Study guide
1.1 Current Exam Facts
Hazardous Materials Technician Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Technician Role and Response Levels 1.3 NFPA 470, OSHA HAZWOPER, and APIE-T
2 Hazard Identification Systems
2.1 DOT Hazard Classes 1–9 2.2 Placards, Labels, and GHS Pictograms 2.3 UN/NA Numbers and NFPA 704 2.4 SDS and Shipping Papers
3 Reference Sources and Chemical Properties
3.1 Emergency Response Guidebook (ERG 2024) 3.2 Collecting and Interpreting Hazard Information 3.3 Chemical and Physical Properties for Responders
4 Containers, Damage, and Behavior
4.1 Container Recognition 4.2 Container Damage Assessment 4.3 Predicting Material and Container Behavior 4.4 Estimating the Endangered Area
5 PPE Ensembles and Chemical Protective Clothing
5.1 EPA/OSHA PPE Levels A–D 5.2 Chemical Protective Clothing Types and NFPA Standards 5.3 Permeation, Penetration, Degradation, and Compatibility 5.4 Respiratory Protection: SCBA and Air-Purifying Respirators
6 PPE Selection and Operations
6.1 Selecting Technician-Level PPE 6.2 Donning, Doffing, and Working in PPE 6.3 Heat Stress, Work/Rest, and the Buddy System 6.4 PPE Programs and Medical Surveillance
7 Decontamination Fundamentals
7.1 Contamination vs Exposure 7.2 Emergency Decontamination 7.3 Technical Decontamination and Corridor Setup 7.4 Decontamination Methods and Solutions
8 Mass Decontamination and Effectiveness
8.1 Mass Decontamination 8.2 Equipment Decon and Runoff Control 8.3 Evaluating Decontamination Effectiveness
9 Product Control Fundamentals
9.1 Containment vs Confinement 9.2 Confinement Techniques 9.3 Plugging and Patching 9.4 Overpacking Nonbulk and Radioactive Packages
10 Offensive Control and Rescue
10.1 Pressurized Containers and Chlorine Kits A/B/C 10.2 MC 306/DOT 406 Dome Clamp, Grounding, and Bonding 10.3 Liquid Product Transfer 10.4 Victim Rescue and Recovery in the Hot Zone
11 Air Monitoring Fundamentals
11.1 Monitoring Strategy, Bump Tests, and Calibration 11.2 Four-Gas Meters and Combustible Gas Indicators 11.3 Photoionization and Flame Ionization Detectors
12 Specialized Detection
12.1 Colorimetric Detector Tubes 12.2 Radiation Types and Detection Instruments 12.3 Interpreting Monitoring Data and Instrument Limits
13 Toxicology Fundamentals
13.1 Routes of Exposure 13.2 Dose-Response, Acute vs Chronic Effects 13.3 Exposure Limits: PEL, TLV, STEL, Ceiling, IDLH, REL
14 Health Effects and CBRN Hazards
14.1 Chemical Health Effects and Target Organs 14.2 Biological Hazards and CBRN/WMD Agents
15 Incident Command and Site Control
15.1 ICS Structure for Hazmat Incidents 15.2 Control Zones and the Site Safety Plan 15.3 Incident Action Plan and Response Objectives
16 Evaluation and Termination
16.1 Evaluating and Reporting Progress 16.2 Termination, Documentation, and Evidence Preservation
1.1 Current Exam Facts
Key Takeaways Explain This Topic AI
Alabama Fire College, CDP, and IAFF written exams use 100 multiple-choice knowledge items with a 70% passing score; skills evaluation is pass/fail.
NFPA 470 (2022) Chapter 11 is the current technician professional-qualification chapter; a Pro Board document dated 08-20-2024 tests Chapter 11 with Awareness (Chapter 5) and Operations (Chapter 7) as prerequisites.
OSHA 29 CFR 1910.120(q)(6)(iii) requires at least 24 hours equal to operations plus technician competencies; typical fire-service technician courses run 40–80 hours.
After CDP PER-272, skills, and the Alabama Fire College 100-question test, candidates pay a $50.00 AFC fee and request score release at testing@alabamafirecollege.org .
BLS reports hazardous materials removal workers earned a $48,490 median wage in May 2024 (51,300 jobs; 1% projected growth 2024–2034; about 5,000 openings per year); fire-department technicians are often classified as firefighters (2024 median $59,530).
Last updated: August 2026
The Hazardous Materials Technician Certification is a fire-service professional qualification, not a single national computer-based test sold by one vendor. In 2026 you earn it through accredited entities of the National Board on Fire Service Professional Qualifications (Pro Board) and/or the International Fire Service Accreditation Congress (IFSAC) — typically a state fire academy, the Alabama Fire College (AFC) , the Federal Emergency Management Agency Center for Domestic Preparedness (CDP) , the International Association of Fire Fighters (IAFF) , or the Texas A&M Engineering Extension Service (TEEX) .
The current standard is National Fire Protection Association (NFPA) 470 , Hazardous Materials/Weapons of Mass Destruction (WMD) Standard for Responders , 2022 edition . Technician Job Performance Requirements (JPRs) live in Chapter 11 . Awareness is Chapter 5 and Operations is Chapter 7. A Pro Board document updated 08-20-2024 states that Technician tests Chapter 11 and that Chapters 5 and 7 are the prerequisites. Older textbooks, some course catalogs, and even stale marketing still cite NFPA 1072 Chapter 7 or NFPA 472 technician competencies. Those citations are legacy . NFPA 470 consolidated NFPA 472, NFPA 473, and NFPA 1072. Study this guide against 470/2022 so a 1072 chapter number does not trap you on test day.
Written exam, skills, and timing
On the AFC, CDP, and IAFF paths, the written exam is 100 multiple-choice knowledge items. You need 70% to pass. The practical/skills evaluation is pass/fail . A 92% written score does not excuse a failed leak-control, personal protective equipment, or decontamination station. Time limits vary by certifying entity ; a typical written window is 2–3 hours . There is no single national timer and no published national pass rate. Treat “70% plus skills” as the common bar, then read your entity’s candidate bulletin.
Remote testing is generally not how Pro Board/IFSAC fire-service technician testing works. You sit a proctored written exam and complete skills in person. Retake rules also vary by accredited entity. On the AFC/CDP path , candidates may have up to 3 attempts , 15 business days apart. Do not treat that pattern as a universal Pro Board national rule.
OSHA’s 24-hour floor is not a 40-hour course
Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120(q)(6)(iii) (eCFR current through 2026-08-19 ) says hazardous materials technicians respond to stop the release . They are more aggressive than operations-level responders: they approach the point of release to plug, patch, or otherwise stop it. Training is at least 24 hours equal to first responder operations level AND competency in nine listed areas (A) through (I). That 24-hour figure is a regulatory minimum , not the typical fire-service technician course. Fire academies and national providers run 40–80 hours of technician training on top of Awareness and Operations. If a classmate claims “OSHA only requires 24 hours, so a weekend class is enough,” they are mixing the floor with the professional-qualification path this exam actually tests.
The employer must certify technician competency. Certification through Pro Board or IFSAC is how many fire departments document that duty. It does not replace the employer’s Emergency Response Plan (ERP) or medical-surveillance obligations under 1910.120.
2026 provider paths
Match your registration to the entity that will actually test you. Hours, tuition, and seals differ; the written-plus-skills pattern is shared.
Provider (2026) Contact hours What you test Cost notes
CDP PER-272 (Anniston, AL) 40 Pro Board and IFSAC through AFC: 100-question written + skills Federally funded training for eligible responders; AFC certification fee $50.00 after course, skills, and written test
IAFF HazMat Technician 80 (10-day) 100 knowledge items, 70% written + skills; Pro Board seal Union/department-sponsored; NFPA 470 (2022) Chapter 11 and OSHA 1910.120
TEEX HAZ020 (College Station) 40.00 Pro Board written + skills; 100% attendance Listed 2026 tuition $1,985 ; catalog still cites NFPA 1072 Chapter 7 and 29 CFR 1910.120(q)(6)(iii)
AFC / state fire academies Typically 40–80 Pro Board and/or IFSAC knowledge + skills AFC lists 18 years of age; Awareness and Operations or Alabama Certified Fire Fighter I / Volunteer Fire Fighter
CDP PER-272 (FEMA page last updated 2026-08-04 ) is a five-day course based on NFPA 470. Hands-on work includes Level A and Level B personal protective equipment (PPE) , drum leaks, pressurized containers, an MC 306/DOT 406 dome cover, and technical and mass decontamination. Prerequisites include PER-322 or NFPA 470-conformant operations training, the IS-100 series, the IS-200 series, and the physical ability to lift about 50 lb , wear self-contained breathing apparatus (SCBA) , and operate in confined spaces. After you pass the CDP course, the skills evaluation, and AFC’s 100-question test, you contact AFC Registration, pay $50.00 , and request score release at testing@alabamafirecollege.org .
IAFF is the longer path: 10 days, 80 hours , NFPA 470 (2022) Chapter 11, OSHA 1910.120, 100 knowledge items, 70% written plus skills, and a Pro Board seal on the certificate. TEEX HAZ020 is 40.00 hours with 100% attendance. For Pro Board at TEEX, the prerequisite is NFPA 1072 Chapter 5 Operations or NFPA 472 operations (2002, 2008, or 2013 editions) dated before the last class day — another reminder that legacy edition years still appear on registration forms even though 470/2022 Chapter 11 is the current technician JPR chapter.
AFC course pages commonly list three texts: Hazardous Materials: Managing the Incident , 5th edition; the current Emergency Response Guidebook (ERG) ; and the National Institute for Occupational Safety and Health (NIOSH) Pocket Guide . The current PHMSA guidebook is the ERG 2024 . Bring the edition your entity names, not a 2016 or 2020 copy from the apparatus bay.
Career context (read the occupation label)
The U.S. Bureau of Labor Statistics (BLS) Occupational Outlook Handbook for Hazardous Materials Removal Workers (last modified 2025-08-28 ) reports a median annual wage of $48,490 in May 2024, employment of 51,300 in 2024, projected growth of 1% from 2024 to 2034 (slower than average), and about 5,000 openings per year. Related-occupation firefighters had a 2024 median of $59,530 . Fire-department hazmat technicians are often classified as firefighters , not solely as “hazmat removal workers.” Use the BLS removal-worker numbers for industrial and cleanup roles; do not quote $48,490 as “the firefighter hazmat-tech salary.”
How to register without wasting a cycle
Confirm you already hold Awareness and Operations (NFPA 470 Chapters 5 and 7, or a documented 472/1072 equivalent your entity still accepts).
Pick one accredited path — CDP, IAFF, TEEX, AFC, or your state academy — and read that bulletin for hours, attendance, photo ID, and fees.
Complete the technician course with 100% attendance where required.
Pass skills and the 100-item / 70% written exam on the AFC/CDP/IAFF pattern.
Pay the entity’s certification fee (AFC $50.00 on the CDP path) and confirm your name is submitted to the Pro Board and/or IFSAC registry.
This guide’s later chapters follow NFPA 470 Chapter 11 JPRs and OSHA 1910.120(q)(6)(iii) competencies (A)–(I). Logistics differ by academy; the offensive technician role does not.