 Listeria monocytogenes 6.3 E. coli O157:H7 and Other STEC
7 Biological Pathogens: Clostridia, Staph, Bacillus, Viruses, Parasites
7.1 Clostridium botulinum and Clostridium perfringens 7.2 Staphylococcus aureus and Bacillus cereus 7.3 Norovirus, Hepatitis A, and Parasites
8 Chemical Hazards, Allergens, and Physical Hazards
8.1 Chemical Hazards and Natural Toxins 8.2 Food Allergens as Chemical Hazards 8.3 Physical Hazards and Detection Controls
9 Principles 2–3: CCPs and Critical Limits
9.1 Principle 2: Identify Critical Control Points 9.2 The CCP Decision Tree 9.3 Principle 3: Establish Critical Limits
10 Principles 4–5: Monitoring and Corrective Actions
10.1 Principle 4: Establish Monitoring Procedures 10.2 Continuous vs Discontinuous Monitoring and Responsibilities 10.3 Principle 5: Establish Corrective Actions
11 Principles 6–7: Verification and Record-Keeping
11.1 Principle 6: Establish Verification Procedures 11.2 Validation vs Verification 11.3 Principle 7: Record-Keeping and Documentation
12 Prerequisite Programs: Foundation, GMPs, and Sanitation
12.1 Prerequisite Programs as the HACCP Foundation 12.2 Current Good Manufacturing Practices (cGMPs) 12.3 SSOPs, Cleaning, and Sanitation
13 Prerequisite Programs: Hygiene, Suppliers, Allergens, and Traceability
13.1 Personal Hygiene, Employee Health, and Pest Control 13.2 Supplier Control, Receiving, Storage, and Shipping 13.3 Allergen Control, Traceability, Chemical Control, and Water
14 HACCP Plans and Regulatory Framework
14.1 Building the Written HACCP Plan 14.2 FDA and USDA Mandatory HACCP Programs 14.3 FSMA, HARPC, and Modern Food Safety Systems
15 Implementation, Critical Numbers, and Exam Strategy
15.1 Implementation, Maintenance, and Revalidation 15.2 Critical Temperatures and Numbers Review 15.3 Exam Traps, Scenarios, and Study Plan
9.1 Principle 2: Identify Critical Control Points
Key Takeaways Explain This Topic AI
A CCP is a step at which control can be applied and is essential to prevent, eliminate, or reduce a significant hazard to an acceptable level.
Common CCP examples include cooking, cooling, metal detection, and formulation steps that set pH or water activity for safety.
Not every control point is a CCP: many process steps control quality or support safety without being essential for a significant hazard.
Prerequisite programs (PRPs) manage the hygienic foundation; CCPs sit in the HACCP plan for hazards that require essential process control.
Different facilities, products, and process designs can legitimately have different CCPs for the same general product type.
Last updated: July 2026
9.1 Principle 2: Identify Critical Control Points
Quick Answer: A Critical Control Point (CCP) is a step at which control can be applied and is essential to prevent, eliminate, or reduce a significant food-safety hazard to an acceptable level. Cooking, cooling, metal detection, and safety-critical formulation (for example pH or water activity) are classic CCP candidates. Ordinary control points and PRPs are important, but they are not automatically CCPs.
After Principle 1 names the significant hazards for each process step, Principle 2 asks a harder operational question: Where must control be applied so that this product is safe? NACMCF’s HACCP Principles & Application Guidelines define a CCP as a point, step, or procedure at which control can be applied and is essential to prevent or eliminate a food-safety hazard or reduce it to an acceptable level. That definition is the exam and industry standard.
What Makes a Step a CCP?
Three ideas sit inside the definition:
Control can be applied at that step — there is a measurable action or condition the plant can set, check, and document (temperature/time, pH, screen size, detector sensitivity, and so on).
The step is essential for safety — if control fails at this step and is not reliably achieved later, the significant hazard is reasonably likely to cause illness or injury.
The target is a significant hazard already justified in Principle 1 — CCPs are not invented for quality defects, customer preference, or “we always check here.”
If any of those three fail, the step is usually not a CCP, even if the plant wisely monitors it.
- Classic CCP Examples (and Why They Fit)
- Cooking (lethality / thermal process)
A validated cook step for raw ground beef, poultry, or a ready-to-eat (RTE) product often is a CCP when cooking is the primary lethality step against vegetative pathogens such as Salmonella or STEC. Control is applied as time and temperature; the step is essential because pathogens that survive cooking may not be eliminated later.
Cooling
Cooling of cooked product can be a CCP when the significant hazard is spore-forming pathogens (for example Clostridium perfringens or C. botulinum ) that germinate and multiply if product stays too long in the temperature danger zone. The control is time-and-temperature profile during cool-down.
Metal detection (or equivalent physical-hazard control)
Where metal fragments are a significant physical hazard and detection/rejection at a defined step is essential before packaging or shipping, metal detection is frequently designated a CCP. The control is calibrated detection sensitivity plus rejection of nonconforming product.
Formulation for safety (pH, water activity, salt, preservatives)
When product safety depends on achieving a maximum pH, maximum water activity (aw), minimum salt or acid level, or another formulation parameter that prevents pathogen growth or toxin production, that formulation or acidification step can be a CCP. Example thinking: acidifying a product so C. botulinum cannot grow under intended distribution conditions.
Other legitimate CCP candidates (facility-specific): pasteurization; commercial sterilization; irradiation where used as the lethality step; sieve or filter steps that are the last essential control for a significant physical hazard; labeled allergen declaration only when the plan treats labeling as the essential control for undeclared allergen risk (many plants instead manage allergens primarily through PRPs—do not assume).
CCP vs Control Point vs Prerequisite Program
Exam traps often mix three layers of control:
Concept Role Typical examples
CCP Essential control of a significant hazard in the HACCP plan ; failure requires corrective action on product/process Cook lethality; cool-down for spore formers; metal detect before ship
Control point (CP) Any step where biological, chemical, or physical factors can be controlled; may support quality or safety without being essential for a significant hazard Visual inspection for trim quality; optional metal check when a later essential detector exists; target cook above the safety minimum for product quality
Prerequisite program (PRP) Foundational hygienic and process conditions (GMPs, SSOPs, supplier control, pest control, training, etc.) that reduce general contamination pressure Handwashing; equipment sanitation; pest exclusion; approved suppliers; cold storage of raw materials under GMP
Key distinctions:
Every CCP is a control point, but not every control point is a CCP. Criticality requires essential control of a significant hazard.
PRPs keep the environment and operations under control so HACCP can focus on the few steps that must work. A sanitation failure can still cause a crisis, but sanitation is usually managed as a PRP/SSOP, not as a CCP for every product step—unless the hazard analysis shows that a specific sanitation-related control is the essential CCP for a significant hazard (unusual, but possible in specialized designs).
Do not multiply CCPs to look thorough. Too many CCPs dilute monitoring resources and confuse operators. Too few leave significant hazards without essential control. The right number is justified by science and process design , not by copying a competitor’s plan.
Process Design Drives CCP Selection
Two plants making “similar” products can have different CCPs :
Plant A cooks raw poultry to a validated lethality and packages it refrigerated → cooking (and possibly cooling) may be CCPs.
Plant B receives fully cooked product and only slices and packs under sanitation controls → there may be no cook CCP; significant hazards may be controlled at receiving temperature, metal detection, or allergen labeling depending on the analysis.
Plant C relies on low pH and low aw for ambient-stable safety rather than a kill step → formulation parameters may be CCPs instead of cooking.
CCPs follow this facility’s verified flow diagram, ingredients, equipment, and intended use—not a generic industry checklist pasted without review.
Principle 2 Outputs for the Plan
When Principle 2 is complete, the team should be able to list, for each significant hazard, the process step(s) designated as CCPs and a brief justification (why control is essential here ). That list feeds Principle 3 (critical limits), Principle 4 (monitoring), and Principle 5 (corrective actions). If the team cannot explain why a step is essential, it is not ready to be called a CCP.