Study guide
11.3 Principle 7: Record-Keeping and Documentation
HACCP Certification Hazard Analysis Critical Control Points
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts & Logistics 1.2 What Is HACCP? History, Codex, and Purpose 1.3 Core HACCP Definitions
2 HACCP System Foundation
2.1 Preventive HACCP vs Traditional Inspection 2.2 Management Commitment, Culture, and Training 2.3 Where HACCP Applies: Sectors and Supply Chain
3 Preliminary Steps: Team, Product, and Consumers
3.1 Assemble the HACCP Team 3.2 Describe the Food and Its Distribution 3.3 Intended Use and Consumers of the Food
4 Preliminary Steps: Flow Diagrams
4.1 Construct a Process Flow Diagram 4.2 On-Site Verification of the Flow Diagram
5 Principle 1: Conduct a Hazard Analysis
5.1 Hazard Analysis: Identification and Evaluation 5.2 Control Measures and Hazard Analysis Worksheets 5.3 Biological Hazards Overview and Growth Factors
6 Biological Pathogens: Salmonella, Listeria, and STEC
6.1 Salmonella and Campylobacter 6.2 Listeria monocytogenes 6.3 E. coli O157:H7 and Other STEC
7 Biological Pathogens: Clostridia, Staph, Bacillus, Viruses, Parasites
7.1 Clostridium botulinum and Clostridium perfringens 7.2 Staphylococcus aureus and Bacillus cereus 7.3 Norovirus, Hepatitis A, and Parasites
8 Chemical Hazards, Allergens, and Physical Hazards
8.1 Chemical Hazards and Natural Toxins 8.2 Food Allergens as Chemical Hazards 8.3 Physical Hazards and Detection Controls
9 Principles 2–3: CCPs and Critical Limits
9.1 Principle 2: Identify Critical Control Points 9.2 The CCP Decision Tree 9.3 Principle 3: Establish Critical Limits
10 Principles 4–5: Monitoring and Corrective Actions
10.1 Principle 4: Establish Monitoring Procedures 10.2 Continuous vs Discontinuous Monitoring and Responsibilities 10.3 Principle 5: Establish Corrective Actions
11 Principles 6–7: Verification and Record-Keeping
11.1 Principle 6: Establish Verification Procedures 11.2 Validation vs Verification 11.3 Principle 7: Record-Keeping and Documentation
12 Prerequisite Programs: Foundation, GMPs, and Sanitation
12.1 Prerequisite Programs as the HACCP Foundation 12.2 Current Good Manufacturing Practices (cGMPs) 12.3 SSOPs, Cleaning, and Sanitation
13 Prerequisite Programs: Hygiene, Suppliers, Allergens, and Traceability
13.1 Personal Hygiene, Employee Health, and Pest Control 13.2 Supplier Control, Receiving, Storage, and Shipping 13.3 Allergen Control, Traceability, Chemical Control, and Water
14 HACCP Plans and Regulatory Framework
14.1 Building the Written HACCP Plan 14.2 FDA and USDA Mandatory HACCP Programs 14.3 FSMA, HARPC, and Modern Food Safety Systems
15 Implementation, Critical Numbers, and Exam Strategy
15.1 Implementation, Maintenance, and Revalidation 15.2 Critical Temperatures and Numbers Review 15.3 Exam Traps, Scenarios, and Study Plan
11.3 Principle 7: Record-Keeping and Documentation
Key Takeaways Explain This Topic AI
Principle 7 establishes record-keeping and documentation procedures that prove the HACCP system was designed and operated correctly.
Core document sets include the hazard analysis summary, the written HACCP plan (team, product description, flow diagram, CCP summary table), support/validation documents, and operational records for monitoring, corrective actions, and verification.
The HACCP plan summary table typically columns CCP, significant hazard, critical limits, monitoring (what/how/frequency/who), corrective actions, verification, and records.
Records support verification, audits, regulatory inspection, trend analysis, and due diligence after deviations or incidents.
Records must be accurate, timely, attributable (who/when), retained for required periods, and protected from loss or unauthorized alteration.
Last updated: July 2026
11.3 Principle 7: Record-Keeping and Documentation
Quick Answer: Principle 7 establishes record-keeping and documentation for the HACCP system. Keep a hazard analysis summary , a written HACCP plan (team, product, flow diagram, CCP summary table ), support/validation documents , and operational records for monitoring, corrective actions, and verification . If it is not documented, auditors and investigators treat control as unproven.
Principles 1–6 design, run, and check the system. Principle 7 makes the system defensible and reviewable . Records are how verification happens, how regulators evaluate compliance, how plants trend problems, and how teams prove due diligence after a deviation or complaint.
Why Records Matter
Evidence of control — show critical limits were met (or deviations corrected) for lots produced.
Verification fuel — record review is a primary verification activity; no records means weak verification.
Traceability of decisions — why a step is a CCP, why a limit is set, who approved plan changes.
Regulatory and customer audits — mandatory HACCP programs (for example FDA seafood/juice, USDA meat/poultry) and many commercial schemes expect complete, retrievable HACCP documentation.
Continuous improvement — trends in deviations, calibration failures, and audit findings guide training and revalidation.
“Mental notes” and sticky notes on the oven are not a HACCP record system.
Four Record/Document Families
Organize documentation the way examiners and auditors expect.
1. Hazard analysis summary (Principle 1 output)
Document identification and evaluation of hazards for each process step: which hazards are significant, why, and what control measures apply. The hazard analysis is the scientific and logical foundation of CCP selection. Keep it current when the process, ingredients, or intended use change.
2. The written HACCP plan
A complete plan package typically includes:
- Plan element What it captures
- HACCP team Members, roles, expertise (multidisciplinary)
- Product description Food, ingredients, processing, packaging, shelf life, distribution
- Intended use / consumers Normal use and susceptible populations when relevant
- Verified flow diagram Process steps from receiving through shipping
- CCP determination Which steps are CCPs for which significant hazards
- HACCP plan summary table One-line operational control for each CCP (see below)
- Supporting procedures Forms, SOPs for monitoring, CA, verification as needed
- 3. Support and validation documents
These prove why the plan works:
Scientific literature citations and summaries.
Regulatory performance standards and guidance used for limits.
Process authority letters or expert opinions with technical basis.
In-plant validation studies (heat penetration, challenge data, detector capability).
Prerequisite program references that support the hazard analysis (not a substitute for CCP records).
Support documents are part of the documentation system even when they are not filled out every shift.
4. Operational records (day-to-day evidence)
- Record type Purpose
- CCP monitoring records What was measured, when, by whom, actual values vs critical limits
Corrective action records Deviation description, product disposition, cause, actions to prevent recurrence, who/when
Verification records Calibration, record-review signatures, audit reports, observation notes, verification test results
Plan modification records What changed, why, who approved, effective date, training on the change
Operational records must be filled at the time of the activity (or as close as practical), not reconstructed days later from memory.
The HACCP Plan Summary Table (Know the Columns)
The summary table (also called the HACCP plan form or master CCP table) is a high-frequency exam and workplace artifact. For each CCP , rows typically capture:
- Column Content
- CCP Step name/number (e.g., CCP-1 Cooking)
- Significant hazard(s) Hazard controlled at this CCP
- Critical limits Measurable max/min values with units
- Monitoring What is measured, how , frequency , who
- Corrective actions Planned actions for deviations (product + process + prevention)
- Verification Activities that verify this CCP/system element (calibration, review, testing, audit)
- Records Which forms/logs capture monitoring, CA, and verification for this CCP
Memorize the column logic: CCP → hazard → CL → monitor → CA → verification → records . If a quiz lists those headers, you should recognize them as the HACCP plan summary , not random quality forms.
Good Record Practices
Strong systems share attributes auditors look for:
Accurate — true values; no “pencil whipping” or pre-signing blank forms.
Complete — all required fields; no silent gaps during production.
Timely — recorded when the check occurs.
Attributable — legible identity of the person (and reviewer) and date/time.
Consistent — units and formats match the critical limit (e.g., °F vs °C).
Secure and retained — protected from loss, damage, or unauthorized changes; retained for the period required by regulation, customers, or company policy (often at least the product shelf life plus a defined margin—confirm applicable rules for your sector).
Reviewable — stored so verification staff can retrieve lot history quickly.
Electronic systems are acceptable when they preserve integrity (access control, audit trails, backup). Paper systems work when controlled and legible. Hybrid systems must still meet the same principles.
What Principle 7 Is Not
Not only training attendance sheets (those support PRPs/competence; HACCP still needs CCP and plan records).
Not only finished-product lab certificates without CCP monitoring history.
Not marketing testimonials or customer praise emails.
Not a photocopy of another plant’s plan with no product-specific hazard analysis.
Linking Principles 6 and 7
Verification uses records; records prove verification and monitoring occurred:
Calibration activity (P6) → calibration log (P7).
Daily review of cook sheets (P6) → reviewer signature block on the monitoring form (P7).
System audit (P6) → audit report filed with findings and closures (P7).
Validation study (scientific element of P6) → study report in the support document file (P7).
A plant can claim verification procedures exist, but without Principle 7 documentation those claims fail inspection.
Practical Record Flow for One CCP (Cook Example)
Plan documents list CCP Cooking, pathogen hazard, time/temperature CL, monitoring method, CA, verification, and form numbers.
Operator records each required temperature/time on the cook log during production.
Deviation (if any) generates a corrective-action record with disposition.
QA reviews the log, initials verification review, checks thermometer calibration status.
Audit samples the cook CCP against the summary table and support validation file.
Change (new oven) triggers revalidation documentation and plan revision records.
That chain is the living HACCP system in documentary form.
Principle 7 Closure Checklist
Hazard analysis documented and current.
HACCP plan includes team, product, intended use, verified flow, and CCP summary table with CCP / hazard / CL / monitoring / CA / verification / records columns.
Validation and scientific support documents on file.
Monitoring, corrective-action, and verification records defined, used, reviewed, and retained.
Record integrity practices (timely, attributable, secure) trained and enforced.
Master Principle 7 and you can reconstruct the entire HACCP story from paper and data alone—which is exactly what exams, auditors, and outbreak investigators will try to do.